• 정보처리학회논문지C
• /
• 제13C권7호
• /
• pp.905-912
• /
• 2006

공유형 트리(Shared Tree)를 구성하여 멀티캐스트 서비스를 제공하는 CBT(Core Based Tree)와 PIM-SM(Protocol Independent Multicast-sparse Mode) 프로토콜에서는 랑데부 라우터(RP: Rendezvous Point)의 위치에 따라 전체 네트워크의 효율성이 결정된다. 본 논문에서는 멀티 캐스트 데이터 전송을 위하여 필요한 라우팅 테이블의 크기(테이블 내 entries의 수)를 최소화하고, 소스-멤버 사이의 비용을 일정한 범위 내로 관리할 수 있는 새로운 RP 선정 알고리즘을 제안한다. 성능분석 결과, 비용만을 고려하는 기존의 방법에 비하여 총비용은 5.37%, 라우팅 테이블의 크기는 13.35%까지 줄일 수 있음을 알 수 있다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.211-212
• /
• 2006

Production components fabricated by metal powder injection molding are analyzed for features to identify the design window for this powder technology. This reverse approach lets the designer see where PIM has a high probability to succeed. The findings show that the most suitable components tend to be less than 25 mm in size and less than 10 g in mass, are slender, and have high complexity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.507-508
• /
• 2010

• 대한전자공학회논문지SP
• /
• 제37권1호
• /
• pp.16-26
• /
• 2000

영상에서 관심영역을 추출하여 그 부분에만 워터마크 정보를 넣는다. 관심영역은 영상의 복잡도플 나타내는 방법중의 하나인 PIM(picture information measure)을 변형하여 사용한다 이렇게 추출된 영역에 대하여 DCT(discrete cosine transform)를 이용하여 주파수 공간으로 신호를 변형시킨 후, DCT 계수 값들의 성질인 방향성 정보와 주파수 특성을 이용해 워터마크 정보를 넣는다 기존에 제안된 방법의 단점은 영상의 특징을 사용하지 않고 영상의 전 부분에 걸쳐 워터마크 정보를 넣었기 때문에 영상의 왜곡이 심하다 세안된 방법은 영상의 특징을 이용하기 때문에 영상의 왜곡을 줄일 수 있었다 그리고 영상의 재표본화(resampling), 잡음과 같은 신호처리에 의한 변화에도 강인함을 보여준다 또한 블록에 기반 하여 워터마크를 집어넣기 때문에 JPEG이나 MPEG과 같은 영상의 압축에도 강인한 성질을 갖는 것을 확인 할 수 있었다

• 한국분말재료학회지
• /
• 제2권1호
• /
• pp.19-28
• /
• 1995

Powder forging is a combined technology of powder metallurgy and precision hot forging. Recently, the technology is developing rapidly because of its economic merits, especially in automotive part manufacturing. In the present study, the finite element technique was developed to predict density variation during P/M forging and the technique was applied to analysis of forging of a P/M connecting rod. Although deformation mode of the connecting rod was quite complex, several sections were selected and analyzed under an assumption of asymmetric or plane strain deformation. It was found that some modifications were necessary on the cross section of the beam portion. Therefore, the cross section was modified repeatedly until a satisfactory result of the analysis was obtained. On the other hand, no modifications were necessary in the ring and the pin portions. It is anticipated that the developed technique can be used to optimize preform design and manufacturing processes in P/M forging, which are highly critical to produce successful products in practice.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.681-685
• /
• 2008

Kromasil KR100-5CHI-TBB 칼럼을 사용하여 라세미 mandelic acid를 분리하였다. 분리도(resolution), 이론단수(number of theoretical plates), 용량인자(capacity factor)와 같은 크로마토그라피 변수들을 이동상의 조성(hexane/t-BME = 85/15 - 10/90)과 포름산 농도(0.1, 0.5, 1.0 v/v%)를 변화시켜 실험하여 계산하였다. 칼럼의 효율을 평가하기 위해 유속 대 이론단수를 비교하였다. 등온흡착식을 계산하기 위해 PIM(Pulse Input Method)을 사용하였고, mandelic acid의 농도가 0.1에서 0.3 mg/ml 사이일 때 L-과 D-mandelic acid가 각각 8.8분과 9.4분의 체류시간을 보였다. Mandelic acid의 등온흡착식은 0.3 mg/ml의 농도이하와 이동상 조성(hexane/t-BME = 75/25)에서 선형이었다. Mandelic acid의 농도가 증가할수록 mandelic acid는 비선형 거동을 보였고, Langmuir 등온흡착식은 L-과 D-mandelic acid의 경우 각각 $C_{S,L}=3.358C_{M,L}/(1+0.0897C_{M,L})$, $C_{S,D}=3.692C_{M,D}/(1+0.1457C_{M,D})$이었다.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.153-158
• /
• 2018

At the Bank of Korea, capital stock statistics were created by the PIM (perpetual inventory method) with fixed capital formation data. Asset classifications also included 2 categories in residential buildings, 4 non-residential buildings, 14 constructions, 9 transportation equipment, 28 machinery, and 2 intangible fixed assets. It is the Korean government accounting system which is developed much with the field of the national accounts including the valuation, but until 2008 it was consistent with single-entry bookkeeping. Many countries, including Korea, were single-entry bookkeeping, not double-entry bookkeeping which can be aggregated by government accounting standard account. There was no distinction in journaling between revenue and capital expenditure when it was consistent with single-entry bookkeeping. For example, we would like to appropriately divide the past budget accounts and the settlement accounts data that have been spent on dredging into capital expenditure and revenue expenditure. It, then, tries to add the capital expenditure calculated to FCF (fixed capital formation), because revenue expenditure is cost for maintenance etc. This could be a new direction, especially, in the estimation of capital stock by the perpetual inventory method for infrastructure (SOC, social overhead capital). It should also be noted that there are differences not only between capital and income expenditure but also by other factors. How long will this difference be covered by the difference between the 'new series' and 'old series' methodologies? In addition, there is no large difference between two series by the major asset classification level. If this is treated as a round-off error, this is a problem.

• Genomics & Informatics
• /
• 제19권4호
• /
• pp.42.1-42.17
• /
• 2021

Salivary gland carcinoma (SGC) is rare cancer, constituting 6% of neoplasms in the head and neck area. The most responsible genes and pathways involved in the pathology of this disorder have not been fully understood. We aimed to identify differentially expressed genes (DEGs), the most critical hub genes, transcription factors, signaling pathways, and biological processes (BPs) associated with the pathogenesis of primary SGC. The mRNA dataset GSE153283 in the Gene Expression Omnibus database was re-analyzed for determining DEGs in cancer tissue of patients with primary SGC compared to the adjacent normal tissue (adjusted p-value < 0.001; |Log2 fold change| > 1). A protein interaction map (PIM) was built, and the main modules within the network were identified and focused on the different pathways and BP analyses. The hub genes of PIM were discovered, and their associated gene regulatory network was built to determine the master regulators involved in the pathogenesis of primary SGC. A total of 137 genes were found to be differentially expressed in primary SGC. The most significant pathways and BPs that were deregulated in the primary disease condition were associated with the cell cycle and fibroblast proliferation procedures. TP53, EGF, FN1, NOTCH1, EZH2, COL1A1, SPP1, CDKN2A, WNT5A, PDGFRB, CCNB1, and H2AFX were demonstrated to be the most critical genes linked with the primary SGC. SPIB, FOXM1, and POLR2A significantly regulate all the hub genes. This study illustrated several hub genes and their master regulators that might be appropriate targets for the therapeutic aims of primary SGC.

• 공업화학
• /
• 제29권6호
• /
• pp.759-764
• /
• 2018

내재적 미세 다공성 고분자(polymer of intrinsic microporosity, PIM-1)를 사용하여 빈용매 유도 상전이법으로부터 3차원 다공성 구조를 가지는 필름을 형성하고, 이를 탄화하여 3차원 다공성 탄소(cNPIM)를 제조하였다. 전자주사현미경 분석을 통해 상전이 공정을 적용한 탄소소재가 마이크로, 메조, 매크로 기공을 모두 가지면서 서로 연결된 계층적 3차원 다공구조를 나타냄을 확인하였다. 특히 상전이 공정의 용매의 함량비를 조절함으로써 기공구조를 제어할 수 있었으며, 결과적으로 평균 0.75 nm의 기공 크기와 $2101.1m^2/g$의 높은 비표면적을 가지면서 약 30%의 메조, 마크로 기공구조를 겸비한 최적화된 다공성 탄소 전극을 제조할 수 있었다. 제조된 3차원 다공성 탄소소재를 전기이중층 캐퍼시터용 전극물질로 사용하여 수계전해질에서 측정한 결과, 높은 비표면적을 가지는 탄소 소재 내의 비약적 이온 이동속도 향상 효과로 높은 비축전용량(304.8 F/g@10 mV/s)과 우수한 충 방전 속도(77% 용량유지율@100 mV/s)를 나타내었다.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.40-47
• /
• 1998

This paper presents the physiological signal processing CMOS one chip for transmitting human bodys small electrical signals such as electrocardiogram(EKG) or electromyogram(EMG) and the external system for receiving signals was implemented by the commercial ICs. For simultaneous four-subject four-channel telemetry, a new enfored synchronization techniqeu using infrared bi-directional communication has been proposed. The telemeter IC with the size of 5.1*5.1mm$^{2}$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject-selection signal, time multiplexing of 4-channel modulated physiological signals, transmitting of telemetry signal to external system and auto power down control. The newly designed synchronized oscillator with low supply voltage dependence in the telemeter IC operates at a supply voltage from 4.6~6.0V and the nonlinearity error of PIM modulator was less than 1.2%F.S(full scale). The power saving block operates at the period of 2.5ms even if the telemetry IC does not receive command signal from external system for a constant time.