• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.17-18
• /
• 2003

Swelling behaviors of Lyocell and Polynosic fibers are investigated by measuring fiber sizes in ferric sodium tartrate complex (FeTNa) and NaOH solution. They showed an anisotropic swelling behavior, i.e., a large expansion in a radius and small shrinking in a longitudinal direction. Birefringent structure was maintained in Lyocell fibers in the swollen state but not in Polynosic fibers for both solvent systems.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.66-73
• /
• 2016

Lyocell fibers were used as a precursor in order to improve yield and strength of cellulose-based precursor while manufacturing activated carbon fiber(ACF). Lyocell fibers as a precursor for the preparation of ACF were surface-modified by reaction with 3-aminopropyltriethoxysilane(APTES) and pre-treated with KOH and H3PO4. Using aforementioned precursor, ACFs were prepared by a series of stabilization, carbonization and activation process at high temperatures. On each process, FT-IR, TGA, UTM and SEM were used to observe fibers' physical properties including structure and porous surfaces. FT-IR results proved that surface modification was achieved during stabilization, carbonization and activation process. TGA results during carbonization process found that surface modified fibers with APTES 0.02 mol(A2) showed higher thermostability, and extended pre-treatment increased yield. Especially, yield was found to have an increase of 10~20 wt% with surface modification during activation process. UTM results showed that tensile strength has the same order of concentration of APTES after surface modification, however, was found to show lower tensile strength than lyocell fibers after stabilization process. SEM results revealed that more homogeneous porosity control could be proceed after modifying the surface for the effective removal of hazardous substances.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.3_4 s.141
• /
• pp.470-477
• /
• 2005

This study was carried out to evaluate the biodegradability of viscose rayon and lyocell fibers, employing soil burial test, activated sludge test and enzymatic hydrolysis. Using X-ray analysis, crystallinity and morphology change was investigated. External changes after degradation were also observed by SEM and digital photographs. Vscose rayon fibers exhibited higher biodegadation than lyocell fibers, indicating that lower crystallinity favored the biodegradation. Among the biodegradability of lyocell fibers there was a tendency that fibers with lower crystallinity and higher moisture regain had higher values. When external changes after degradation being observed, it was shown that there were microorganisms growing on the surfaces of samples accompanying lading and weakening. From these results it was concluded that biodegradability of the specimens was most closely correlated to the moisture regain and crystallinity of fibers which reflects hydrophilicity and internal structure.

• Fashion & Textile Research Journal
• /
• v.1 no.1
• /
• pp.56-61
• /
• 1999

Swelling and fibrillation of two kinds of lyocell, $Tencel^{(R)}$ and $Lyocell^{(R)}$, were investigated using polarizing and scanning electron microscope (SEM). $Tencel^{(R)}$ of a representative lyocell showed that loop tenacity which is related to wrinkle and resilience of fiber does not show significant reduction in wet state. Two kinds of lyocell exhibited surprising degree of swelling in aqueous NaOH solution under free tension. Diameters of $Tencel^{(R)}$ and $Lyocell^{(R)}$ swelled up to 670% and 830%, respectively in the range of around 10% NaOH concentration. Molecular orientation estimated by birefringence also reduced remarkably in alkaline solution. Moreover, diameter and birefringence which changed in alkaline solution did not recovered to original level even after washing and drying. Fibrillation of $Lyocell^{(R)}$ fiber observed by SEM seems to be easier than that of $Tencel^{(R)}$. In order to understand the difference between $Tencel^{(R)}$ and $LyoceJl^{(R)}$, further study on the structure of the two fibers will be followed.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.436-441
• /
• 2007

In this work, the multiwalled carbon nanotubes(MWNTs) were functionalized with sodium dodecylbenzene sulfonate(SDBS) and then MWNTs/Lyocell composite fibers were prepared. The properties of MWNTs, the functionlization on the surface of MWNTs and their dispersion in the cellulose matrix were characterized by TEM, SEM, WAXD and FT-IR. The results showed that SDBS has been coated successfully onto the surface of the MWNTs by functionlization. This can improve effectively the dispersion uniformity of MWNTs in NMMO aqueous solution and is helpful to prepare a spinnable spinning dope. Moreover, the resultant MWNTs/Lyocell composite fibers still have cellulose II crystal structure, and their tensile strength and initial modulus increased with the increasing draw ratio and reached the optimal value with adding 1 wt% MWNTs. The thermal stability of the composite fiber was also improved by the addition of the MWNTs.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.168-174
• /
• 2010

In this research, an effective method for reducing the fibrillation of lyocell fibers, which are spun from a solution of cellulose in N-methyl morpholine-N-oxide(NMMO), through consecutive chemical treatments. Undried solution-spun cellulosic fiber was firstly treated with 10 to 30 wt% of multifunctional crosslinking agents, such as ethylene glycol poly(3-chloro-2-hydroxypropyl) ether, and then dipped into alkaline solution to introduce epoxy functions. Finally steam condition was applied to occur a chemical crosslinking in order to reduce the fibrillation on the surface of fibers. Fibrillation was also reduced significantly by adding extra $Na_2SO_4$ in NaOH solution. In addition, Antifibrilllated lyocell fibers show the slightly higher dyeability(4 %) to Cibacron Blue without serious reduction of mechanical properties.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.

• Carbon letters
• /
• v.17 no.1
• /
• pp.74-78
• /
• 2016

• Fashion Information and Technology
• /
• v.7
• /
• pp.2-9
• /
• 2010

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.33-34
• /
• 2003

Lyocell yarns were treated with NaOH, liquid ammonia, high pressure steam and polycarboxylic acids, and dyed with five reactive dyes. The water content of the samples was also measured by the centrifugal and chromatographic techniques. The total pore volume w as substantially increased by NaOH treatment, while decreased by high pressure steaming. The pore size distributions for the dyed samples were affected by the dyes used.