• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.55-62
• /
• 2011

In this paper, a temporal color and luminance variation suppression algorithm for a digital video sequence is proposed by considering time-varying light source. When a video sequence is sampled with the periodically emitting illuminant and with a short exposure time, the color rolling phenomenon occurs, where the color and the luminance of the image periodically change from field to field. In conventional signal processing techniques, the luminance variation remaining in the resultant video sequence degrades the constancy of the image sequence. In the proposed method, we obtain video sequences with constant luminance and color by compensating for the inter-field luminance variation. Based on a motion detection technique, the amount of the luminance variation for each channel is estimated on the background of the sequence without the effects of moving objects. The experimental results clearly show that our strategy efficiently estimated the illuminant change without being affected by moving objects, and the variations were efficiently reduced.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.269-278
• /
• 2007

Nighttime construction is being adopted by many state DOT's as a way to mitigate the impact of construction operations on the traveling public. Although a number of states have developed standard specifications for nighttime lighting, these standards are usually in the form of generic requirement statements that only specify minimum illuminance levels. The lighting standards do not include specific ways to achieve this illuminance level such as lighting arrangements and configurations for various work zone plans and construction operations. This leaves confusion between the traffic engineers and the contractors and does not guarantee consistency in those plans, thus affecting productivity and safety (lighting conditions account for 18% to 28% of work zone accidents). The main objective of this study is to utilize three dimensional animation and lighting analysis software to study and model lighting conditions of a construction site. This is expected to increase the safety and productivity of construction operations by achieving consistency in work zone lighting schemes. A computerized model was developed, called Nitelite. Various lighting schemes can be studied using the software to provide for typical applications including lighting fixture's locations, luminance, mounting height, tilt angle, and fixture type. The results from the developed software tool were validated through comparisons with previous research conducted using field measurements.

• KIISE Transactions on Computing Practices
• /
• v.22 no.10
• /
• pp.532-536
• /
• 2016

Frame Rate Up Conversion (FRUC) generate interpolated frames between existing frames using motion estimation and motion compensation interpolation considering temporal redundancy. Falsely-estimated FRUC, however, can generate poor quality frames because FRUC typically uses blending-based interpolation method. As skipping an interpolating process between frames generate mis-estimated motion vectors, could improve Quality of Services of FRUC. In this Paper we analyze luminance histogram and motion vector consistency in frames generating poor quality interpolated frames. We conclude these features could help to be a clue in classifying the frames, which often result in the poor quality of FRUC results through the analysis and experiment.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.77-82
• /
• 2006

The image display is an Important component of PACS and of medical digital imaging chain. Displayed image qualify is affected by the physical characteristics of display device, appropriate clinical settings and calibrations, and ambient lighting conditions. The performance of display systems is continuously degraded over time due to luminance deterioration and changes of clinical setting parameters. A routine QC is recommended because the performance of display systems is continuously degraded over time. Ten flat panel monochrome LCD display devices were included in the evaluation of the QC effect. The effect of QC on primary class LCD medical display devices for selected QC tests was evaluated by comparing the performances, luminance response, luminance dependencies, display resolution and display chromaticity in this study, of before and after the calibration procedures. The effects of the QC are significant to luminance response and luminance spatial dependencies test and the other side, are slight to the display resolution and display chromaticity test. A routine QC of display device is essential for the consistency of medical image display and presentation. The study of the QC effects of display devices will play an important role in practical QC procedures of display devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.928-937
• /
• 2013

This paper presents a novel contrast enhancement method based on singular value decomposition and image pyramid. The proposed method consists mainly of four steps. The proposed algorithm firstly decomposes image into band-pass images, including basis image and detail images, to improve both the global contrast and the local detail. In the global contrast process, singular value decomposition is used for contrast enhancement; the local detail scheme uses weighting factors. In the final image composition process, the proposed algorithm combines color and luminance components in order to preserve the color consistency. Experimental results show that the proposed algorithm improves contrast performance and enhances detail compared to conventional methods.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.316-323
• /
• 2003

Zinc complexes with bis[2-(o-hydroxyphenyl) naphtol [1,2] oxazolato ligands (ZnPBO-4) and its derivatives (ZnPBO-S) were synthesized, and luminescent properties of these materials were investigated. Both the fluorescent emission band and electroluminescent emission band were discussed based on their ligand structure differences. The emission band found that it strongly depends on the molecular structure of introduced ligand. It was tuned from 446 nm to 491 nm by changing the ligand structures. Spreading of the ${\pi}$-conjugation in 2-(o-hydroxyphenyl) group gives rise to a blue shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 3,100 $cd/m^2$ at 12V, current density, 575 $mA/m^2$ was obtained from the organic light-emitting diodes (OLEDs) using ZnPBO-4 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.292-297
• /
• 2001

Zinc complexes with Bis[2-(o-hydroxyphenyl) benzothiazolato ligands (ZnPBS-0) and Bis[2- (o-hydroxynaphthyl) benzothiazolato ligands (ZnPBS-05) were synthesized, and luminescent properties of these materials were investigated. The emission band found that it strongly depends on the molecular structure of introduced ligand and was tuned from 525 nm to 535 nm by changing the ligand structures. Spreading of the ${\pi}-conjugation$ in 2-(o-hydroxyphenyl) group gives rise to a blue shift. On the other hand, spreading of the ${\pi}-conjugation$ in benzothiazole groups leads to a red shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 8300 $cd/m^{2}$ at 11V was obtained from the organic light - emitting diodes (OLEDs) using ZnPBS-0 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.