• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.107-113
• /
• 2008

본 실험은 구동 온도와 방전관의 길이에 따라 변화하는 ICP 광원의 전기 광학적 특성에 대해서 알아보았다. 광원의 전기 광학적 특성이 정상상태에 놓이는 구동 조건을 확인하기 위하여 시간에 따른 전력 소모와 광속의 변화를 측정하였다. 전력소모와 광속의 시간에 따른 변화를 측정한 결과를 통해서 볼 때 최초구동에서 70분이 경과한 이후부터 전력소모는 초기값에 대해 1.45[%], 광속은 0.36[%]의 안정성을 나타냈다. 항온챔버 내에서 온도를 5구간으로 나뉘어 변화하면서 구동 온도에 따른 ICP 광원의 광학적 특성을 알아보았다. 휘도는 온도의 상승과 비례적으로 증가하였으나 $46.7[^{\circ}C]$ 이상에서는 오히려 감소하는 결과를 얻을 수 있었다. 파센법칙과 함께 보일-샤를의 법칙을 통해 0.02[Torr]의 압력이 변화함에 따라 더 높은 방전전압이 요구되지만 충분한 전압이 안정기에서 공급되지 못하기 때문이라 판단된다. 이와 더불어 방전관 길이에 따라 광원에 인가되는 전력과 전류을 측정하였다.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1619-1625
• /
• 2007

The gas mixture ratio of PDP discharges plays a very important role in the discharge characteristics of a plasma display panel. The increase of Xe contents results in the increases of luminance and luminous efficiency while it also results in the increase of the breakdown voltage. The addition of He gas increases the brightness and the luminous efficiency. Especially, the luminance and the luminous efficiency have a maximum value when the partial pressure of He is about 10% of the total pressure for a standard plasma display panel with Xe fraction of $10\sim30%$.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.586-590
• /
• 2009

Recently, an AC Plasma Display Panels(PDP) with the metal sustain electrodes have been reported in order to reduce the manufacturing cost of the AC PDP. However, the luminance and efficacy of the AC PDP with metal electrodes are worse than those of the AC PDP with ITO electrodes. In this paper, various ${\prod}$type metal electrodes are suggested, in order to improve the electro-optical characteristics of the AC PDP with metal electrodes. Among the suggested electrode types, luminance of Hump electrode structure is higher by $40\;cd/m^2$ and discharge current of Asymmetry electrode structure is lower by 5% than those of Pi electrode structure, respectively. Moreover, $T_1$ of Hump electrode structure is reduced to 10% as compared with Pi electrode structure in address period for ADS driving scheme. In all aspects, the characteristics of Hump and Asymmetry electrode structure show best performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.171-174
• /
• 2000

This study uses neon and xenon gas mixture discharges to determine the effects of the neon plasma emission on the characteristics of visible emission from the stimulation of the red, green, blue(RGB) phosphor layers in a surface-type alternate current plasma display panel(AC PDP). With a mixture of less than 2% xenon to neon, it is found that the luminance changes in the visible emission of the phosphor layers are similar to those of the neon plasma emission. In the range of xenon mix ratio from 2 to 5%, the luminance of the red, green, blue(RGB) phosphor layers decreases with a decrease in the neon plasma emission intensity. However, with a mixture of above 5% xenon to neon, the luminance of the red, green, blue(RGB) phosphor layers increases regardless of a decrease in the neon plasma emission intensity. Furthermore, the color purity of the red, green, blue(RGB) phosphor layers improve as the neon plasma emission intensity decreases. Accordingly, it is concluded that the optical properties of the phosphor layers, including color purity and luminance, depend on the neon plasma discharge emission as well as the visible emission from the stimulation of the phosphor layers.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.190-196
• /
• 2001

We measured 3-dimensional images of the light emitted from plasma display panel(PDP) by using newly proposed scanned point detecting method(SPDM). The SPDM has the point detector with pinhole. The light emitted from PDP cell at the in-focus position can pass through the pinhole and be collected by detector. On the contrary, the light emitted from PDP cell at the out-of-focus positions is focused on the front of or the behind of the pinhole. We could analyze the characteristic of 3-dimensional light emission distribution by SPDM. From 3-dimensional measurement of 828[nm], the efficient design of PDP cell, the importance of opening ration, and the relations between BUS electrode position and discharge intensity are obtained. Also, the relationship between discharge characteristics and sustain electrode structures in AC-PDP are studied by measuring luminance, current, and discharge voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.11-14
• /
• 2004

In this paper we report on development of our original mercury-less fluorescent lamps for general lighting. These new-type lamps have multi-pairs of electrodes to maintain multi-discharge paths and to keep positive column diffused state. The omission characteristics oft the lamps were investigated. These discharge lamps were operated by pulsed discharge. By using multi-pairs of electrodes for xenon pulsed discharge fluorescent lamps, higher intensity of luminance was obtained than the conventional type of lamps using single pair of electrodes. Recently this type of lamp achieved over $9000\;cd/m^2$ and 50 lm/W.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.732-735
• /
• 2009

In this paper, high Xe(Ne+Xe 10%, 20%, 30%) AC-PDP's discharge characteristics according to aging time were studied. The static margin, Vt close curve, discharge time lag was measured for experiments. According to increase of Xe partial pressure, the static margin and luminance was increased. As the result of analysis for misfiring probability, the misfiring is frequently occurred in accordance with increasing of aging time. To improve misfiring, we proposed 3Reset waveform and achieved misfiring probability which was improved.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권5호
• /
• pp.239-244
• /
• 2006

To drive the high-image quality plasma displays of XGA and/or full-HD, we must effectively improve the driving waveform, which get the reset period for the stabilized control of wall charges, the address period to select discharge or non-discharge, and sustain period for luminance in 1 TV-frame, and also the display quality. To accomplish them, the development of the technology for the fast address discharge is required. In this paper, the correlation between the sustain-electrode gap and address discharge characteristics for the high-speed addressing was analyzed using the measurements of dynamic voltage margins. Results showed that the narrower the gap between the sustain electrodes, the narrower the with of the scan pulse became and a dynamic margin of data voltage of 29.2 V was obtained at scan pulse width of $1.0{\mu}s\;and\;V_{ramp}$ of 240 V for driving 4-inch test penal, which the gap between sustain electrodes was $65{\mu}m$.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.67-75
• /
• 1992

A new method of driving the PDP(Plasma Display Panel) was proposed and its characteristics were investigated. Applying high frequency non-discharge pulses to an auxiliary anode resulted an increased region of stable operation, decreased delay time and increased light intensity. It is suggested that PDP with DPM (Double Pulse Memory) drive technique improves the delay time, luminance, region of stable operation and luminous efficacy compared to PDP with PPM(Planar Pulse Memory) drive technique developed by NHK Lab. in Japan.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2016-2018
• /
• 1999

Until now, there is no report for the relationship between the condition of addressing and the characteristics of surface discharge in ac- PDP. We have known that such experiments were important to drive a-PDP. Therefore, This paper deals with the probability of transfer and the characteristics of luminance according to addressing voltage (Va), blocking voltage (Vg)in addressing period and sustain voltage(Vs)in sustaining period and we use waveform according to ADS (Address and Display period Separation) method.