• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.45-65
• /
• 2018

Over the last three decades, Performance-based Earthquake Engineering (PBEE) has been mainly developed for high seismicity regions. Although information is abundant for PBEE throughout the world, the application of PBEE to lower-seismicity regions, such as those where the magnitude of the maximum considered earthquake (MCE) is less than 6.5, is not always straightforward because some portions of PBEE may not be appropriate for such regions due to geological differences between high- and low-seismicity regions. This paper presents a brief review of state-of-art PBEE methodologies and introduces the seismic hazard of lower-seismicity regions, including those of the Korean Peninsula, with their unique characteristics. With this seismic hazard, representative low-rise RC MRF structures and high-rise RC wall residential structures are evaluated using PBEE. Also, the range of the forces and deformations of the representative building structures under the design earthquake (DE) and the MCE of South Korea are presented. These reviews are used to propose some ideas to improve the practice of state-of-art PBEE in lower-seismicity regions.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.53-63
• /
• 2007

Seismic design codes are developed mainly based on the observation of the behavior of structures in the high seismicity regions where structures may experience significant amount of inelastic deformations and major earthquakes may result in structural damages in a vast area. Therefore, seismic loads are reduced in current design codes for building structures using response modification factors which depend on the ductility capacity and overstrength of a structural system. However, structures in low seismicity regions, subjected to a minor earthquake, will behave almost elastically because of the larger overstrength of structures in low seismicity regions such as Korea. Structures in low seismicity regions may have longer periods since they are designed to smaller seismic loads and main target of design will be minor or moderate earthquakes occurring nearby. Ground accelerations recorded at stations near the epicenter may have somewhat different response spectra from those of distant station records. Therefore, it is necessary to verify if the seismic design methods based on high seismicity would he applicable to low seismicity regions. In this study, the adequacy of design spectra, period estimation and response modification factors are discussed for the seismic design in low seismicity regions. The response modification factors are verified based on the ductility and overstrength of building structures estimated from the farce-displacement relationship. For the same response modification factor, the ductility demand in low seismicity regions may be smaller than that of high seismicity regions because the overstrength of structures may be larger in low seismicity regions. The ductility demands in example structures designed to UBC97 for high, moderate and low seismicity regions were compared. Demands of plastic rotation in connections were much lower in low seismicity regions compared to those of high seismicity regions when the structures are designed with the same response modification factor. Therefore, in low seismicity regions, it would be not required to use connection details with large ductility capacity even for structures designed with a large response modification factor.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.29-44
• /
• 2018

A ground-motion prediction equation (GMPE) for the Korean Peninsula, especially for South Korea, is developed based on synthetic ground motions generated using a ground motion model derived from instrumental records from 11 recent earthquakes of $M_L$>4.5 in Korea, including the Gyeongju earthquake of Sept. 12. 2016 ($M_L$5.8). PSAs of one standard deviation from the developed GMPE with $M_W$ 6.5 at hypocentral distances of 15 km and 25 km are compared to the design spectrum (soil condition, $S_B$) of the Korean Building Code 2016 (KBC), indicating that: (1) PSAs at short periods around 0.2 sec can be 1.5 times larger than the corresponding KBC PSA, and (2) SD's at periods longer than 2 sec do not exceed 8 cm. Although this comparison of the design spectrum with those of the GMPE developed herein intends to identify the characteristics of the scenario earthquake in a lower-seismicity region such as South Korea, it does not mean that the current design spectrum should be modified accordingly. To develop a design spectrum compatible with the Korean Peninsula, more systematic research using probabilistic seismic hazard analysis is necessary in the future.

• 지구물리와물리탐사
• /
• 제13권3호
• /
• pp.256-267
• /
• 2010

한반도의 지진들은 주로 중생대에 반도에서 발생한 격렬한 지각변동으로 생성된 단층 및 깨어진 주요 지질구조의 경계에서 발생한다. 이 지진들은 Eurasian plate와 충돌하는 인접한 Indian plate와 Pacific plate 및 Philippine plate에 의한 E-W 내지 ENE-SSW 방향의 압축력장에서 반도 내의 주로 NNE-SSW 방향의 활성단층들이 깨어지며 발생하며 주향성분이 우세한 역단층의 메커니즘을 갖는다. 한반도의 지진활동은 지난 20세기 동안 15~18세기의 이례적으로 높은 기간을 제외하고는 비교적 낮거나 중간수준이며 이는 판내부 지진활동의 전형적인 불규칙한 양상을 보여준다. 한반도의 지각구조는 상부지각과 하부지각을 뚜렷하게 구분하는 Conrad 면이 없는 대체로 균질한 지각이며 수평적 불균질성은 존재한다. 지각의 평균 두께는 33 km 정도이며 Airy 형의 지각균형을 이루고 있어 산악지방이 평야지역에 비하여 지각의 두께가 더 크다. P파의 속도는 지표 부근에서 Moho 면까지 점진적으로 증가하며 평균은 대략 6.3 km/sec이다. 상부맨틀의 P파(Pn)의 속도는 대략 7.8 km/sec이다.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.435-448
• /
• 2018

In order to make reliable earthquake-resistant design of civil engineering structures, one of the most important considerations in a region with high seismicity is to pay attention to the local soil condition of regions. It is aimed in the current study at specifying dynamic soil characteristics of Kirikkale city center conducting the 1-D equivalent linear and non-linear site response analyses. Due to high vulnerability and seismicity of the city center of Kirikkale surrounded by active many faults, such as the North Anatolian Fault (NAF), the city of Kirikkale is classified as highly earthquake-prone city. The first effort to determine critical site response parameter is to perform the seismic hazard analyses of the region through the earthquake record catalogues. The moment magnitude of the city center is obtained as $M_w=7.0$ according to the recorded probability of exceedance of 10% in the last 50 years. Using the data from site tests, the 1-D equivalent linear (EL) and nonlinear site response analyses (NL) are performed with respect to the shear modulus reduction and damping ratio models proposed in literature. The important engineering parameters of the amplification ratio, predominant site period, peak ground acceleration (PGA) and spectral acceleration values are predicted. Except for the periods between the period of T=0.2-1.0 s, the results from the NL are obtained to be similar to the EL results. Lower spectral acceleration values are estimated in the locations of the city where the higher amplification ratio is attained or vice-versa. Construction of high-rise buildings with modal periods higher than T=1.0 s are obtained to be suitable for the city of Kirikkale. The buildings at the city center are recommended to be assessed with street survey rapid structural evaluation methods so as to mitigate seismic damages. The obtained contour maps in this study are estimated to be effective for visually characterizing the city in terms of the considered parameters.

• 자원환경지질
• /
• 제33권1호
• /
• pp.61-75
• /
• 2000

Through modeling fault network using thin plate finite element technique in the San Andreas Fault system with slip rate over 1mm/year, as well as elevation, heat flow, earthquakes, geodetic data and crustal thickness, we compare the results with velocity boundary conditions of plate based on the NUVEL-1 plate model and the approximation of deformation in the Great Basin region. The frictional and dislocation creep constants of the crust are calculated to reproduce the observed variations in the maximum depth of seismicity which corresponds to the temperature ranging from $350^{\circ}C$ to $410^{\circ}C$. The rheologic constants are defined by the coefficient of friction on faults, and the apparent activation energy for creep in the lower crust. Two parameters above represent systematic variations in three experiments. The pattern of model indicates that the friction coefficient of major faults is 0.17~0.25. we test whether the weakness of faults is uniform or proportional to net slip. The geologic data show a good agreement when fault weakness is a trend of an additional 30% slip dependent weakening of the San Andreas. The results of study suggest that all weakening is slip dependent. The best models can be explained by the available data with RMS mismatch of as little as 3mm/year, so their predictions can be closely related with seismic hazard estimation, at least along faults where no data are available.

• 한국지진공학회논문집
• /
• 제13권4호
• /
• pp.1-13
• /
• 2009

느슨한 포화 사질토 층에 위치한 구조물은 지진 시 액상화로 인해 막대한 인적 경제적 피해가 발생하기 때문에 액상화 발생 가능 지반으로 분류된 지역은 구조물의 설계 및 운영 시 액상화 발생 가능성에 주의를 기울어야 한다. 한반도의 경우 중진 지역에 해당되고 역사 문헌의 발생 기록을 제외한 어떤 액상화 피해도 보고되지 않음에 따라 오랫동안 액상화에 대해서는 안전지대로 여겨져 왔다. 하지만, 최근 해외 지진 사례에 의하면 국내 서해안 지역 지반과 유사한 비소성 실트질 흙에서의 액상화 발생과 이로 인한 피해 사례가 종종 보고되고 있다. 본 연구에서는 국내에서의 액상화 가능성 평가 기법 합리화의 일환으로 서해안 두 부지를 대상으로 피에조콘 관입시험(CPTu)과 표준관입시험(SPT) 결과를 이용하여 액상화가능지수(LPI)를 산정하였다. LPI는 심도 20m까지의 액상화 가능성을 통합 적분하여 액상화로 인한 지표면 피해 발생 정도를 지수로 제시한다. 먼저 대상 현장에 대해 시나리오별 액상화 발생 가능성을 평가한 후, CPTu와 SPT로부터 산정된 LPI 값을 비교하였다. 액상화 저항 강도를 의미하는 진동저항응력비(CRR) 값에 의하면, CPTu로부터 구한 보정 콘 선단저항력 (qc1N)CS가 40에서 120 사이인 경우 또는 CRR이 0.23 이하인 경우에 SPT로부터의 산정된 값보다 작게 평가되었다. 또한 CRR 차이는 세립질 함유량이 큰 흙에서 두 방법 간의 차이가 더 크게 나타났다.