• 제목/요약/키워드: lower amine

검색결과 110건 처리시간 0.022초

Selection of indigenous starter culture for safety and its effect on reduction of biogenic amine content in Moo som

  • Tangwatcharin, Pussadee;Nithisantawakhup, Jiraroj;Sorapukdee, Supaluk
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권10호
    • /
    • pp.1580-1590
    • /
    • 2019
  • Objective: The aims of this study were to select one strain of Lactobacillus plantarum (L. plantarum) for a potential indigenous safe starter culture with low level antibiotic resistant and low biogenic amine production and evaluate its effect on biogenic amines reduction in Moo som. Methods: Three strains of indigenous L. plantarum starter culture (KL101, KL102, and KL103) were selected based on their safety including antibiotic resistance and decarboxylase activity, and fermentation property as compared with a commercial starter culture (L. plantarum TISIR543). Subsequently, the effect of the selected indigenous safe starter culture on biogenic amines formation during Moo som fermentation was studied. Results: KL102 and TISIR 543 were susceptible to penicillin G, tetracycline, chloramphenicol, erythromycin, gentamycin, streptomycin, vancomycin, ciprofloxacin and trimethoprim (MIC90 ranging from 0.25 to $4{\mu}g/mL$). All strains were negative amino acid-decarboxylase for lysis of biogenic amines in screening medium. For fermentation in Moo som broth, a relatively high maximum growth rate of KL102 and TISIR543 resulted in a generation time than in the other strains (p<0.05). These strain counts were constant during the end of fermentation. Similarly, KL102 or TISIR543 addition supported increases of lactic acid bacterial count and total acidity in Moo som fermentation. For biogenic amine reduction, tyramine, putrescine, histamine and spermine contents in Moo som decreased significantly by the addition KL102 during 1 d of fermentation (p<0.05). In final product, histamine, spermine and tryptamine contents in Moo som inoculated with KL102 were lower amount those with TISIR543 (p<0.05). Conclusion: KL102 was a suitable starter culture to reduce the biogenic amine formation in Moo som.

아민기 개질 탄소를 이용한 이산화탄소 분리 특성 (Characteristics of carbon dioxide separation using amine functionalized carbon)

  • 차왕석;임병준;김준수;이성연;박태준;장현태
    • 한국산학기술학회논문지
    • /
    • 제22권4호
    • /
    • pp.17-24
    • /
    • 2021
  • 새로운 이산화탄소 분리용 흡착제 개발은 흡착속도, 소수성, 상용 흡착제보다 낮은 재생온도 등을 고려하여야 한다. 본 연구에서는 CO2를 분리하기 위하여 아미노실란이 그라프팅된 활성탄을 합성하였다. 아민 작용기 전구체로 methyltrimethoxysilane(MTMS) and 3-Aminopropyl-triethoxysilane(APTES)을 사용하여 그라프팅하였다. APTES를 그라프팅 활성탄이 MTMS을 사용한 것보다 우수한 흡착 특성을 나타내었다. 온도 및 이산화탄소 분압에 따른 흡착 특성으로 이산화탄소 분리 메커니즘을 규명하였다. 이산화탄소의 흡수/흡착능은 25 ℃에서 아민 그라프팅 활성탄과 활성탄과 비슷하지만 아민 그라프팅 활성탄이 75 ℃에서 더 높게 나타났다. 아민 작용기 그라프팅 활성탄은 이산화탄소 분압이 1 % 인 조건에서 활성탄보다 더 우수한 흡수능을 나타내었다. 아미노실란 그라프팅 활성탄은 물리적 흡착 특성을 지닌 화학적 흡수 메카니즘을 나타내었다. 아민 작용기가 부여되어 개질된 고체상 흡수/흡착제는 이산화탄소 흡착/흡수 공정만 아닌 재료 관련 산업에 큰 영향을 미칠 수 있는 고성능 복합 재료이며, 개발된 흡착제는 흡수/흡착 및 분리 관련 산업 공정에 적용될 수 있다.

Interaction between Poly(L-lysine) and Poly(N-isopropyl acrylamide-co-acrylic acid) in Aqueous Solution

  • Sung, Yong-Kiel;Yoo, Mi-Kyong;Cho, Chong-Su
    • Macromolecular Research
    • /
    • 제8권1호
    • /
    • pp.26-33
    • /
    • 2000
  • A series of pH/temperature sensitive polymers were synthesized by copolymerizing N-isopro-pyl acrylamide(NIPAAm) and acrylic acid(AAc) . The influence of polyelectrolyte between poly(allyl amine) (PAA) and poly(L-lysine)(PLL) on the lower critical solution temperature(LCST) of pH/temperature sensitive polymer was compared in the range of pH 2∼12. The LCST of PNIPAAm/water in aqueous poly(NIPAAm-co-AAc) solution was determined by cloud point measurements. A polyelectrolyte complex was prepared by mixing poly(NIPAAm-co-AAc) with poly(allyl amine) (PAA) or poly(L-lysine) (PLL) solutions as anionic and cationic polyelectrolytes, respectively. The effect of polyelectrolyte complex formation on the conformation of PLL was studied as a function of temperature by means of circular dichroism(CD). The cloud points of PNIPAAm in the aqueous copolymers solutions were stongly affected by pH, the presence of polyelectrolyte solute, AAc content, and charge density. The polyelectrolyte complex was formed at neutral condition. The influence of more hydrophobic PLL as a polyelectrolyte on the cloud point of PNIPAAm in the aqueous copolymer solution was stronger than that of poly(allyl amine)(PAA). Although polymer-polymer complex was formed between poly(NIPAAm-co-AAc) and PLL, the conformational change of PLL did not occur due to steric hinderance of bulky N-isopropyl groups of PNIPAAm.

  • PDF

반응성 열가소성 수지로 개질된 TGDDM/DDS 시스템의 Cure Kinetics (Cure Kinetics of amine-cured tetraglycidyl-4,4'-diaminodiphenylmethane epoxy blends with a new polyetherimide)

  • 황승철;이정훈;김동현;김원호;김민영
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2004년도 춘계학술발표대회 논문집
    • /
    • pp.214-217
    • /
    • 2004
  • The cure kinetics of blends of epoxy(tetraglycidyl-4,4'-diaminodiphenylmethane ; TGDDM)/curing agent(diaminodiphenyl sulfone ; DDS) resin with amine terminated polyetherimide-CTBN-amine terminated polyetherimide triblock copolymer(ABA) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction parameters such as activation energy and reaction constants. By increasing the amount of ABA in the blends, the final cure conversion was decreased. Lower values of the final cure conversions in the epoxy/ABA blends indicated that ABA hinders the cure reaction between the epoxy and curing agents. 1be value of the reaction order, m, for the initial autocatlytic reaction was not affected by blending ABA with epoxy resin, and the value was approximately 1.0. The value of n for the nth order component in the autocatalytic analysis was increased by increasing the amount of ABA in the blends, and the value increased from 2.0-3.4. A diffusion controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/DDS/ABA blends.

  • PDF

적색어류의 biogenic amine 생성에 따른 저장온도의 영향 (Effect of Storage Conditions on Biogenic Amine Levels in Dark-Fleshed Fishes)

  • 조영제;손명진;김승미;박현규;여해경;심길보
    • 수산해양교육연구
    • /
    • 제20권1호
    • /
    • pp.135-145
    • /
    • 2008
  • Biogenic amines are naturally occurring anti-nutrition factors. They are causative agents in food poising episodes and act as catalysts to allergic reactions. The most commonly occurring biogenic amines in foods are: Histamine, tyramine, putrescine, cadaverine, tryptamine, ${\beta}$-phenylethylamine, spermine, spermidine and agmatine. The objective of this study was to identify changes and content levels of specific biogenic amines at selected storage temperatures $20{^{\circ}C}$, $4{^{\circ}C}$, and $-25{^{\circ}C}$, respectively. This study will focus on histamine, cadaverine, and putrescine concentrations in the following dark-fleshed fishes: Mackerel (Scomber japonicus), Horse Mackerel (Trachurus japonicus), Mackerel Pike (Cololabis saira), and Spanish Mackerel (Scomberomorus niphonius). Biogenic amines were determined using a method based on an extraction procedure described in the derivatisation and HPLC(High Performance Liquid Chromatography). The the recovery rate of individual amines was higher than those found in ion exchange chromatography. The results from the dark fleshed fish stability trial showed that high content of histamine (cadaverine and putrescine) were produced within a short period of time at $20{^{\circ}C}$. Fish stored at lower temperatures $4{^{\circ}C}$, showed lower content of biogenic amines. At $-25{^{\circ}C}$ the production of histamine, cadaverine and putrescine did not initiate until after day 100. All fish recorded the content of histamine below 1 mg/kg with the exception of the Horse Mackerel.

표면 개질된 나노복합막의 투과 특성 (Permeation Properties of Surface Modified Nanofiltration Membrane)

  • 탁태문;박형규;장경국
    • 멤브레인
    • /
    • 제14권3호
    • /
    • pp.207-217
    • /
    • 2004
  • 본 연구에서는 복합막의 제조공법으로 가장 광범위하게 쓰이는 계면중합법을 이용하여 나노복합막을 제조하였다. Monomer의 농도 및 조성, curing 조건, 후처리 조건과 같은 복합막 제조조건과, 운전압력, 공급액의 농도와 같은 운전인자에 의한 막성능 변화를 조사하였고, 계면중합 과정중에 첨가제를 사용하여 막의 유효면적을 확대하여 투과유속을 증가시키고자 하였다. Monomer의 농도가 증가함에 따라 배제능은 일정하였지만 투과유속이 감소하였고, curing 온도가 증가함에 따라서는 오히려 안정적인 박막층의 형성이 저해되어서 배제능과 투과유속이 모두 감소하였고, curing 시간에 따른 막성능의 변화는 나타나지 않았다. Test solution의 농도가 올라감에 따라서 투과유속과 배제능 모두 감소하였으며, 운전압력이 증가함에 따라서는 배제능과 투과유속 모두 향상하는 경향을 보였다. 계면중합과정중에 사용하는 아민단량체(amine monomer) 중 방향족 다이아민(aromatic amine)인 MPD의 함량을 높임에 따라서 배제능은 증가하였지만 투과유속은 현저하게 떨어졌다. 첨가제의 농도에 따른 표면 거칠기 증가 경향은 MPD가 포함된 amine 조성일 때가 더 높았지만 투과유속은 piperazine만 단독으로 사용하였을 때보다 떨어졌다.

DGEBA/선형 아민경화제의 주쇄에 포함된 질소 및 탄소원자 개수에 따른 물성 변화 연구 (Chemo-mechanical Analsis of Bifunctional Linear DGEBA/Linear Amine Resin Casting Systems)

  • 명인호;정인재;이재락
    • 폴리머
    • /
    • 제24권2호
    • /
    • pp.201-210
    • /
    • 2000
  • 에폭시 수지의 삼차원 망목상 구조 형성에 관한 근본적이고 화학구조에 바탕을 둔 미세구조 및 물성 발현에 대한 연구의 일환으로, 말단 관능기가 같은 아민 경화제의 주쇄에 포함된 질소 및 탄소원자의 개수가 반응특성, 열적 특성, 그리고 기계적 특성에 미치는 영향을 조사하였다. 열적 특성을 측정하기 위하여 DSC, TGA, TMA 분석을, 기계적 특성 및 파단특성 분석을 위하여 인장 시험, 삼점 굴곡시험, 광학현미경 분석을 행하였다. 그 결과, 주쇄의 사슬길이가 짧을수록 반응열이 크고 최대 발열온도와 열안정성이 낮아졌다. 또한 최대 반응전환율은 주쇄의 사슬길이가 길어질수록 증가하였다. 경화물의 경우 밀도는 주쇄의 사슬길이와는 큰 관계가 없으나, 인장탄성율은 주쇄의 사슬길이가 짧을수록 크고, 인장강도는 그와 반대의 경향을 보인다. 그 외의 shrinkage, 유리전이온도, 굴곡탄성율, 굴곡강도는 주쇄의 사슬길이와는 일견 무관한 불규칙한 형태를 보였다. 이는 최대 반응전환율의 차이가 이러한 특성에 큰 영향을 미치는 것을 나타낸다. 굴곡 파단특성은 최대 반응전환율과 밀접한 관계를 나타내었다.

  • PDF

폴리에스테르직물의 수산화나트륨 처리시 아민과 CTAB의 첨가효과 (An Addition Effect of Amine and Cethyl Trimethyl Ammonium Bromide on Alkali-treatment of Polyester)

  • 이정순;류효선
    • 한국의류학회지
    • /
    • 제16권3호
    • /
    • pp.335-344
    • /
    • 1992
  • This study was conducted to investigate the influence of addition of cetyl trimethyl ammo­nium bromide (CTAB), and amine [ethylamine (EA) or ethylene diamine (EDA)] to aqueous sodium hydroxide (NaOH) solution on polyester alkaline hydrolysis, The experimental vari­ables such as CTAB concentration, EA or EDA concentration, NaOH concentration, tempera­ture and time were compared, and the changes in physical and chemical properties of alkaline­hydrolyzed PET fabrics depending on their treated conditions were measured, The results are as follows: 1. By adding CTAB and amine in aqueous NaOH solution, increasing effect on weight loss of PET fabrics was obtained in simultaneous addition of CTAB and EDA, but not in CTAB and EA. 2. By adding CTAB & EDA simultaneously, increasing effect on weight loss was obtained regardless of EDA concentration, time and temperature, and it was more effective at lower NaOH concentration. :l. The increase of void space (or irregularly grooved surface), of softness, of wickability, of dyeability on PET fabric, and the decrease of tensile strength, of molecular weight were observed according to the weight loss on the PET fabrics. These changes were equal to all alkaline-hydrolyzed PET fabrics regardless of addition of CTAB and amine. l. There was little changes on crystallinity, thermal behavior when PET fiber was treated with ,aqueous NaOH solution with CTAB and EDA. These results supported that increasing effect on weight loss take place without inducing of fine structural change of PET fibers.

  • PDF

니트릴에 의해 개질된 가교구조 수지의 특성 (Characteristics of Crosslinked Resin Modified with Nitriles)

  • 심미자
    • 한국재료학회지
    • /
    • 제9권4호
    • /
    • pp.373-377
    • /
    • 1999
  • The cure mechanicsm and cure kinetics of diglycidyl ether of bisphenol A(DGEBA)/4,4'-methylene dianiline(MDA)/nitrile(MN, SN, GN) systems were studied by FT-IR and DSC to develop new applications in the biomedical polymer fields. The network structure of the DGEBA/MDA system was changed to the chain-extended network structure by the addition of nitriles. The reactions contributed to the chain extension were the primary amine-nitrile and hydroxyl-nitrile reactions. The chain-extended network structure could be indirectly proved by the decrement of T\ulcorner and the increment of impact strength with the increasing nitrile content. The cure rate of DGEBA/MDA/nitrile system was lower than that of DGEBA/MDA system due to the disturbance of nitrile group in the reaction of primary amine and epoxide groups.

  • PDF

Reaction of Drugs with Sodium Nitroprusside as a Source of Nitrosamines

  • Park, Jeen-Woo;Gary E. Means
    • Archives of Pharmacal Research
    • /
    • 제14권2호
    • /
    • pp.118-123
    • /
    • 1991
  • Potentially dangerous nitrosamines have been shown to result from the reaction of sodium nitrogusside with several drugs under physiological conditions (pH 7.3 and $37^\circ{C})$. In each case the products were identical to those produced upon reaction with nitrous acid at much lower pH values. Reaction rates were shown to reflect a first order dependence on both amine and nitroprusside concentrations and to increase at higher pH values, approximately in proportion to concentrations of unprotonated amine. Fast reactions of sodium nitroprusside with reduced glutathione, cysteine, and ascorbate suppress but do not prevent the conversion of amines into N-nitrosamines. These results show sodium nitroprusside to be very potent nitrosating agent under physiological conditions and suggested nitrosamines may be formed during its normal pharmacological administration.

  • PDF