• 자원환경지질
• /
• 제52권6호
• /
• pp.555-560
• /
• 2019

중국 지역 4개 지진에서 발생한 2~30초 범위의 레일리파를 이용하여 북한 지역의 1차원 전단파 속도구조를 구하였다. 레일리파는 남북한의 국경선 인근에 위치한 5개의 광대역 관측소(BRD, SNU, CHNB, YKB, KSA)에 양호하게 기록되었다. 다중필터분석를 이용하여 레일리파 기본모드 군속도가 계산되었고 이는 다시 위상부합필터를 적용하여 개선되었다. 2.9~3.2 km/s의 범위에 이르는 평균 분산곡선을 역산하여 전단파 속도를 구하였다. 지진원으로부터 BRD 관측소의 경로에서 추출된 4~6초 주기의 상대적으로 느린 군속도는 서해 서한만분지의 퇴적층군과 연관되었을 가능성이 있다. 14~20km의 상대적으로 깊은 지역 전단파 저속도층은 평남분지와 관련된 것으로 생각되며 낭림육괴와 평남분지에 분포하는 변성암 및 화강암체는 표면부터 14km 깊이의 빠른 전단파 속도와 일치한다.

• 지질공학
• /
• 제31권4호
• /
• pp.507-522
• /
• 2021

각 탐사의 반응 값은 지하 매질의 특정 물성에 따라 달라지기 때문에 한가지의 지구물리학적 방법만으로는 탐사목적을 달성하지 못하는 경우가 종종 있다. 특히 지질재해 위험에 취약한 지역을 조사하는 경우, 인명 및 재산피해를 최대한 줄이기 위해 한 가지 이상의 탐사방법을 사용하는 것이 효과적이다. 제방의 안전성 평가를 위한 이 연구에서는 각 탐사결과들을 개별적으로 해석하는 대신 탄성파속도(굴절법에 의한 P파속도와 MASW의 S파속도)와 전기비저항 값들을 통계적으로 분석하여 결정된 임계값들을 기반으로 취약구간과 안전구간 등으로 구분하는 사분면 상관기법을 수행하였다. 임계값은 수평 4층 구조와 경사진 파쇄대에 대한 모델자료를 가지고 수행한 사분면 상관기법을 테스트하는 과정에서 두 개의 속성자료 모두 평균에서 표준편차를 빼준 값으로 결정되었다. 전기비저항-P파속도의 교차출력에 비해 전기비저항과 S파속도를 이용한 교차출력 해석이 제방 시스템의 토양유형, 지반강성 및 암석학적 특성 정보를 보다 충실히 제공하였다. 낮은 S파속도와 높은 전기비저항으로 2사분면에 투영된 느슨한 모래 구역이 취약구간으로 평가되는데 이와 같은 해석은 시추공 표준관입시험에서 보인 중심코어의 N 값 분포로 뒷받침되었다.

• 한국대기환경학회지
• /
• 제12권2호
• /
• pp.131-139
• /
• 1996

The developent of ceramic combustor is being increased beca- use of the excellent physical properties of ceramic material, that is, high-resistant strength, high emissivity power and high corrosin-resistance. Ceramic combustor has been interested in the application of ultra-lean combustion for low NO$_{x}$ emission and gaseuos waste incineration with good combustion. This experimental study was conducted to investigate the combustion and emission characteristics of wall recess type ceramic combustor with equivalence ratio, mixture flow velocity and wall recess depth as parameters. The results in this study are as follows: 1. Wall recess played a important role to extend flame stability region. 2. The peak temperature of gas was peoportional to equivalence ratio, mixture flow velocity and wall recess depth. 3. The static pressure of mixing chamber and inlet temperature depended on the position of flame zone. 4. NO reduction was achieved by lean mixture without lower combustibility.y.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.148-155
• /
• 2005

In this study, Development of 300,000kcal/hr high velocity Injection burner with fuel multi-stage was performed using experiments. The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is largest access air combustion and the secondary flame is complete combustion zone, where most of fuel bums. Experiments were performed on an industrial scale in a laboratory furnace and Liquefied Natural Gas(LNG) was used as primary and secondary fuels. Comparison of outlet NOx and outlet Temperature under various air rate and primary/ secondary fuel ratio was performed. The test demonstrated that NOx emission con be reduced by 70% in accordance with operating conditions.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.1126-1135
• /
• 1996

This study was conducted to select the sensors for measuring temperature, relative humidity, and air velocity among the major environmental factors affecting the pig productivity as a part of the study for the optimum production system model development of pig-housing. The study results are summarized as the follows : Two sensors , HMP233L and HANI, were tested for measuring temperature and relative humidity , Test results were analyzed by the statistical methods. And the sensor, HMP233L was selected as a proper sensor for temperature sand relative humidity measurement . An air velocity sensor was tested. Test results showed that its accuracy was low and incongruent for the air velocity measurement when it was lower than 4m/s.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• 한국추진공학회지
• /
• 제4권4호
• /
• pp.78-86
• /
• 2000

Mach 1.8의 동축공기를 갖는 수소 난류 화산 화염의 특성을 이해하는 것이 본 연구의 목적이다. 화염길이와 연료유동의 자취에 대한 직접사진, Acetone PLIF, Mie scattering, 수치해석법을 이용하여 화염의 구조를 분석하였다. 연료의 유속를 고정시켰을 때, 공기의 유속 증가에 따른 변화를 측정하였다. 아음속 화염의 길이는 급격히 감소한 반면, 초음속 화염의 길이는 완만하게 증가하였다. 또한 연료 노즐 립의 두께 변화에 따른 화염의 소염 특성을 관찰하였다. 노즐 립의 두께에 따라 화염 안정성이 증가하였는데 이는 초음속 화염의 안정화를 위한 최소 두께 값이 존재함을 나타낸다. 유동장 구조를 분석한 결과, 연료 제트가 고압영역에 가로 막혀서 축방향 모멘텀을 잃고, 저산란 영역이 만들어지는 것을 확인하였다. 또한, 모멘텀을 잃은 연료가 재순환 영역을 따라 순환하면서 긴 체류시간을 갖기 때문에 예혼합 영역이 만들어 졌음이 밝혀졌다.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.19-24
• /
• 2008

The wind-power among the new and renewable energies uses the wind, a limitless, clean and pure energy which is available at any place. It requires low installation cost compared to the generation of other renewable energies, and is easy to operate, and furthermore, can be automated for operation. Korea has been taking a great deal of interest in the development of renewable energy generating equipment, specifically wind power generation as the nation has a nearly total reliance on imported petroleum. A measuring poll 30m high was installed at a location with an altitude of 142m above the sea level in order to measure and analyze the wind power potentiality at H University's Asan Campus, and the wind velocity and wind direction were measured for 1 year. As for the wind power resource of the area adjacent to Asan campus, the Weibull Distribution coefficient was C=2.68, K =1.29 at H30m. Weibull Distribution coefficient was modified on the basis of compensated wind velocity (=3.1m/s) at H 60m, and the energy density was $42W/m^2$. AEP 223,750 KWh was forecast based on the simulation of an 800KW grade wind turbine. It is considered that the wind power generation has to be studied further in the inland zone with low wind velocity to cope with the possible exhaustion of fossil fuel and ensure a sustainable environmental preservation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.19-24
• /
• 2021

The low normal zone propagation velocity (NZPV) of high-temperature superconducting (HTS) tape leads to a quench protection problem in HTS magnet applications. To overcome this limitation, various studies were conducted on HTS coils without turn-to-turn insulation (NI coils) that can achieve self-protection. On the other hand, NI coils have some disadvantages such as slow charging and discharging time. Previously, the HTS coils with turn-to-turn insulation (INS coils) were operated in power supply (PS) driven mode, which requires physical contact with the external PS at room-temperature, not in persistent current mode. When a quench occurs in INS coils, the low NZPV delays quench detection and protection, thereby damaging the coils. However, the rotary HTS flux pump supplies the DC voltage to the superconducting circuit with INS coils in a non-contact manner, which causes the INS coils to operate in a persistent current mode, while enabling quench protection. In this paper, a new protection characteristic of HTS coils is investigated with INS coils charging through the rotary HTS flux pump. To experimentally verify the quench protection characteristic of the INS coil, we investigated the current magnitude of the superconducting circuit through a quench, which was intentionally generated by thermal disturbances in the INS coil under charging or steady state. Our results confirmed the protection characteristic of INS coils using a rotary HTS flux pump.