• 미생물학회지
• /
• 제22권2호
• /
• pp.77-84
• /
• 1984

This examined some conditions for the induction of ${\beta}$-D-galactosidase synthesis in Candida kefyr CBS 834. The optimal pH, temperature, and inoculum size either for growth or${\beta}$-D-galactosidase synthesis were 5.5, $30^{\circ}C$ and above 0.2 at A610nm, respectively. Enzyme activity began to increase at 2h after the addition of inducer, and continued to increase linearly up to $2{\sim}3h$ before reaching stationary phase, and thereafter its activity was decreased. ${\beta}$-D-galactosidase was induced either by lactose or galactose but not either by glucose or ethanol. The greater activity of ${\beta}$-D-galactosidase on galactose than on lactose indicated that the former might be natural inducer for ${\beta}$-D-galactosidase synthesis. The rate of its induction as a function of lactose concentration showed that enzyme activity increased linearly above 4mM, while it was very low below that. Glucose represed the induction of ${\beta}$-D-galactosidase, and the period of adaptation to inducer from other carbon sources was relatively short.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.356-363
• /
• 2015

This study examined the effects of different day/night temperature regimes or silver ion on growth and flowering of passion fruit 'Tai-nung No.1'. Low temperature treatment ($20/15^{\circ}C$) caused passion fruit cultivar 'Tai-nung No.1' to fail to flower. Flowering induction occurred within a temperature range of $20-30^{\circ}C$, with no significant difference in the days to first flower bud and the total number of flower buds between plants grown at $30/25^{\circ}C$ and $25/20^{\circ}C$. However, plants grown at $30/25^{\circ}C$ exhibited their first flower buds set on the higher nodes and had higher abortion rates of flower buds than those at $25/20^{\circ}C$. Plants grown at $30/25^{\circ}C$ had the most rapid growth and the shortest plastochron. We also evaluated the effect of the ethylene response inhibitors silver nitrate ($AgNO_3$) and silver thiosulfate (STS) on growth and flowering of potted passion fruit 'Tai-nung No.1', when they were exposed to low temperature conditions ($20/15^{\circ}C$) following chemical treatments ($AgNO_3$ or STS, at 0.5 or 1.0 mM). $AgNO_3$ and STS treatments induced flower formation and initial flower bud formation within approximately two weeks at $20/15^{\circ}C$ whereas non-treated control plants exhibited no flower formation. ACC content and activity of ACC oxidase in the leaves of passion fruit 'Tai-nung No.1'exposed to low temperature conditions ($20/15^{\circ}C$) were significantly inhibited by the ethylene inhibitor treatments. These results indicate that ethylene, which is produced under low temperature conditions, plays an important role in inhibiting flower formation in passion fruit.

• 한국잠사곤충학회지
• /
• 11호
• /
• pp.63-68
• /
• 1970

가잠의 Virus다각체의 저온 및 고온처리에 대한 유발현상을 조사하기 위하여 5령기잠을 공시하고 저온(5$^{\circ}C$, 24hrs.), 고온(Hot water bath 에 4$0^{\circ}C$, 5min으로 침지 및 Oven 내에 4$0^{\circ}C$, 30min.으로 단독 및 복합처리하여 핵다각체병(N) 중장형 다각체병(C), 병발형(NC) 유발률을 조사하고 동시에 핵다각체병(N)과 중장형다각체병(C)대하여 Giemsa solution 염색법에 의한 염색성을 조사하였다. 1. 냉장(5$^{\circ}C$, 24 시간) 처리와 고온(Hot water bath, 4$0^{\circ}C$, 5분간) 처리를 한 핵복다각체병(N)은 중장형다각체병(C)보다 그 유발률이 적고 또 복합처리에 있어서도 중장형다각테병(C)의 유발율은 핵다각체병(N)보다 많다. 2. 냉장처리후 고온(4$0^{\circ}C$, 30분간 건열) 처리, 반대로 고온처리후 냉장처리한 Virus다각체의 유발률도 중장형다각체병(C) 보다 핵형다각예병(N)의 유발현상이 현저하게 많이 나타났다. 3. Giemsa solution 염색법에 의한 핵다각체병(N)의 다각체는 염색이 되지 않으나 중장형다각예병(C)의 다각체는 잘 염색되어 염색성에 의하여 구별할 수 있었다.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.46-54
• /
• 1993

$\beta$-SiC was chemically vapor deposited by pyrolysis of MTS＋H2 gas mixture. The experiments were conducted in the temperature range of 1100~150$0^{\circ}C$ with a r.f. induction furnace under atmospheric pressure. The IR, XRD, EDS and AES analysis revealed that the free Si was always codeposited with SiC below 140$0^{\circ}C$, regardless of the total flow rate and MTS concentration, whereas $\beta$-SiC single phase was deposited at 150$0^{\circ}C$. C3H8 or CH2Cl2 as an excess C sources, was supplied with MTS in order to obtain stoichiometric SiC at low temperature. With the addition of C3H8 or CH2Cl2, the deposition rate was increased and $\beta$-SiC single phase could be deposited even at temperature as low as 110$0^{\circ}C$. In the absence of C3H8 or CH2Cl2, the microhardness of the layer was quite low (

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.440-446
• /
• 2006

To investigate flowering related genes in winter-type oilseed rape (Brassica napus L. cv. Tammi), differentially expressed genes were isolated from leaves of the plant after low temperature treatment which is requirements for floral induction. As a result of suppression subtractive hybridization (SSH), 288 clones were randomly selected from SSH library. Using reverse Northern blot analysis, 150 of 288 clones were identified to be differentially expressed. Out of these 150 clones, 45 clones showed very high identities with the known genes. Four clones showed very high identities over 90% with metallothionein-like gene that is related to flowering-induced genes. Of these 4 clones, the cDNA clone, rfs-13, revealed high identity with meotallothionein-like protein in Arabidopsis thaliana (98%) and Brassica compestris (89%). Furthermore, gene expressed in immature flower stages was confirmed by Northern blot analysis.

• 한국환경과학회지
• /
• 제14권12호
• /
• pp.1093-1102
• /
• 2005

Effects of abscisic acid(ABA) and temperature on the anthocyanin accumulation and phenylalanine ammonia Iyase(PAL) activity were investigated in seedlings of Arabidopsis thaliana. In time course study, exogenous application of ABA $(50-1000\;{\mu}M)$ led to a noticeable increase in anthocyanin pigments which persisted over the following 5 days. Anthocyanins increased in concert with the chlorophyll loss. The activity of PAL, a key enzyme in the phenylpropanoid pathway, increased on exposure to ABA and reached maximum on the 4th day, This result shows that anthocyanin synthesis and PAL activity have a close physiological relationships. In the effects of temperatures ($10^{\circ}C,\;17^{\circ}C,\;25^{\circ}C$and $30^{\circ}C$) on anthocyanin accumulation and PAL activity in seedlings, a moderate-low temperatures ($17^{\circ}C$) enhanced both anthocyanin content and PAL activity, whereas elevated temperatures ($30^{\circ}C$) showed low levels of anthocyanin and PAL activity, suggesting a correlation between temperature-induced anthocyanin synthesis and the accumulation of PAL mRNA. Simultaneous application of ABA with temperatures Induced higher anthocyanin synthesis and PAL activity in seedlings than ABA or temperature stress alone. Moderate-low temperature with ABA exposure elicited the maximal induction of anthocyanin synthesis and PAL activity. Therefore, ABA treatment significantly increased thermotolerance in .A. thalinan seedlings. Ethephon and ABA showed similar mode of action in physiological effects on anthocyanin accumulation and PAL activity. Our data support that anthocyanins may be protective in preventing damage caused by environmental stresses and play an important role in the acquisition of freezing tolerance.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.600-607
• /
• 2002

The Ni-Zn synthetic ferrite were acquired from thermally decomposing the metal nitrates Fe(NO$_3$)$_3$.$9H_2$O, Zn($NO_3$)$_2$.$6H_2$O, Ni($NO_3$)$_2$. $6H_2$O, and Cu($NO_3$)$_2$. $3H_2$O at $150^{\circ}C$ for 24 hours and was calcined at $500^{\circ}C$. Each of those was pulverized for 3, 6, 9, and 12 hours in a steel ball mill and was sintered between $700^{\circ}C$ and $1,000^{\circ}C$ for 1 hour, and then their microstructures and electromagnetic properties were examined. We could make the initial specimens chemically bonded in liquid at the temperature as low as $150^{\circ}C$, by using the melting points less than $200^{\circ}C$ of the metal nitrates instead of the mechanical ball milling, then narrowed a distance between the particles into a molecular level, and thus lowed sintering temperature by at least $200^{\circ}C$ to$ 300^{\circ}C$. Their initial permeability was 50 to 400 and their saturation magnetic induction density and coercive force 2,400 G and 0.3 Oe to 0.5 Oe each, which were similar to those of Ni- Zn ferrite synthesized in the conventional process. In the graph of initial permeability vs frequencies, we could observe a $180^{\circ}C$rotation of the magnetic domain, which appears in a broad band of microwave near the resonance frequency.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.232-237
• /
• 2007

기본조성 $(Ni_{0.2}Cu_{0.2}Zn_{0.6})_{1+x}(Fe_2O_3)_{1-x}$에서 $Fe_2O_3$가 약간 부족한 비화학양론적인 조성비를 택하여 Ni-Zn-Cu 페라이트의 입계에 높은 저항층을 형성하고 소결을 촉진시켜 낮은 손실, 높은 투자율 및 자기유도 와 주성분을 치환해서 스피넬 격자를 고용시킬 목적으로 $TiO_2$ 및 $Li_2CO_3$를 소량 첨가하였다. 이들 원료들을 혼합한 후 가소 후 소결온도 $875^{\circ}C,\;900^{\circ}C,\;925^{\circ}C$ 및 $950^{\circ}C$에서 소결하였다. 각 시편들에 대한 소결밀도는 $4.85\sim5.32g/cm^3$으로 나타났고, 각 시편들의 고유저항은 $10^8\sim10^{12}\Omega-cm$으로 측정되었다. 시편들의 자기유도 특성 값은 대략 $800\sim1300G$ 부근이었으며, $TiO_2$를 첨가한 경우보다 $Li_2CO_3$를 첨가한 경우가 약간 높게 측정되었다. 각각 시편들의 보자력은 $2.5\sim4.5$ Oe로 연자성 재료의 범위로 나타났다. 초투자율 및 품질계수는 각각 $125\sim275$ 및 $65\sim83$으로 나타나 Ni-Zn-Cu 페라미트에서 측정되는 값들과 대동소이했다. 물리적인 특성값(고유저항, 자기유도, 초투자율, 품질계수 등)으로 미루어 보마 각종 고주파영역(microwave영역까지 포함) 통신기기 코어 및 편향 요크 코어 등으로 응용이 가능하다.

• 미생물학회지
• /
• 제29권2호
• /
• pp.80-84
• /
• 1991

We cloned and expressed hepatitis B viral core antigen (HBcAg) gene in E. coli using $P_{L}$ promoter system. For optimal expression of the gene, we undertook the studies on the effects of the distance between Shine-Dalgarno (SD) sequence and start codon, copy number of repressor gene, induction temperature, and the stability of the core antigen. The results demonstrated that the induction at 37.deg.C was more efficient than at 42.deg.C, and the 11 base pairs (bp) distance between SD sequence and start codon of HBcAg gene was more efficient than the 15 bp distance in E. coli. The copy number of cI857 repressor gene did not influence on the expression of HBcAg, and the expression level of HBcAg in mutant type (low protease activity) and wild type strains was almost the same. The produced core antigen appeared to be HBcAg not HBeAg judged by two different radioimmunoassat (RIA) kits. This result suggested that the antigen was stable in E. coli.i.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.198-201
• /
• 2004

Aluminum alloys have high potential for weight reduction in automotive and other applications. But aluminum alloys have relatively low tubular hydroformability which can be enhanced by conducting the hydroforming at elevated temperatures. Hot working processes are commonly used in bulk forming such as forging and rolling, but still is rare in sheet metal forming like hydroforming. In this study hydroforming test at elevated temperatures is performed by special designed induction heating system to investigate the hydroformability of aluminum alloys. The high temperature formability characteristrics are obtained by 1?fitting forming test and circular bulging test and the effects of the process parameters such as feeding amount, internal pressure and temperatures on the tubular forming limits are mainly investigated.