• Earthquakes and Structures
• /
• 제5권1호
• /
• pp.1-22
• /
• 2013

Soft storey failure mechanism is a common collapse mode for masonry-infilled (MI) reinforced concrete (RC) buildings subjected to severe earthquakes. Simple analytical equations correlating global with local ductility demands are derived from pushover (PO) analyses for seismic assessments of regular MI RC frames, considering the critical interstorey drift ratio, number of storeys and lateral loading configurations. The reliability of the equations is investigated using incremental dynamic analyses for MI RC frames of up to 7 storeys. Using the analytical ductility relationship and a coefficient-based method (CBM), the response spectral accelerations and period shift factors of low-rise MI RC frames are computed. The results are verified through published shake table test results. In general applications, the analytical ductility relationships thus derived can be used to bypass the onerous PO analysis while accurately predicting the local ductility demands for seismic assessment of regular MI RC frames.

• Structural Engineering and Mechanics
• /
• 제32권3호
• /
• pp.383-398
• /
• 2009

Applying nonlinear statistical analysis methods in estimating the performance of structures in earthquakes is strongly considered these days. This is due to the methods' simplicity, timely lower cost and reliable estimation in seismic responses in comparison with time-history nonlinear dynamic analysis. Among nonlinear methods, simplified to be incorporated in the future guidelines, Modal Pushover Analysis, known by the abbreviated name of MPA, simply models nonlinear behavior of structures; and presents a very proper estimation of nonlinear dynamic analysis using lateral load pattern appropriate to the mass. Mostly, two kinds of connecting joints, 'hinge' and 'rigid', are carried out in different type of steel structures. However, it should be highly considered that nominal hinge joints usually experience some percentages of fixity and nominal rigid connections do not employ totally rigid. Therefore, concerning the importance of these structures and the significant flexibility effect of connections on force distribution and elements deformation, these connections can be considered as semi-rigid with various percentages of fixity. Since it seems, the application and implementation of MPA method has not been studied on moment-resistant steel frames with semi rigid connections, this research focuses on this topic and issue. In this regard several rigid and semi-rigid steel bending frames with different percentages of fixity are selected. The structural design is performed based on weak beam and strong column. Followed by that, the MPA method is used as an approximated method and Nonlinear Response History Analysis (NL-RHA) as the exact one. Studying the performance of semi-rigid frames in height shows that MPA technique offers reasonably reliable results in these frames. The methods accuracy seems to decrease, when the number of stories increases and does decrease in correlation with the semi-rigidity percentages. This generally implies that the method can be used as a proper device in seismic estimation of different types of low and mid-rise buildings with semi-rigid connections.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.939-963
• /
• 2016

According to the new directives about the rational and efficient use of energy, thermal bridges in buildings have to be avoided, and the thermal insulation (TI) layer should run without interruptions all around the building - even under its foundations. The paper deals with the seismic response of multi-storeyed reinforced concrete (RC) frame building structures founded on an extruded polystyrene (XPS) layer placed beneath the foundation slab. The purpose of the paper is to elucidate the problem of buildings founded on a TI layer from the seismic resistance point of view, to assess the seismic behaviour of such buildings, and to search for the critical parameters which can affect the structural and XPS layer response. Nonlinear dynamic and static analyses were performed, and the seismic response of fixed-base (FB) and thermally insulated (TI) variants of nonlinear RC building models were compared. Soil-structure interaction was also taken into account for different types of soil. The results showed that the use of a TI layer beneath the foundation slab of a superstructure generally induces a higher peak response compared to that of a corresponding system without TI beneath the foundation slab. In the case of stiff structures located on firm soil, amplification of the response might be substantial and could result in exceedance of the superstructure's moment-rotation plastic hinge capacities or allowable lateral roof and interstorey drift displacements. In the case of heavier, slenderer, and higher buildings subjected to stronger seismic excitations, the overall response is governed by the rocking mode of oscillation, and as a consequence the compressive strength of the XPS could be insufficient. On the other hand, in the case of low-rise and light-weight buildings, the friction capacity between the layers of the applied TI foundation set might be exceeded so that sliding could occur.

• Earthquakes and Structures
• /
• 제20권2호
• /
• pp.215-224
• /
• 2021

The carbon dioxide present in the atmosphere is one of the main reasons for the corrosion of bridges, buildings, tunnels, and other reinforced concrete (RC) structures in most industrialized countries. With the growing use of fossil fuels in the world since the Industrial Revolution, the amount of carbon dioxide in urban and industrial areas of the world has grown significantly, which increases the chance of corrosion caused by carbonation. The process of corrosion leads to a change in mechanical properties of rebars and concrete, and consequently, detrimentally impacting load-bearing capacity and seismic behavior of RC structures. Neglecting this phenomenon can trigger misleading results in the form of underestimating the seismic performance metrics. Therefore, studying the carbonation corrosion influence on the seismic behavior of RC structures in urban and industrial areas is of great significance. In this study, a 2D modern RC moment frame is developed to study and assess the effect of carbonation corrosion, in 5-year intervals, for a 50 years lifetime under two different environmental conditions. This is achieved using the nonlinear static and incremental dynamic analysis (IDA) to evaluate the reinforcement corrosion effects. The reduction in the seismic capacity and performance of the reinforced concrete frame, as well as the collapse probability over the lifetime for different corrosion scenarios, is examined through the capacity curves obtained from nonlinear static analysis and the fragility curves obtained from IDA.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.35-57
• /
• 2022

This article presents a computationally efficient framework for multi-objective seismic design optimization of steel moment-resisting frame (MRF) structures based on the nonlinear dynamic analysis procedure. This framework employs the uniform damage distribution philosophy to minimize the weight (initial cost) of the structure at different levels of damage. The preliminary framework was recently proposed by the authors based on the single excitation and the nonlinear static (pushover) analysis procedure, in which the effects of record-to-record variability as well as higher-order vibration modes were neglected. The present study investigates the reliability of the previous framework by extending the proposed algorithm using the nonlinear dynamic design procedure (optimization under multiple ground motions). Three benchmark structures, including 4-, 8-, and 12-story steel MRFs, representing the behavior of low-, mid-, and high-rise buildings, are utilized to evaluate the proposed framework. The total weight of the structure and the maximum inter-story drift ratio (IDRmax) resulting from the average response of the structure to a set of seven ground motion records are considered as two conflicting objectives for the optimization problem and are simultaneously minimized. The results of this study indicate that the optimization under several ground motions leads to almost similar outcomes in terms of optimization objectives to those are obtained from optimization under pushover analysis. However, investigation of optimal designs under a suite of 22 earthquake records reveals that the damage distribution in buildings designed by the nonlinear dynamic-based procedure is closer to the uniform distribution (desired target during the optimization process) compared to those designed according to the pushover procedure.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 1994년도 학술발표대회논문집 상
• /
• pp.29-36
• /
• 1994

The purpose of this study is to suggest the basic design elements for dwelling environment planning of downtown in Taegu.The evaluation of the dwelling environment should be approached from the satisfaction and the cognitive of the residents, that are based on their desire and various values on the conditions of residential area. This paper concerns the satisfaction and the congnitive image structure of the residents in the various dwelling types, from which design elements for dwelling environments can be derived. The results are as folIows: 1) The analysis on the satisfaction of dwell ins environment shows lots of displeasure about the lack of open-spaces and the housing low-quality, neighborhood in Mun-hwa, Korean style housing and the low-rise apartment areas. In order to make the variety types of dowelling in downtown district, the improvement of housing qualities and the expantion of the urban facilities for the open-spaces and communities are need. 2) The design elements of dwelling environments in downtown find out the important planning elements for urban design. The evaluation of the cognitive image structures about the safety and affection should be considered in design for urban dwelling areas.

• 기술사
• /
• 제18권3호
• /
• pp.1-20
• /
• 1985

The traffic congestion of Seoul city has been one of the most serious problems to be settled since the advent of 1970s. As a means to mitigate traffic mess, the authority concerned launched the construction of subway line 3 and 4 in 1980. The two Subway lines slated for completion by 1985 cross each other and run north-south direction, passing through the metropolitan area of Seoul city fraught with high-rise edifices and large-scale shopping centers, and, in order to reduce blasting vibration, NATM was executed for a distance of 10 Km, instead of ASSM previously employed when subway line 1 and 2 were constructed. Tunnel blastings were implemented, preceded by classifying the rocks at construction area into five categories, namely, hard rock, semi-hard rock, weak rock weathered rock and silt and by calculating their respective specific charges through standard test blastings, by employing the pre-splitting and smooth blasting with drilling patterns of burn cut type, so as not to cause damages to surface structures. Most of explosives used were the slurry of low specific gravity and low velocity, and the firings executed by the use of milli-second detonators. Empiric formula were also formulated to check blasting vibrations, based on the vibration allowable values of West Germany standard, for the application to vulnerable construction zones. Should the two lines be placed for public service in 1985, about 40% of the total traffic population of Seoul city amounting to 15 million as of 1984 is estimated to be carried by subway with no difficulties.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.441-449
• /
• 2018

FE models for complex or large-scaled structures that need detailed modeling of structural components are usually constructed using commercial analysis softwares. Updating of such FE model by conventional sensitivity-based methods is difficult since repeated computation for perturbed parameters and manual calculations are needed to obtain sensitivity matrix in each iteration. In this study, an FE model updating procedure avoiding such difficulties by using response surface (RS) method and a Pareto-based multiobjective optimization (MOO) was formulated and applied to FE models constructed with a commercial analysis package. The test building is a low-rise reinforced concrete building that has been seismically retrofitted. Dynamic properties of the building were extracted from vibration tests performed before and after the seismic retrofits, respectively. The elastic modulus of concrete and masonry, and spring constants for the expansion joint were updated. Two RS functions representing the errors in the natural frequencies and mode shape, respectively, were obtained and used as the objective functions for MOO. Among the Pareto solutions, the best compromise solution was determined using the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) procedure. A similar task was performed for retrofitted building by taking the updating parameters as the stiffness of modified or added members. Obtained parameters of the existing building were reasonably comparable with the current code provisions. However, the stiffness of added concrete shear walls and steel section jacketed members were considerably lower than expectation. Such low values are seemingly because the bond between new and existing concrete was not as good as the monolithically casted members, even though they were connected by the anchoring bars.

• 한국재난정보학회 논문집
• /
• 제17권4호
• /
• pp.829-838
• /
• 2021

연구목적: 경제적, 기술적 이유로 내진설계가 되지 않은 기존의 콘크리트 구조물이나 내진설계나 면진 시공이 어려운 저층의 콘크리트 구조물이 지진력을 받을 때, 액체가 아닌 공기를 이용한 감쇠장치인 공기 스프링 댐퍼 시스템(Air Spring Damper System, ASDS)을 제안하고 한다. 연구방법: 자유진동의 운동방정식에서 감쇠력(Damping Force) 항인 $f_D=c{\dot{v}}$에 대한 연구를 수행하고자 하며, 이 장치가 댐퍼로서의 감쇠능력을 갖는 지에 대하여 실험적, 이론적으로 분석하며 현장적용에 대한 가능성 여부를 검토 한다. 연구결과: 에어 댐퍼 시스템은 제작 및 시공이 간편하고 형상, 크기, 재료 등에 제한이 적어서 댐퍼 의 개수가 증가하더라도 강재 이력형 댐퍼에 비하여 월등히 경제적이라 사료된다. 결론: 공기 스프링 댐 퍼 시스템에서는 감쇠비를향상을 위하여 공기 입출용 구멍의 직경을 줄이는 것이 필수이지만, 직경이 어느 이하의 크기로 줄어들면 공기의 압축성에 대한 고려가 필요하므로 공기 입출용 구멍의 직경과 공 기 압축성의 상관성에 대하여 추가적인 연구가 필요하다.

• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.410-418
• /
• 2017

저마루구조물의 안정성 및 배후 호안의 월파량은 배후수역의 수위에 영향을 받음에도 단면 수리모형실험 수행 시 수위상승량이 알려지지 않아 계측 결과가 왜곡될 수 있다. 본 연구에서는 저마루 구조물 제체 배후면의 평균수위 상승량을 예측하기 위해 단면수리모형실험과 해수유동수치모형실험을 수위-유량 관계식으로 결합하는 결합기법을 시도하였다. 이 기법을 사용함으로써 평균수위 상승량과 유속장을 단면수리모형실험과 동시간대에 얻을 수 있어 이러한 문제점들을 상당한 수준으로 해소할 수 있게 되었다. 또한 구조물의 개구부를 통한 유출유속의 강도에 관해서도 개략적인 정보를 얻을 수 있어 저마루구조물의 적정 평면배치안 선정에도 도움이 될 수 있다.