• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.25-31
• /
• 1999

Energy recovery technology from municipal solid waste has been increasingly established in many countries. Anaerobic treatment of municipal sewage sludge has low digestion efficiency because of low organic loading rate of sewage sludge. The purpose of this study was to evaluate anaerobic biodegradability of food waste which was based on organic loading rate and seeding rate. From the results of anaerbic biodegration, the optimum condition for seeding rate was turn out over 40%, which did not inhibition of methane production.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.77-82
• /
• 1996

New very low bit rate segmentation image coding technique is proposed by segmenting image into textually homogeneous regions. Regions are classified into on of three perceptually distinct texture classes (perceived constant intensity (class I), smooth texture (class II), and rough texture (class III) using the human Visual System (HVS) and the fractals. To design very low bit rate image coder, it is very important to determine nonoverlap and overlap segmentation method for each texture class. Good quality reconstructed images are obtained with about 0.10 to 0.21 bit per pixel (bpp) for many different types of imagery.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.624-634
• /
• 2011

Recently, the JCT-VC is developing the next generation video coding standard that is called HEVC. HEVC has adopted many coding technologies increasing coding efficiency. For chroma interpolation, DCT-based interpolation filter showing better performance than the linear filter in H.264/AVC was adopted in HEVC. In this paper, a combined filter that utilizes the FIR filter and the linear filter in H.264/AVC is proposed to increase coding efficiency. When the proposed method is compared with DCT-based interpolation filter, the experimental results for various sequences show that the average BD-rate improvements on chroma U and V components are 0.9% and 1.1%, respectively, in the high efficiency case of random access structure, those on U and V components are 1.1% and 1.1%, respectively, in the low complexity case of random access structure, those on U and V components are 0.9% and 1.4%, respectively, in the high efficiency case of low delay structure, and those on U and V components are 1.8% and 1.8%, respectively, in the low complexity case of low delay structure.

• Journal of Radiation Protection and Research
• /
• v.34 no.3
• /
• pp.102-106
• /
• 2009

We exposed ICR mice to low-dose (0.2 Gy) and low-dose-rate (0.7 mGy/h) $\gamma$-radiation ($^{137}Cs$) in the Low-dose-rate Irradiation Facility at the Radiation Health Research Institute to evaluate systemic effects of low-dose radiation. We compared the body and organ weights, number of blood cells (white and red blood cells and platelets), levels of biochemical markers in serum, and frequency of micronuclei in polychromatic erythrocytes between low-dose irradiated and non-irradiated control mice. The ICR mice irradiated with total doses of 0.2 and 2 Gy showed no changes in body and organ weights, number of blood cells (white and red blood cells), or frequency of micronuclei in the polychromatic erythrocytes of peripheral blood. However, the number of platelets (P = 0.002) and the liver weight (P < 0.01) were significantly increased in mice exposed to 0.2 and 2 Gy, respectively. These results suggest that a low-dose-rate of 0.7 mGy/h does not induce systemic damage. This dose promotes hematopoiesis in the bone marrow microenvironment and the proliferation of liver cells. In the future, the molecular biological effects of lower doses and dose rates need to be evaluated.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.30-35
• /
• 2024

Domestic rice is more expensive than imported products, so it is necessary to reduce production costs to secure competitiveness. Low-density planting developed in Japan is a cultivation technology that reduces labor and production costs without yield loss. The area of low-density cultivation is continuously increasing. However, research on how rice transplanters adapt to low-density planting has not been conducted. Therefore, this study was carried out to determine the optimal working conditions of a rice transplanter for low-density planting. Three types of rice transplanters were used and treated based on 3 conveying distance levels. The number of picked seedlings, pick missing rate, the number of planted seedlings, and the mis-planted rate were investigated to evaluate planting accuracy according to the transfer distance to the seedling tray. The results showed that the number of planted seedlings was 4.31~4.95 EA with an L1 seedling tray transfer distance (horizontal 9 mm, vertical 8 mm), but the mis-planted rate was higher than in other conditions. At L2 (horizontal 9 mm, vertical 10 mm) and L3 (horizontal 11 mm, vertical 8 mm) transfer distance conditions, the number of planted seedlings were 4.89-5.68 EA and 4.69-5.66 EA, respectively, with a low mis-planted rate of less than 3%. The results showed that if the transfer distance is adjusted properly, a rice transplanter can be used for low-density planting with high planting accuracy.

• Solar Energy
• /
• v.4 no.2
• /
• pp.13-28
• /
• 1984

Direct Absorption Receiver and Thermal Storage System is a complex problem. This paper describes only characteristic of fluid flow on the receiver. The fluid thicknesses of Molten Salts (Melting Point : $397^{\circ}C$) flowing on the receiver of modified protopype ($10m{\times}10m$) were calculated theorectically, changing the receiver slope from 60 degree to 85 degree (5 steps). The receiver temperatures were $430^{\circ}C$ at the top part and $950^{\circ}C$ at the low part. The flow thickness of the Molten Salts at the top part of the receiver are around 1.9mm in the case of maximum insolution ($50{\times}10^6$juoule/sec; 58.898kg/sec of flow rate) and 2.0mm at the low part. In the case of 3/10 of maximum insolation (flow rate = 17.669kg/sec) the flow thickness at the top part are around 0.9mm and 0.4mm at the low part, and in the case of 1/10 of maximum insolation (flow rate = 5.889 kg/see) the flow thickness at the top part are around 0.6mm and 0.3mm at the low part. From experimental measurements of a normal fresh water thickness flowing on the model plate ($12.7cm{\times}111.76cm$), around 0.8mm at the top part of the plate and around 0.7mm at the low part were obtained in the case of maximum insolation (flow rate = 0.12496 kg/see). In the case of 3/10 (flow rate = 0.03748 kg/see) and 1/10 (flow rate = 0.012496 kg/see) of maximum insolation, around 0.5mm and 0.4mm at the top part, and around 0.3mm and 0.2mm at the low part were obtained respectively. The reason why the thickness of the Molten Salts increase at the low part of the receiver only in case of maximum insolation is that decreasing rate of the viscosity of the Molten Salts is larger than decreasing rate of the density of the Molten Salts during temperature increase from the top to the low receiver plate and decrease of the fluid velocity in accordance with continuity principle. In all cases without the above maximum insolation, the thickness of the Molten Salts and the fresh water decreased at the low part of the plate because of gravity force effects rather than friction effects and of continuity principle. All simillar flow patterns were obtained through all cases of the insolation making an exception of only maximum insolation.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.35-53
• /
• 1996

The objective of the health promotion program was to strengthen the ability and willingness of individuals in the course of each stage of their lives to take action in support of their health and that of their families and communities in the home, the place of work and the school, and during recreation. The purpose of this study was to assess the need of school health promotion through health care behavior survey about diet, accident prevention, cigarette smoking experience, personal hygiene, visual impairment prevention, exercise, and environment protection. The subjects of this study were 914 students composed of Samrye, Bongdong, Samrye-Dong, Iseo, and Songkwang elementary school in Wanju area. The data were collected by questionaire corrected for the purpose of this study which had been developed by WHO, ‘Health behavior in school children’. These were carried out from March 20 to April 20, 1996. The data was analyzed by frequency, percentage, χ²-test with SPSS-PC+ program. The results were as follows. 1. Diet related behavior 1) Girl students eat less breakfast than male students. 2) Girl students eat less 3 times a day than male students. 3) The rate of eating nutritious medicine was high in order of 4th, 6th, and 5th graders. 4) Girl students drink less milk than male students. 5) The intake frequency of eating between meals was high in order of 6th, 5th, and 4th grader. 2. Cigarette smoking behavior 1) The rate of cigarette smoking rarely was high in 5th grader. 2) Male students smoke cigarette more than girl students. 3. Personal hygiene related behavior 1) The rate of washing hands after using toilet room was low in order of 4th, 5th, and 6th graders. 2) The rate of washing hands after using toilet room was low in male students. 3) The rate of washing hands when entering home from outdoor was low in male students. 4) The tooth brushing frequency before going to bed was low in male students. 5) The tooth brushing frequency was low in male students. 6) The rate of bathing was most low in 4th grader. 7) The rate of bathing was low in male students. 4. Visual impairment preventive behavior 1) The distance between eyes and book was near in order of 6th, 5th, and 4th graders. 5. Exercise 1) The exercise time in school was less in 4th grader. 2) The exercise time in school was less in girl students. 3) The exercise time out of school was less in 4th grader. 4) The exercise time out of school was less in girl students. 5) The self evaluation score about exercise ability was low in girl students. 6. Environment related behavior D The rate of collecting waste separately in school was most low in 4th grader.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.488-494
• /
• 2014

The effect of tungsten (W) addition on the hardenability of low-carbon boron steels was investigated using dilatometry, microstructural observations and secondary ion mass spectroscopy. The hardenability was discussed with respect to transformation behaviour aspects depending on the segregation and precipitation of boron at austenite grain boundaries. A critical cooling rate producing a hardness corresponding to 90 % martensite structure was measured from a hardness distribution plot, and was used as a criterion to estimate hardenability at faster cooling rates. In the low-carbon boron steel, the addition of 0.50 wt.% W was comparable to that of 0.20 wt.% molybdenum in terms of critical cooling rate, indicating hardenability at faster cooling rates. However, the addition of 0.50 wt.% W was not more effective than the addition of .0.20 wt.% molybdenum at slower cooling rates. The addition of 0.20 wt.% molybdenum completely suppressed the formation of eutectoid ferrite even at the slow cooling rate of $0.2^{\circ}C/s$, while the addition of 0.50 wt.% W did not, even at the cooling rate of $1.0^{\circ}C/s$. Therefore, it was found that the effect of alloying elements on the hardenability of low-carbon boron steels can be differently evaluated according to cooling rate.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.42-47
• /
• 2011

Measurement uncertainty analysis of fuel flow using turbine flowmeter was performed for the case of altitude engine test. SAE ARP4990 was used as the fuel flow calculation procedure, as well as the mathematical model for the measurement uncertainty assessment. The assessment was performed using Sensitivity Coefficient Method. 11 parameters involved in the calculation of the flow rate were considered. For the given equipment setup, the measurement uncertainty of fuel flow was assessed in the range of 1.19~1.86 % for high flow rate case, and 1.47~3.31 % for low flow rate case. Fluctuation in frequency signal from the flowmeter had the largest influence on the fuel flow measurement uncertainty for most cases. Fuel temperature measurement had the largest for the case of low temperature and low flow rate. Calibration of K-factor and the interpolation of the calibration data also had large influence, especially for the case of very low temperature. Reference temperature, at which the reference viscosity of the sample fuel was measured, had relatively small contribution, but it became larger when the operating fuel temperature was far from reference temperature. Measurement of reference density had small contribution on the flow rate uncertainty. Fuel pressure and atmospheric pressure measurement had virtually no contribution on the flow rate uncertainty.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.33-36
• /
• 2005

Effect of heating rate was studied on consolidation of the low-temperature-sinterable PMN-PT-BT powder by varying the heating rate from 5, 10, to $20^{circ}C/min$. Slow rate of $5^{circ}C/min$ showed more homogeneous microstructure than high rate of 10 or $20^{circ}C/min$ due to low PbO (m.p. $886^{circ}C$) evaporation at 850^{circ}C$. It showed sintered density of $7.93 g/cm^{3}$, room temperature dielectric constant of 15300, and dissipation factor of $0.92\%$.