• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.359-370
• /
• 2012

The endodontically treated tooth is generally restored with post and core, owing to the brittle and the loss of large amount of tooth structure. The purpose of this study was to evaluate the clinical status of fixed prostheses to improve the quality of dental care. In order to assess the clinical status of fixed prostheses, a total of 101 individuals (aged 30-89, 66 women and 35 men loaded with 125 fixed prostheses) who treated in the Department of Prosthodontics, Pusan National University Dental Hospital, between January 1990 to December 2005 were examined. The results of this study were as follows: 1. Length of service of fixed prostheses was $9.7{\pm}3.4$ years (mean), 11.1 years (median). 2. Age and sex of patient was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 3. Location of fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was low in anterio-posterior combination region (median:9.2 years). 4. Longevity of fixed prostheses made of base metal ceramic(median:12.0 years) and noble metal ceramic (median:11.3 years) is long (P<.05). 5. Number of units in fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 6. Condition of opposing dentition was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 7. Dental caries, periapical disease, tooth fracture were frequent complications. In 51.9% of the cases, abutment state after removing fixed prostheses was needed to be extracted.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.387-393
• /
• 2012

In order to improve storability of subtropical yam produced in South Korea, the major pathogens found during the storage were isolated and identified of the pathogenicity, and rot inhibition effect was studied based on the curing treatment condition. Penicillium sclerotigenum and Penicillium polonicum were identified as major pathogens causing rot in subtropical yam during storage, and P. sclerotigenum had stronger pathogenicity. Only the cut surface which has been made during a harvest and has been made smooth before curing generated a normal callus layer. The cut surface of tuberous root was cured in 95% of relativity humidity for three days at $23^{\circ}C$, and cured at $28^{\circ}C$ and $33^{\circ}C$. The observation of callus layer showed that the $23^{\circ}C$ treatment group had similar color saturation between tuberous root and pellicle, while the groups treated above $28^{\circ}C$ showed clear distinction. The generation rate of callus 0.5mm or bigger was 93 percent at $28^{\circ}C$ treatment, 96% at $33^{\circ}C$ treatment, but was 52% at $23^{\circ}C$ treatment. The conventional curing treatment group that used wind or sunlight at room temperature created little callus layer. The infection rate of pathogens according to the relative humidity inside the storage room was low at 40% and 60% of humidity, and the curing treatment period did not make a difference. When the humidity inside the storage room was 80%, all treatment groups rapidly increased the fungal pathogens. The rotten rate of each treatment was studied after 180 days during which the storage temperature was maintained at $16^{\circ}C$ and relative humidity 60%. While the rotten rate of tuberous root that has been cut in conventional curing treatment based on solar and wind was 43%, the one cured at over $28^{\circ}C$ and created the callus layer was less than 18%. While even a healthy tuberous root showed 25% of rotten rate in the traditional treatment group, the one cured at over $28^{\circ}C$ was less than 10%. The weight loss was 1-6% lower in the forced treatment group than in the conventional treatment group.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.135-149
• /
• 1990

Housing owners in Korea have a variety of tax advantages such as income tax exemption for the imputed rent of owner-occupied housing, exemption from the capital gains tax and deduction of the estate tax for one-house households. These tax reliefs for housing owners not only conflict with the principle of horizontal and vertical equity, but also lead to resource misallocation by distorting the housing market, and thus bring about regressive distribution effects. Particularly in the case of Korea with its imperfect capital market, these measures exacerbate the inter-class inequality of housing ownership as well as inequalities in wealth, by causing the affluent to demand needlessly large housing, while the poor and young experience difficulties in purchasing residential properties. Therefore, the Korean tax system must be altered as follows in order to disadvantage owner-occupiers, especially those owners of luxury housing. These alterations will promote housing-ownership, tax burden equity, efficiency of resource allocation, as well as the desirable distribution of income. First, income tax deductions for the rent payments of tenants are recommended. Ideally, the way of recovering the fiscal equivalence between the owner-occupiers and tenants is to levy an income tax on the former's imputed rents, and if necessary to give them tax credits. This, however, would be very difficult from a practical viewpoint, because the general public may perceive the concept of "imputed rent" as cumbersome. Computing the imputed rent also entails administrative costs, rendering quite reasonable, the continued exemption of imputed rent from taxation with the simultaneous deduction in the income tax for tenants. This would further enhance the administrative efficiency of income tax collection by easing assessment of the landlord's income. Second, a capital gains tax should be levied on the one-house household, except with the postponement of payments in the case that the seller purchases higher priced property. Exemption of the capital gains tax for the one-house household favors those who have more expensive housing, providing an incentive to the rich to hold even larger residences, and to the constructors to build more luxurious housing to meet the demand. So it is not desirable to sustain the current one-house household exemption while merely supplementing it with fastidious measures. Rather, the rule must be abolished completely with the concurrent reform of the deduction system and lowering of the tax rate, measures which the author believes will help optimize the capital gains tax incidence. Finally, discontinuation of the housing exemption for the heir is suggested. Consequent increases in the tax burden of the middle class could be mitigated by a reduction in the rate. This applies to the following specific exemptions as well, namely, for farm lands, meadows, woods, business fields-to foster horizontal equity, while denying speculation on land that leads to a loss in allocative efficiency. Moreover, imperfections in the Korean capital market have disallowed the provision of long term credit for housing seekers. Remedying these problems is essential to the promotion of greater housing ownership by the low and middle income classes. It is also certain that a government subsidy be focused on the poorest of the poor who cannot afford even to think of owning a housing.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.133-149
• /
• 2014

One of the main purposes of universities is to create new intellectual resources that will increase social values. These intellectual resources include academic research papers, lecture notes, patents, and creative ideas produced by both professors and students. However, intellectual resources in universities are often not distributed to the actual users or companies; and moreover, they are not even systematically being managed inside of the universities. Therefore, it is almost impossible for companies to access the knowledge created by university students and professors to utilize them. Thus, the current level of knowledge sharing between universities and industries are very low. This causes a great extravagant with high-quality intellectual and human resources, and it leads to quite an amount of social loss in the modern society. In the 21st century, the creative ideas are the key growth powers for many industries. Many of the globally leading companies such as Fedex, Dell, and Facebook have established their business models based on the innovative ideas created by university students in undergraduate courses. This indicates that the unconventional ideas from young generations can create new growth power for companies and immensely increase social values. Therefore, this paper suggests of a new platform for intellectual properties distribution with university-industry cooperation. The suggested platform distributes intellectual resources of universities to industries. This platform has following characteristics. First, it distributes not only the intellectual resources, but also the human resources associated with the knowledge. Second, it diversifies the types of compensation for utilizing the intellectual properties, which are beneficial for both the university students and companies. For example, it extends the conventional monetary rewards to non-monetary rewards such as influencing on the participating internship programs or job interviews. Third, it suggests of a new knowledge map based on the relationships between key words, so that the various types of intellectual properties can be searched efficiently. In order to design the system platform, we surveyed 120 potential users to obtain the system requirements. First, 50 university students and 30 professors in humanities and social sciences departments were surveyed. We sent queries on what types of intellectual resources they produce per year, how many intellectual resources they produce, if they are willing to distribute their intellectual properties to the industries, and what types of compensations they expect in returns. Secondly, 40 entrepreneurs were surveyed, who are potential consumers of the intellectual properties of universities. We sent queries on what types of intellectual resources they want, what types of compensations they are willing to provide in returns, and what are the main factors they considered to be important when searching for the intellectual properties. The implications of this survey are as follows. First, entrepreneurs are willing to utilize intellectual properties created by both professors and students. They are more interested in creative ideas in universities rather than the academic papers or educational class materials. Second, non-monetary rewards, such as participating internship program or job interview, can be the appropriate types of compensations to replace monetary rewards. The results of the survey showed that majority of the university students were willing to provide their intellectual properties without any monetary rewards to earn the industrial networks with companies. Also, the entrepreneurs were willing to provide non-monetary compensation and hoped to have networks with university students for recruiting. Thus, the non-monetary rewards are mutually beneficial for both sides. Thirdly, classifying intellectual resources of universities based on the academic areas are inappropriate for efficient searching. Also, the various types of intellectual resources cannot be categorized into one standard. This paper suggests of a new platform for the distribution of intellectual materials and human resources, with university-industry cooperation based on these survey results. The suggested platform contains the four major components such as knowledge schema, knowledge map, system interface, and GUI (Graphic User Interface), and it presents the overall system architecture.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.557-561
• /
• 1994

Q estimates are made by direct measurements of energy loss per cycle from primary P and S waves, as a function of frequency. Assuming that intrinsic Q is frequency independent and scattering Q is frequency dependent over the frequencies of interest, the relative contributions of each, to a total observed Q, may be estimated. Test examples are produced by computing viscoelastic synthetic seismograms using a pseudo spectral solution with inclusion of relaxation mechanisms (for intrinsic Q) and a fractal distribution of scatterers (for scattering Q). The composite theory implies that when the total Q for S-waves is smaller than that for P-waves (the usual situation), intrinsic Q is dominating; when it is larger, scattering Q is dominating. In the inverse problem, performed by a global least squares search, intrinsic $Q_p$ and $Q_s$ estimates are reliable and unique when their absolute values are sufficiently low that their effects are measurable in the data. Large $Q_p$ and $Q_s$ have no measurable effect and hence are not resolvable. Standard deviation of velocity $({\sigma})$ and scatterer size (A) are less unique as they exhibit a tradeoff as predicted by Blair's equation. For the P-waves, intrinsic and scattering contributions are of approximately the same importance, for S-waves, the intrinsic contributions dominate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4602-4609
• /
• 2013

In summer and winter, the difference between the temperature during the day and that during the night is high, which leads to various problems during concrete placement, such as cracks and defects in the concrete as well as low durability and strength. Although nuclear power plant concrete is widely used for placement in all seasons, particular attention must be paid to its quality during the summer. Therefore, we evaluated the effects of a cooling method for mixing water, which is a commonly used hot weather precooling method, and the use of a retarder, on the characteristics of Nuclear Power Plant concrete. In the cooling method for mixing water, cold water at 5 was used, with 50% of the water content consisting of ice flakes. The effects of using a retarder were evaluated by reviewing the characteristics of the cement at the unset stage and after hardening. To evaluate the characteristics of the unset cement, we measured the slump, air volumes, setting times, and pressure strengths after hardening. Furthermore, we measured the heat of hydration at different temperatures; the loss of heat was minimized using insulation. Both the slump time and the complete ageing time of the air volume were found to be 120 min at $20^{\circ}C$ and 40 min at $40^{\circ}C$. In the case when the cooling method for mixing water was used and in the case when a retarder was used, the initial and final sets by penetration resistance were delayed, and the delay decreased with increasing air temperature. For the heat of hydration, the cooling method for mixing water not only lowered the maximum temperature but also delayed its attainment. However, the use of a retarder had no effect on the maximum temperature. Moreover, in the early ages (e.g., 3 and 7 days), the pressure strength of the concrete was lower than that of plain cement. However, the strength of 28-day concrete met the standard construction specifications.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of Chest Surgery
• /
• v.38 no.2 s.247
• /
• pp.110-115
• /
• 2005

Background: The aims of this paper were to review the mid term clinical results and to analyze the preoperative risk factors of isolated aortic valve replacement (AVR). Material and Method: Between January 1992 and February 2003, 80 patients underwent isolated AVR. 58 were male and 22 were female patients, raging from 12 to 75 years of age (mean :$46.8{\pm}13.0$ years). 74 patients except one early death and 5 follow-up loss were contacted by OPD or by telephone. The mean duration of follow-up was $44.2{\pm}29.7$ months and the total cumulative period was 272.8 patient-year. Result: The complications in hospital occurred in 35 cases : 12 wound problems (11 superficial, 1 deep), 11 arrhythmias (9 temporary, 2 persistent), 3 low cardiac output, and so forth. The late deaths were 4 cases : the heart-related deaths were 2 cases ($0.7\%$ patient-year). Conclusion: The risk factors that influenced the early mortality and morbidity were older age (> 60 years)(p=0.04), poor preoperative NYHA functional class (> 3) (p=0.048), high preoperative serum creatinin level (> 1.2 mg/100 ml)(p=0.031), long operation time (aortic clamping time>90 min)(p=0.042). The same factors influenced the late mortality and morbidity. Freedom from valve-related complication was $86.4{\pm}5.3\%,$ actuarial survival rate were $96.8{\pm}2.3\%$ at 3 years and $90.8{\pm}4.6\%$ at 10 years.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.128-134
• /
• 1975

For development of long-term storage method of sweet-persimmons using polyethylene film bags, basic experiment was conducted with 30 boxes of sweet-persimmons in 1973 and the same experiment was extended for industrial application with 2,500 boxes of the persimmons in the cold storage of Jinyoung Sweet-persimmon Association in 1974. Investigation was made on change of the quality by storage period. At the same time, persimmons put in the cold storage test were shipped to market at different time in order to monitor consumer response and commercial feasibility. The followings are conclusion obtained from the result of this experiment. 1. Storage of sweet-persimmon, Buyu, produced in Jinyoung, Kimhae was possible for 1 month at $2^{\circ}C{\pm}1^{\circ}C$ cold storage. This storage period was extended to 4 months until the end of February in case that the fruits were hermetically sealed in P.E. film bags of 0.08 to 0.1 mm thickness. 2. During the storage period of sweet-persimmons packed in the film bags, the loss of weight due to evaporation was effectively prevented with use of the film of bag thicker than 0.04 mm. 3. The storage ability of 3-5 persimmons per small bag was somewhat superior to that of many persimmons packed in the large box of 15kg capacity. 4. The thicker the film of bags, the more $CO_2$ gas was accumulated inside, however, from 1 month after beginning of the storage the rate of $CO_2$ accumulation became very low maintaining the stabilized level of 5-6% at the plot of 0.06-0.08mm thick bags. 5. While the persimmons were in storage, decreased was the content of total sugars, total acids, and vitamin C, of which the phenomenon was remarkable especially with the fruits of non-packed plot. 6. The sweet-persimmons in the film bags subjected to cold storage when shipped to market in their intact condition were more beneficial than when they were shipped out in unpacked condition. The intact fruits packed in the P.E. film bags were able to keep their commercial value for 10days in the outdoor situation. 7. The sweet-persimmons that were packed in the film bags and put in the cold storage had maintained promissing marketability and the economic feasibility was acknowledged when the experimental practice was applied to industrial scale.