• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.94-101
• /
• 1977

Noise pollution, both in the environment and in the workplace, has been recognized as a major health hazard -one that can impair not only a person's hearing but also his physical and mental well-being. As industrialization progresses, the prevalence rate of occupational diseases is increasing, especially hearing loss, which has the highest prevalence rate among the occupational diseases. The major cause of noise is the construction of various large industries without any regulation of noise sources. Therefor, we must establish an enactment to control mechanical noise sources. as soon as possible. For the purpose of controlling the noise source, we must have exact data about such things as the sound level, the frequency of the peak sound and the revolutions per minute (r.p.m.) of the machine (a measure of the power of its motor). This study was undertaken in order to define the noise characteristics, the power of the machine's motor, the change of the sound level and the peak sound as the r.p.m. increases, and the permissible exposure time. The sample size of this study was 74 machines at 11 plants in 6 industries. The results are as follows; 1. The breakdown of the types of mechanical noise noted was : 63.6% continuous normal sound, 26.9% intermittent sound, 4.7% continuous repeating sound and 4.6% impulsive sound. 2. With respect to the type of industry, the overall sound level was the highest in the mechanical industry, with $103.8{\pm}2.8dB(A)$, and lowest in the textile industry, with $89.2{\pm}1.43dB(A)$. 3. With respect to the type of machine, the highest sound level was 124 dB(A) caused by Gauzing(II), in the mechanical industry, and the lowest was 76 dB(A) caused by Attachment (Jup Chack) (I) in the timber industry. 4. The shortest permissible exposure time to Gauzing(II) in the mechanical industry was less than 15 minutes. 5. Among 74 machines, 68.2% of the peak sound was situated in the high frequency range (52.7% at 2 KHz, 4.1% at 4 KHz and 1.4% at 8 KHz). 41.8% of the peak sound was in the middle frequency range (4.1% at 250Hz, 14.8% at 500Hz and 22.9% at 1KHz). 6. If one machine had two motors or more, the peak sound was shifted to the low frequency range. 7. As the r.p.m. increased, the overall and peak sound levels were increased without any change of the frequency of the peak sound. 8. Whenever the machines had the same kind and the same r.p.m., the overall and peak sounds were changed by the physicochemical characteristics of the raw materials and the management.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.403-408
• /
• 2005

The objective of this study was to investigate the effects of supplemental levels of Bamboo vinegar (BV) on meat quality characteristics of Hanwoo. A total of 15 cows $(400.0\pm15.0\;kg)$ was fed with a commercial diet (control) or $3\%$ bamboo vinegar supplemented diets $(3\%\;BV),\;6\%$ BV for four months. Then, cows were slaughtered and M. longissimus dorsi (LD) was collected from each treatment group During storage at $4^{\circ}C$ for 21day, physico-chemical, microbiological and sensory characteristics were determined It increased (p<0.05) in at 3 and 9 days of the refrigeration storage. Hunter a value decreased (p<0.05) in the meat fed with $3\%\;and\;6\%$ BV at 1, 3 and 9 days. Hunter b value increased (p<0.05) in $3\%\;and\;6\%$ BV at 1 and 3 days. TBA and total bacterial count were significantly (p<0.05) low in $3\%\;and\;6\%$ BV at 1 and 3 days. Supplementation of $3\%\;or\;6\%$ BV showed a significant (p<0.05) decrease in cooking loss at 9 and 15 days. $3\%\;and\;6\%$ BV showed a significant (p<0.05) decrease in shear force at 1, 3 and 9 days; it tended to decrease throughout the whole storage period The treatments $3\%\;and\;6\%$ BV scored high in area of taste; taste increased significantly (p<0.05) at 1 and 3 days.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.460-468
• /
• 2011

We evaluated the effect of adding mechanically deboned chicken meat (MDCM) (0, 10, 20, 30 or 50%) on quality characteristics of chicken sausage. Adding MDCM decreased the protein content of chicken sausage, but ash content increased significantly. Adding MDCM had no effect on pH and water holding capacity of sausage. Adding MDCM increased cooking loss, but did not affect the shear force value of the sausage. Adding MDCM decreased the L- (lightness) and b- (yellowness) values but increased the a- (redness) value of sausage. Adding MDCM decreased the hardness and cohesiveness values, but did not affect the springiness value of chicken sausage. Adding MDCM decreased the juiciness and hardness but increased the flavor and chewiness scores of chicken sausage. Regardless of the MDCM addition level, all chicken sausage contained low residual nitrite ion (<4 ppm). During the 10 d of storage at $4^{\circ}C$, adding MDCM did not affect total microbial count or TBA values of chicken sausage, but the VBN value of the sausage increased slightly. However, all storage characteristic values in the sausage were within the safety range. Adding MDCM (0, 10 or 20%) to chicken sausage resulted in a finely structured protein matrix under scanning electron microscopy (SEM), which indicated a good meat emulsion, but adding MDCM at more than 20% resulted in a very coarse protein matrix structure.

• Food Science of Animal Resources
• /
• v.40 no.2
• /
• pp.242-253
• /
• 2020

Currently, there is a growing interest among consumers in selecting healthier meat with a greater proportion of essential fatty acids (FA). This experiment was conducted to evaluate the role of different ratios of dietary n-6:n-3 on growth performance, FA profile of longissimus dorsi (LD), relative gene expression of cytokines, meat quality, and blood parameters in finishing pigs. A total of 108 finishing pigs was randomly allotted to three treatments including a control (basal diet) and low ratios (4:1 and 2:1) of n-6:n-3. The 4:1 and 2:1 diets decreased the overall stearic acid in LD. There were reductions in the content of stearic acid, palmitoleic acid, total saturated acid, and n-6:n-3 ratio of LD in pigs fed 4:1 and 2:1 diet compared with the control diet. The 4:1 and 2:1 diets increased the concentration of α-Linolenic acid and polyunsaturated FA in the LD of pigs. Acetyl-CoA carboxylase enzyme gene was down-regulated in pigs fed 2:1 diet compared with finishing pigs fed the control or 4:1 diets. The relative expression of hormone-sensitive lipase was increased in pigs fed 2:1 and 4:1 ratio diets. Lower total cholesterol of plasma was observed in finishing pigs fed 2:1 and 4:1 diets. The cooking loss ratio of meat was lower in pigs fed the 2:1 and 4:1 diets compared with the control diet. Pigs fed the 4:1 and 2:1 diets had greater final body weight. In conclusion, the 2:1 and 4:1 diets have the potential to increase the meat quality and growth performance of pigs.

• Korean Journal of Clinical Pharmacy
• /
• v.27 no.2
• /
• pp.92-98
• /
• 2017

Background: Nebulized colistimethate is increasingly used, because there are problems such as renal dysfunction and low distribution within the lungs when colistimethate is administered intravenously. This study was designed to compare and analyze the changes in renal function by of nebulized colistimethate treatment for its safe administration. Methods: This study retrospectively reviewed the electronic medical records of adult patients above 19 years old, receiving only the nebulized colistimethate at least 4 days in Yonsei university health system from Nov 2014 to Aug 2015. Acute kidney injury (AKI) was determined by using the RIFLE criteria (Risk, Injury, Failure, Loss and End-stage renal disease) according to serum creatinine (SCr) levels before and after use of nebulized colistimethate. Results: 48 patients were included our study and their SCr increased significantly after nebulized colistimethate treatment ($SCr_0$ vs. $SCr_1$; $0.85{\pm}0.80$ vs. $1.00{\pm}0.82mg/dL$, n=48, p<0.001), but the changes were in normal range according to the standards at Yonsei university health $system^a$. Among 48 patients, 38 patients were in the non-AKI group (79.2%), and 10 patients developed AKI (20.8%). Within the AKI group, 2 patients were in the Injury group (20%) and the other 8 in the Risk group (80%). Conclusion: There was no significant difference in age, dosage and duration of treatment between AKI group and non-AKI group (p>0.05). The study has a significance in that it reviewed the safety of nebulized colistimethate only treatment to national patients, analyzing its nephrotoxicity. It has confirmed that nebulized colistimethate is a safer method than intravenous injection, and requires to establish a guideline for the use of nebulized colistimethate in further studies with broader patient groups. $^a$ : SCr Male 0.68-1.19 mg/dL, Female 0.49-0.91 mg/dL.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.1
• /
• pp.25-28
• /
• 2011

Autism is a developmental, neuropsychiatric disorder that begins in early childhood. A patient with autism seen in the dental office frequently may have many complications. Therefore, it may be needed to consider modified or alternative therapy for dental care of autistic patients. This is the case of a 16-year old boy who have autism. He came to the department of the pediatric dentistry, Yonsei University Dental Hospital, for evaluation and treatment of dentigerous cyst associated with impacted teeth(#33,34,35). Under daily hospitalization and general anesthesia, the cyst was enucleated with surgical extraction of #34 and autotransplantation of #33,35. And during the periodic dental followup, apexification of #33,35 was performed for periapical lesion and root maturity. At 2 year 6 months follow- up, now, bony healing was completed and there are some complications like external resorption of #33 and space loss of #34 area. Generally, the marsupialization has been widely recommended for treatment of dentigerous cyst. However, in this case, there is a little possibility of spontaneous eruption after marsupialization considering of patient's age, location and angulation of the impacted tooth, root maturity. And there is necessity to choose the treatment that has low recurrence risk and needs short-term follow-up for autism. Above all, poor oral hygiene and lack of cooperation for decompression treatment is a matter of primary consideration. Consequently, enucleation of the cyst was chosen for the final treatment plan in this case. It is important to consider the conditions that affect the eruption of a dentigerous cyst-associated tooth to predict the successful eruption and special health care needs of the patient when the treatment plan is settled.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.63-70
• /
• 2001

We demonstrate the MMIC (monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 GHz local oscillator signals from 14.5 GHz input signals. These devices were designed and fabricated by using the M MIC integration process of $0.1\;{\mu}m$ gate-length PHEMTs (pseudomorphic high electron mobility transistors) and passive components. The measurements showed S11 or -9.2 dB at 145 GHz, S22 of -18.6 dG at 29 GHz and a minimum conversion loss of 18.2 dB at 14.5 GHz with an input power or 6 dBm. Fundamental signal of 14.5 GHz were suppressed below 15.2 dBe compared to the second harmonic signal at the output port, and the isolation characteristics of fundamental signal between the input and the output port were maintained above :i0 dB in the frequency range 10.5 GHz to 18.5 GHz. The chip size of the fabricated MMIC frequency doubler is $1.5{\times}2.2\;mm^2$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.60-68
• /
• 2010

In case of sensorineural hearing loss, auditory perception can be activated by electrical stimulation of the nervous system via electrode implanted into the cochlea or auditory nerve. Since the tonotopic map of the human auditory nerve has not been definitively identified, the recording of auditory nerve signal with microelectrode is desirable for determining the tonotopic map. This paper proposes the multi-channel analog front-end for auditory nerve signal detection. A channel of the proposed analog front-end consists of an AC coupling circuit, a low-power 4th-order Gm-C LPF, and a single-slope ADC. The AC coupling circuit transfers only AC signal while it blocks DC signal level. Considering the bandwidth of the auditory signal, the Gm-C LPF is designed with OTAs adopting floating-gate technique. For the channel-parallel ADC structure, the single-slope ADC is used because it occupies the small silicon area. Experimental results shows that the AC coupling circuit and LPF have the bandwidth of 100 Hz - 6.95 kHz and the ADC has the effective resolution of 7.7 bits. The power consumption per a channel is $12\;{\mu}W$, the power supply is 3.0 V, and the core area is $2.6\;mm\;{\times}\;3.7\;mm$. The proposed analog front-end was fabricated in a 1-poly 4-metal $0.35-{\mu}m$ CMOS process.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.13-20
• /
• 2008

Although digital hearing aid algorithms have been developed to compensate hearing loss and to help hearing impaired people to communicate with others, digital hearing aid user still complain about difficulty of hearing the speech. The reason could be the quality of speech through digital hearing aid is insufficient to understand the speech caused by feedback, residual noise and etc. And another thing is masking effect among formants that makes sound quality low. In this study, we measured the masking characteristics of normal listeners and hearing impaired listeners having presbyacusis to confirm masking effect in speech itself. The experiment is composed of 5 tests; pure tone test, speech reception threshold (SRT) test, word recognition score (WRS) test, puretone masking test and speech masking test. In speech masking test, there are 25 speeches in each speech set. And log likelihood ratio (LLR) is introduced to evaluate the distortion of each speech objectively. As a result, the speech perception became lower by increasing the quantity of formant enhancement. And each enhanced speech in a speech set has statistically similar LLR, however speech perception is not. It means that acoustic masking effect rather than distortion influences speech perception. In actuality, according to the result of frequency analysis of the speech that people can not answer correctly, level difference between first formant and second formant is about 35dB, and it is similar to result of pure tone masking test(normal hearing subject:36.36dB, hearing impaired subject:32.86dB). Characteristics of masking effect is not similar between normal listeners and hearing impaired listeners. So it is required to check the characteristics of masking effect before wearing a hearing aid and to apply this characteristics to fitting.