• 제목/요약/키워드: low-loss

검색결과 5,103건 처리시간 0.034초

타설 직후의 동해가 콘크리트의 압축강도에 미치는 효과 (The Effect of Early Frost Damage after Placement on Compressive Strength of Concrete)

  • 이윤;김진근;이성태
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.1199-1202
    • /
    • 2001
  • The objective of this study is to examine the effect of frost damage immediately after placement on compressive strength of concrete. Obviously frost damage produced under low curing temperature at early ages causes the loss of compressive strength of concrete. In order to find the degrees of the loss of compressive strength, compressive strength tests was peformed at 7 and 28-day ages on concrete specimen with various curing temperature history. The results from the tests showed that the loss of compressive strength relative to concrete cured under isothermal temperature at $20^{\circ}C$ was generally from 20 to 50% for 7-day ages and below 20% for 28 day ages. Considering the serious loss of compressive strength over 50% for some cases, careful attention may be needed to placing of concrete under low atmospheric temperature.

  • PDF

A Simple ZVT PWM Single-Phase Rectifier with Reduced Conduction Loss and Unity Power Factor

  • Kim, In-Dong;Choi, Seong-Hun;Nho, Eui-Cheol;Ahn, Jin-Woo
    • Journal of Power Electronics
    • /
    • 제7권1호
    • /
    • pp.55-63
    • /
    • 2007
  • This paper proposes a simple unity power factor zero-voltage-transition (ZVT) pulse-width-modulated (PWM) single-phase rectifier, which features reduced switching and conduction losses. The switching loss reduction is achieved by a simple auxiliary commutation circuit, and the conduction loss reduction is achieved by employing a single-stage converter, rather than a typical double-stage converter comprising of a front-end rectifier and a boost rectifier. Furthermore, thanks to good features such as a simple PWM control at constant frequency, low switch stress, low Var rating of commutation circuits, and simple power circuit structure, it is suitable for high power applications. The principles of operation are explained in detail, and a major characteristics analysis and the experimental results of the new converter are also included in this paper.

Improved Magnetic Properties of Silicon-Iron Alloy Powder Core

  • Lee, Tae-Kyung;Kim, Gu-Hyun;Choi, Gwang-Bo;Jeong, In-Bum;Kim, Kwang-Youn;Jang, Pyung-Woo
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1191-1192
    • /
    • 2006
  • Eventhough Fe-6.5 wt.% Si alloy shows excellent magnetic properties, magnetic components made of the alloy are not totally because of its extremely low ductility. In order to overcome this demerit of alloy, 6.7 wt.% Si alloy powders were produced by gas atomization and then post-processed to form magnetic cores. By doing so, the total core loss could be minimized by reducing both hysteresis and eddy current loss. From our experiments, we were able to achive a core loss of $390mW/cm^3$ at 0.1 T and 50 kHz through proper processes and a permeability $\mu_{eff}$ of 68 at low frequency.

  • PDF

Low Loss Highly Birefringent Porous Core Fiber for Single Mode Terahertz Wave Guidance

  • Habib, Md. Ahasan;Anower, Md. Shamim
    • Current Optics and Photonics
    • /
    • 제2권3호
    • /
    • pp.215-220
    • /
    • 2018
  • A novel porous-core hexagonal lattice photonic crystal fiber (PCF) is designed and analyzed for efficient terahertz (THz) wave propagation. The finite element method based Comsol v4.2 software is used for numerical analysis of the proposed fiber. A perfectly matched layer boundary condition is used to characterize the guiding properties. Rectangular air-holes are used inside the core to introduce asymmetry for attaining high birefringence. By intentionally rotating the rectangular air holes of porous core structure, an ultrahigh birefringence of 0.045 and low effective material loss of $0.086cm^{-1}$ can be obtained at the operating frequency of 0.85 THz. Moreover, single-mode properties, power fraction in air core and confinement loss of the proposed PCF are also analyzed. This is expected to be useful for wideband imaging and telecom applications.

Basic Study of IPMSM with High-Temperature Superconducting Wire Rod

  • Okada, Kazuya;Morimoto, Shigeo;Sanada, Masayuki;Inoue, Yukinori
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제2권2호
    • /
    • pp.148-153
    • /
    • 2013
  • It is important to improve the efficiencies of motors to overcome problems such as decreasing energy reserves and environmental pollution. Superconductors are promising for developing high-efficiency motors. However, superconducting wires must be kept in critical conditions and the AC loss needs to be minimized. In this paper, a design of a superconducting interior permanent magnet synchronous motor (IPMSM) is proposed that reduces the AC loss. The characteristics of superconducting and normal-conducting IPMSMs are compared. The proposed superconducting IPMSM has a low AC loss and a very high efficiency at low speeds.

선형터빈 케스케이드 통로내의 2차 유동과 손실에 관한 연구 (The Experimental Investigation of the Secondary Flow and Losses Within the Plane Turbine Cascade Passage)

  • 이기백;양장식;나종문
    • 대한기계학회논문집
    • /
    • 제19권3호
    • /
    • pp.784-795
    • /
    • 1995
  • This paper represents the results of the experiments of the three-dimensional flow and the aerodynamic loss caused by the three-dimensional flow within the plane bucket blades. To research the secondary flow and the aerodynamic loss, the large-scale plane bucket blade of lst-stage in the low pressure steam turbine is made of FRP. The detailed investigation of the secondary flow and the aerodynamic loss using 5-hole pressure probe within turbine cascade has been carried out in the low speed wind tunnel. The limiting streamlines of the suction and endwall surface have been visualized by the oil film method. The flow visualization of the secondary flow has been performed by the laser light sheet technique and image processing system. By using the method mentioned above, it is possible to observe the evolution of the pitchwise mass-averaged flow deviation angle and total pressure loss coefficient, the secondary flow, and the aerodynamic loss through the cascade.

고효율 전력 증폭기를 위한 재구성성이 있는 전력 분배기 (A Reconfigurable Power Divider for High Efficiency Power Amplifiers)

  • 김승훈;정인영;정진호
    • 한국전자파학회논문지
    • /
    • 제20권2호
    • /
    • pp.107-114
    • /
    • 2009
  • 본 논문에서는 저출력에서의 효율을 높이기 위한 전력 증폭기 시스템과 이 시스템에 필요한 재구성성이 있는 전력 분배기를 제안한다. 저출력에서의 효율을 높이게 되면, 무선 통신용 선형 전력 증폭기의 평균 효율을 높일 수 있다. 제안한 전력 분배기는 출력의 크기에 따라 고출력 모드와 저출력 모드로 동작한다. 각 모드에서 신호의 경로가 재구성되고 임피던스 정합도 이루어진다. 이러한 재구성성이 있는 전력 분배기는 두 개의 $\lambda/4$ 결합 선로(coupled line)와 두 개의 스위치로 구성된다. 제작된 전력 분배기는 중심주파수 0.9 GHz에서 고출력 모드일 때 반사손실($S_{11}$)과 삽입손실($S_{21}$)이 각각 -16.49 dB와 -0.83 dB, 저출력 모드일 때 반사 손실($S_{11}$)과 삽입손실($S_{31}$)이 각각 -16.28 dB와 -0.73 dB였다. 이 결과를 통해 각 모드에서 신호의 경로가 재구성되며 임피던스 정합이 이루어지는 것을 확인하였다.

건축건설공사의 공종별 위험도와 직무스트레스의 상관관계 (Relationship between the Risk Level and the Job Stress Level of Work Types in Architectural Work)

  • 김정민;이종빈;장성록
    • 한국안전학회지
    • /
    • 제32권4호
    • /
    • pp.73-78
    • /
    • 2017
  • In this study, the risk level of architectural works was calculated by applying work period and number of input workers based on accidents records from 2012 to 2014 and the architectural works were divided into four groups(High-High, High-Low, Low-High, Low-Low) according to risk levels of fatal accidents and loss time accidents. And then questionnaire on the job stress level of workers was performed for 670 workers working in the architectural work using Korean Occupational Stress Questionnaire Form developed by KOSHA. And then the relationship between the risk level and job stress level of four groups was analyzed. Results showed that 1) risk levels of fatal and loss time accidents applied by work period and input workers were analyzed to be different with those of previous research based on the number of fatal and loss time accidents; 2) job stress level of workers has been analyzed to have a significant relationship with the risk level of fatal and loss time accident; 3) specially, the average of job stress level of 'HH(High-High)' group was higher than those of other groups; 4) among the subfactors of job stress, interpersonal conflict, job insecurity, organizational system and lack of reward were analyzed to be key factors to affect the risk level.

가미 태음조위탕과 저열량 식이를 병행한 체중 감량 프로그램에서 발생한 이상 반응 분석 (Analysis of Adverse Events in Weight Loss Program in Combination with 'Gamitaeeumjowee-Tang' and Low-Calorie Diet)

  • 윤나라;유영재;김민지;김서영;임영우;임형호;박영배
    • 한방비만학회지
    • /
    • 제18권1호
    • /
    • pp.1-9
    • /
    • 2018
  • Objectives: The objective of this study was to assess the safety of 'Gamitaeeumjowee-tang' by analyzing adverse events in weight loss program in combination with 'Gamitaeeumjowee-tang' and low-calorie diet. Methods: A retrospective review of adverse events in weight loss program in combination with 'Gamitaeeumjowee-tang' and low-calorie diet from the electronic medical chart (n=124) between June 2015 and December 2016 was conducted. Three Korean Medicine Doctors (KMDs) reviewed adverse events for two times, during week 2 to 4 and at week 10, after starting weight loss program. Adverse events were evaluated in terms of causality, severity and system-organ classes. Also, agreement among the three KMDs was made through further discussion in case of disagreement after independent review. Results: The overall rate of adverse events was 37.1% during week 2 to 4 and 16.9% at week 10. For causality of adverse events using the World Health Organization-Uppsala Monitoring Centre causality categories, 52.2% were evaluated 'possible' at week 2-4 and 57.1% were evaluated 'unlikely' at week 10. All symptoms were evaluated as 'mild' by LDS scale. Nausea (15, 12.1%) was the most frequent adverse event at week 2-4 and dizziness (6, 4.8%) was the most common at week 10. Conclusions: Adverse events decreased over time. There were no serious adverse events and none of the subjects were dropped due to adverse events. Continuous study is needed to prove the safety of 'Gamitaeeumjowee-tang' for treating obesity.

천해 저주파 잔향음 예측모델 (Shallow Water Low-frequency Reverberation Model)

  • 김남수;오선택;나정열
    • 한국음향학회지
    • /
    • 제21권8호
    • /
    • pp.679-685
    • /
    • 2002
  • 천해에서의 저주파 단상태 잔향음 모델 (L-HYREV: Low-frequency Hanyang univ. Reverberation model)을 개발하였다. 음선이론 (ray-theory)에 기초한 전파모델은 해저 내로 투과되는 음파에 대한 효과를 적절하게 고려할 수 없으므로, 해저 내 상호작용을 계산할 수 있는 전파모델이 필요하다. 따라서 본 논문에서는 RAM(Range dependent Acoustic Model)을 이용해서 전달손실을 계산 후, 다중경로 확장모델 (multi-path expansion model)을 이용해서 산출한 전달손실을 보정하였다. 모델의 검증을 위하여 GSM (generic sonar model) 잔향음 모의 신호 및 실측 잔향음 신호와 비교하였으며, 비교 결과 GSM보다 L-HYREV 모델이 저주파 잔향음 예측에 적합함을 확인할 수 있다.