• 한국수자원학회논문집
• /
• 제42권3호
• /
• pp.247-257
• /
• 2009

본 연구에서는 다방향 흐름 분배 알고리듬과 실시간 보정 알고리듬을 개발하여 분포형 강우-유출 모형에 적용하였다. 개발된 알고리듬의 적용과 분포형 모형 적용상의 약점인 계산시간 개선을 위해 비교적 간단한 수문과정 지배 방정식들을 이용하여 분포형 강우-유출 모형을 작성하였다. DEM(Digital Elevation Model)를 이용하여 공간해상도 변화에 따른 지형정보와 흐름정보의 변동성을 파악하였다. 모의수행 전처리 과정으로 가용한 고해상도 DEM 자료를 사용하여 공간해상도 변화에 따른 흐름정보의 손실을 최소화하고 상세흐름정보를 저해상도 흐름정보에 반영시키는 다방향 흐름분배 알고리듬을 개발하였다. 또한 실시간으로 유역상태량을 보정하는 실시간 보정 알고리듬을 개발하다. 개발된 모형은 저해상도 모의에서 유출 과정의 실제적 거동 정보를 유지할 수 있다. 그러므로 예측 정확도 향상 및 계산시간의 개선이 기대된다.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.377-385
• /
• 1996

This study aims at the estimation of a river management flow in urban basin analyzing Sinchun basin to be the tributary of Kumho river basin. The river management flow has to satisfy a low flow as natural flow and an environmental preservation flow estimated by a dilution flow to satisfy a target water quality in drought flow. Therefore for the estimation of a river management flow in Sinchun in this study, first Tank model as a basin runoff model estimates a low flow, a drought flow from a flow duration curve in Sinchun, second QUAL2E model as water quality model simulates water quality in Sinchun and estimates environmental preservation flow to satisfy a target water qua%its, BOD 8 mg/l by a dilution flow derived from Kumho river, Nakdong river and around water. And the river management flow is estimated by addition of a use flow and a loss flow to more flow between a low-flow and an environmental preservation flow.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.93-98
• /
• 2001

This study was performed to analyse the rainfall and the rainfall-runoff characteristics of a rural watershed. The Sangwha basin($105.9km^{2}$) in the Geum river system was selected for this study. The arithmetic mean method, the Thiessen's weighing method, and the isohyetal method were used to analyse areal rainfall distribution and the Huff's quartile method was used to analyse temporal rainfall distribution. In addition, daily runoff analyses were peformed using the DAWAST and tank model. In the model calibration, the data from June through November, 1999 were used. In the model calibration, the observed runoff depth was 513.7mm and runoff rate was 45.2%, and the DAWAST model simulated runoff depth was 608.6mm and runoff rate was 53.5%, and the tank model runoff depth was 596.5mm and runoff rate was 52.5%, respectively. In the model test, the data from June through November, 2000 were used. In the model test, the observed runoff depth was 1032.3mm and runoff rate was 72.5%, and the DAWAST model simulated runoff depth was 871.6mm and runoff rate was 61.3%, and the tank model runoff depth was 825.4mm and runoff rate was 58%, respectively. The DAWAST and tank model's $R^{2}$ and RMSE were 0.85, 3.61mm, and 0.85, 2.77mm in 1999, and 0.83, 5.73mm, and 0.87, 5.39mm in 2000, respectively. Both models predicted low flow runoff better than flood runoff.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.113-119
• /
• 1991

본 연구에서는 월 강우량과 월 증발량 자료만 있는 하천유역에 대하여 장기 물수지 분석을 실시하는 방법론을 제시하고져 하였다. 단기간의 월 강우량 자료를 경혐공식에 의해 월 유출량 자료로 변환시킨 후 추계학적 모의발생 모형을 사용하여 이들 단기 유출자료로부터 일군의 장기 유출자료계열을 발생시켰고, 자료계열별로 갈수빈도해석에 의해 최대 갈수기간 및 월 강수량계열을 작성하였다. 계획년도별 각종 용수수요를 표준절차에 의해 추정하였으며 순 물소모량도 계산하였다. 유역내의 기존 저수지를 총괄하는 합성저수지를 통해 Deficit-Supply 방법으로 물 수지분석을 실시한 결과 물 부족량은 갈수재현기간이 커짐에 따라 급격하게 커지는 것으로 나타났다. 이는 하천 유역의 장기 물 수지분석을 통해 신뢰성있는 물 부족량을 계산하기 위해서는 추계학적 모의발생모형에 의한 장기간 유출량의 발생이 필수적이며 수자원 시스템의 적정 갈수재현기간의 선정이 대단히 중요함을 시사해 주는 것이다.

• 한국물환경학회지
• /
• 제25권1호
• /
• pp.58-68
• /
• 2009

Low impact development (LID) technique is relatively new concept to reduce surface runoff and pollutant loading from land cover by attempting to match predevelopment condition with various integrated management practices (IMPs). In this study, computational model for designing and evaluating LID, named LIDMOD, was developed based on SCS-CN method and applied at Andong bus terminal to evaluate LID applicapability and design retention/detention area for volume or peak flow control. LIDMOD simulated with 21 years simulation period that yearly surface runoff by post-development without LID was significantly higher than that with LID showing about 2.8 times and LID could reduce efficiently yearly surface runoff with 75% reduction of increased runoff by conventional post development. LIDMOD designed detention area for volume/peak flow control with 20.2% of total area by hybrid design. LID can also efficiently reduce pollutant load from land cover. Pollutant loads from post-development without LID was much higher than those from pre-development with showing 37 times for BOD, 2 times for TN, and 9 times for TP. Pollutant loads from post-development with LID represented about 57% of those without LID. Increasing groundwater recharge reducing cooling and heating fee, creating green refuge at building area can be considered as additional benefits of LID. At the point of reducing runoff and pollutant load, LID might be important technique for Korean TMDL and LIDMOD can be useful tool to calculate unit load for the case of LID application.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.972-978
• /
• 2009

This study modifies the present total maximum daily load (TMDL) system of Ministry of Environment and applies to the Anyangcheon watershed. Hydrologic Simulation Program-FORTRAN (HSPF) model is used to simulate both runoff and non-point source pollution, simultaneously, instead of QUAL2E. The drought flow (355th daily flow) is proposed for the target water quantity since it is easier to satisfy low flow (275th daily flow) for the target water quality than drought flow. The increase of discharge is more than the increase of pollutant load except for the period under low flow. The measured unit loads for non-point source are used to consider the regional runoff characteristics. The measured water quantity and quality data are used since the ministry of environment supports only water quality. This analysis results show some reasons for the improvement of the present TMDL system of Korea.

• Environmental Engineering Research
• /
• 제15권3호
• /
• pp.167-172
• /
• 2010

The effects of low impact development (LID) techniques, such as green roofs and porous pavements, on the runoff and pollutant load from an apartment complex were simulated using the Site Evaluation Tool (SET). The study site was the Olympic Village, a preexisting apartment complex in Seoul, South Korea, which has a high percentage of impervious surfaces (approximately 72% of the total area). Using the SET, the effects of replacing parking lots, sidewalks and driveways (37.5% of the total area) having porous pavements and rooftops (14.5% of the total area) with green roofs were simulated. The simulation results indicated that LID techniques reduced the surface runoff, and peak flow and pollutant load, and increased the evapotranspiration and soil infiltration of precipitation. Per unit area, the green roofs were better than the porous pavements at reducing the surface runoff and pollutant loads, while the porous pavements were better than green roofs at enhancing the infiltration to soil. This study showed that LID methods can be useful for urban stormwater management and that the SET is a useful tool for evaluating the effects of LID on urban hydrology and pollutant loads from various land covers.

• 물과 미래
• /
• 제28권2호
• /
• pp.125-136
• /
• 1995

본 연구의 목적은 탱크모형의 매개변수를 시행착오범으로 산정할 경우, 불확실성을 개선하기 위해 Kalman filter로 매개변수를 실시간 예측하여 저수유출의 예측에 효과적인 알고리즘을 얻고자 하였다. 유역특성을 다양한 구조로 나타낼 수 있는 탱크모형은 각 단 탱크에 부착된 유출공으로부터 유출한 총 유출량이 관측유량에 유사하게 나타나야 하지만 유출환경의 영향으로 수렴성이 좋지 않았다. 이러한을 보완하기 위하여 탱크모형의 매개변수를 Kalman filter의 상태공간 모형에 의하여 실시간으로 추정한 결과, 시간 경과에 따라 추정치와 관측치의 수렴도가 높아 일정한 값을 유지하였으며, 이때의 유출환경을 나타내는 상태공간의 매개변수변화가 정적임을 알 수 있었다. 따라서 Kalman filter에 의한 탱크모형의 매개변수 추정기법은 저수유출 예측에 특히 효율성이 좋았으며 유량이 급변하는 곳에서도 어느 정도 적응하여 기존 탱크모형의 구조를 자동기법으로 정하는 예측시스템 보다 유출예측 시스템에 의한 탱크모형의 구조적 알고리즘이 적합한 모형임을 입증하였다.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.691-701
• /
• 2010

As the water-cycle is transformed by increasing of the impermeable area in process of urbanization, decentralized rainwater management facilities(infiltration, harvesting and retention facilities) as source control are considered to be a method of restoring water-cycle of urban and reducing runoff. SWMM model was used to analyse the change of water-cycle structure before and after development in A new town watershed. Modified SWMM code was developed to apply infiltration facilities. The modified SWMM was used to analyse the change of water-cycle before and after infiltration trench setup in AJ subcatchment. Changes of the impervious area by development and consequent increase in runoff were analyzed. These analyses were performed by a day rainfall during ten years from 1998 to 2007. According to the results, surface runoff increased from 51.85% to 65.25 %, and total infiltration volume decreased from 34.15 % to 21.08 % in A newtown watershed. If more than 80 infiltration trenches are constructed in AJ subcatchment, the low flow and the drought flow increases by around 47%, 44%, separately. The results of this study, infiltration trench is interpreted to be an effective infiltration facility to restore water-cycle in new town.

• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.407-416
• /
• 2016

본 연구에서는 미계측 유역의 평균갈수량 추정을 위한 지역회귀모형을 개발하고자 하였다. 12개 다목적댐과 4개의 용수댐에서 관측된 조절되지 않은 유입량 자료로부터 평균갈수량을 산정하였고, 이를 유역면적, 유역경사, 유역밀도, 연평균강수량, 유출곡선지수 등의 유역특성인자와의 상관분석을 통해 다양한 형태의 지역회귀모형을 개발하였다. 평균갈수량의 관측값과 추정값의 비교를 통해 각 회귀모형의 성능을 평가하였고, 유역면적, 연평균강수량, 유출곡선지수를 설명변량으로 하는 회귀모형이 가장 우수한 성능을 보였다. 또한 비유량법과 기존에 개발된 기존회귀모형과의 비교를 통해서 본 연구에서 개발한 모형의 적용성이 가장 우수한 것으로 분석되었다.