• 제목/요약/키워드: low-distortion

검색결과 892건 처리시간 0.02초

LDPM 영상 평가를 활용한 동영상 스티칭의 시차 왜곡 검출 및 정정 방법 (Parallax Distortion Detection and Correction Method for Video Stitching by using LDPM Image Assessment)

  • 이성배;강전호;김규헌
    • 방송공학회논문지
    • /
    • 제25권5호
    • /
    • pp.685-697
    • /
    • 2020
  • 파노라마(Panorama) 및 360도 영상과 같은 몰입형(Immersive) 미디어 영상은 영상 내 공간을 사용자가 직접 방문한 것 같은 현장감을 제공해야하므로 실제 세계의 모습을 사실 그대로 나타낼 수 있어야 한다. 그러나 파노라마 및 360도 영상에서는 촬영 카메라들간의 시차(Parallax)로 인해 사물이 사라지거나 중복해서 나타나는 현상이 나타나며, 이와 같은 시차 왜곡은 사용자의 콘텐츠 몰입을 방해할 수 있다. 이에 따라서, 시차 왜곡을 극복하기 위한 많은 동영상 스티칭 알고리즘이 제안되고 있지만, Object detection 모듈의 낮은 성능과 Seam 생성 방식 등의 제한으로 여전히 시차 왜곡이 발생하고 있다. 이에 본 논문에서는 기존 동영상 스티칭 기술의 제한 사항을 분석하고, 해당 동영상 스티칭 기술의 제한을 극복하기 위하여 LDPM(Local Differential Pixel Mean) 영상 평가를 활용한 동영상 스티칭의 시차 왜곡 검출 및 정정 방법을 제안한다.

노광 광학계의 왜곡수차 측정에 관한 연구 (Direct Measurement of Distortion of Optical System of Lithography)

  • 주원돈;이지훈;채성민;김혜정;정미숙
    • 한국광학회지
    • /
    • 제23권3호
    • /
    • pp.97-102
    • /
    • 2012
  • 일반적으로 왜곡을 측정하는 방법으로 패턴의 전체 이미지를 분석하여 왜곡을 평가하는 방법을 이용하고 있으나 정확도가 높지 않아 카메라 등의 광학계에 많이 적용되고 있다. 1um이하의 정확도를 요구하는 왜곡수차를 측정하는 방법으로는 고가의 정밀 스테이지를 이용하여 마스크의 이미지 위치를 정확히 측정하는 방법이 주로 이용된다. 본 논문에서는 정확도가 요구되지 않는 매뉴얼 스테이지를 이용하여 왜곡을 정확히 측정하는 방법을 연구 하였다. 주요 아이디어로는 CCD나 CMOS를 이용하여 마스크 이미지를 일부 중첩되도록 분할측정하고 인접중첩영역의 이미지를 통합하여 마스크 이미지 위치를 정확히 계산하는 것이다. 마스크 이미지의 정확한 위치정보를 얻기 위해 Canny Edge Detection 기법을 사용하였으며 이렇게 확보된 위치정보로부터 좌표변환과 최소자승법을 사용하여 정확한 왜곡수차를 계산하는 과정을 연구하였다.

Off-Site Distortion and Color Compensation of Underwater Archaeological Images Photographed in the Very Turbid Yellow Sea

  • Jung, Young-Hwa;Kim, Gyuho;Yoo, Woo Sik
    • 보존과학회지
    • /
    • 제38권1호
    • /
    • pp.14-32
    • /
    • 2022
  • Underwater photographing and image recording are essential for pre-excavation survey and during excavation in underwater archaeology. Unlike photographing on land, all underwater images suffer various quality degradations such as shape distortions, color shift, blur, low contrast, high noise levels and so on. Outcome is very often heavily photographing equipment and photographer dependent. Excavation schedule, weather conditions, and water conditions can put burdens on divers. Usable images are very limited compared to the efforts. In underwater archaeological study in very turbid water such as in the Yellow Sea (between mainland China and the Korean peninsula), underwater photographing is very challenging. In this study, off-site image distortion and color compensation techniques using an image processing/analysis software is investigated as an alternative image quality enhancement method. As sample images, photographs taken during the excavation of 800-year-old Taean Mado Shipwrecks in the Yellow Sea in 2008-2010 were mainly used. Significant enhancement in distortion and color compensation of archived images were obtained by simple post image processing using image processing/analysis software (PicMan) customized for given view ports, lenses and cameras with and without optical axis offsets. Post image processing is found to be very effective in distortion and color compensation of both recent and archived images from various photographing equipment models and configurations. Merits and demerit of in-situ, distortion and color compensated photographing with sophisticated equipment and conventional photographing equipment, which requires post image processing, are compared.

Feed-forward 선형화 방식을 적용한 송신 시스템 설계 (Application of Feed-forward Linearization Method to A Transmitter System)

  • 김경태;김상규
    • 한국음향학회지
    • /
    • 제23권4호
    • /
    • pp.303-308
    • /
    • 2004
  • 본 논문에서는 전력 증폭기의 선형화를 위해 제안된 feed-forward 선형화 방식을 IMT-2000용 송신 시스템에 적용한 새로운 송신 시스템 구조를 제안한다. 이 시스템에서 feed-forward 구조는 왜곡 성분을 비교하고 제거하기 위해 보조신호(reference signal)을 필요로 하는데, 이 보조신호는 무시할 정도로 낮은 왜곡을 갖도록 낮은 입력 동작 범위에서 동작하는 두 번째 변조기에서 만들어 진다. 이런 구조로 한 결과송신 시스템에서 증폭기뿐만 아니라 변조기의 왜곡을 줄일 수 있다는 큰 장점이 있다. 본 논문의 시스템은 Agilent 社의 EEsoft ADS ver.2002를 사용하여 설계하였으며, 입력은 1.98GHz 주파수 대역에서 2MHz의 주파수 간격을 갖는 2-tone으로 하였고, 약 49.95dB의 IMD 개선 특성을 얻어, 본 논문에서 제안하는 시스템은 간단함과 선형성을 동시에 제공할 수 있다는 것을 입증하였다.

Relationship between Accrual Anomaly and Stock Return: The Case of Vietnam

  • DANG, Hung Ngoc;TRAN, Dung Manh
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제6권4호
    • /
    • pp.19-26
    • /
    • 2019
  • The study investigates the impact of accrual anomaly on stock return ratio of listed firms in Vietnam. Data were collected from listed firms for the period from 2008 to 2018. To learn about the causes of accrual anomaly in returns and future rate of returns on the Vietnamese stock market, this research is based on accrual analysis of Richardson, Sloan, Soliman, and Tuna (2006) on growth and effective components. We employ GLS regression model for examining the impact of accrual anomaly on stock return ratio and T-test for checking the difference between the lowest and the highest portfolio. The results show that accounting distortion is the main factor impacting the stock return, not growth determinant. Both two determinants of accounting distortion and growth contribute the explanation of the impact of accrual anomaly on profit and future stock return ratio. Experimental evidence confirms an abnormal existence of accrual in the Vietnam stock market. Aggregate accrual is negatively correlated with future operating profit and future stock return. However, after considering the factors contributing to the impact of future profitability and return on stock returns, the study results show that accounting distortion can account for low sustainability of income that is not growth.

완전 디지털 오디오 증폭기를 위한 보간 필터 설계 (An Interpolation Filter Design for the Full Digital Audio Amplifier)

  • 허서원;성혁기
    • 한국정보통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.253-258
    • /
    • 2012
  • 자연 샘플링 펄스폭 변조 방식을 디지털 영역에서 적용하기 위해서는 왜곡성능이 우수하고 계산 량이 적은 보간 필터가 필수적이다. 이를 위하여 본 논문에서는 변형된 패로우 구조를 기반으로 한 새로운 형태의 보간 필터를 제안 및 설계한다. 제안된 필터는 아날로그 신호 추정을 위해 단지 4개의 주변 샘플 값만을 필요로 하는 단순화된 구조를 가지므로 기존의 라그랑지 보간 필터와 비슷한 복잡도를 유지하면서 더 우수한 통과 대역 왜곡 특성을 보인다. 설계된 보간 필터를 이용하여 20 kHz 의 가청 주파수 대역에서 10-3 dB 의 최대 왜곡 편차를 달성하여 기존의 라그랑지 보간 방식과 비교하여 1/6 정도 감소된 최대 왜곡 편차 특성을 실현하였다.

Voltage Feedforward Control with Time-Delay Compensation for Grid-Connected Converters

  • Yang, Shude;Tong, Xiangqian
    • Journal of Power Electronics
    • /
    • 제16권5호
    • /
    • pp.1833-1842
    • /
    • 2016
  • In grid-connected converter control, grid voltage feedforward is usually introduced to suppress the influence of grid voltage distortion on the converter's grid-side AC current. However, owing to the time-delay in control systems, the suppression effect of the grid voltage distortion is seriously affected. In this paper, the positive effects of the grid voltage feedforward control are analyzed in detail, and the time-delay caused by the low-pass filter (LPF) in the voltage filtering circuits and digital control are summarized. In order to reduce the time-delay effect on the performance of the feedforward control, a voltage feedforward control strategy with time-delay compensation is proposed, in which, a leading correction of the feedforward voltage is used. The optimal leading step used in this strategy is derived from analyzing the phase-frequency characteristics of a LPF and the implementation of digital control. By using the optimal leading step, the delay in the feedforward path can be further counteracted so that the performance of the feedforward control in terms of suppressing the influence of grid voltage distortion on the converter output current can be improved. The validity of the proposed method is verified through simulation and experiment results.

경사진 기계평면시일의 변형거동 특성 해석 (Analysis characters of distortion of inclined mechanical face seal)

  • 조승현;고영배;김청균
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제34회 추계학술대회 개최
    • /
    • pp.341-349
    • /
    • 2001
  • Heat distortion of the non-contacting mechanical face seal is affected by friction heat between primary seal and seal sheet. The fluid or gas in mechanical face seal maintains operating gap, cooling friction heat and lubricates at the face of seal. So we designed face of seal for inclined face. inclined face of seal improves fluid or gas flow at the face of seal and it increases circumferential velocity at outer radius of the seal so temperature of the seal is decreased by low heat transfer coefficient at there. In this paper, inclined face seal are analysed numerically using finite element method for proof improve inclined face seal performance. Angle of the incline face used for FEA is from 50$^{\circ}$to 90$^{\circ}$and for explaining the effects of inclined face in seal, we get temperature, face distortion, and stress in the seal with variable operating gap and rotating speeds. Result of analysis shows that angle of the incline face is 60$^{\circ}$come to good thermal distortion characteristics.

  • PDF

High Performance Piezoelectric Microspeakers and Thin Speaker Array System

  • Kim, Hye-Jin;Koo, Kun-Mo;Lee, Sung-Q;Park, Kang-Ho;Kim, Jong-Dae
    • ETRI Journal
    • /
    • 제31권6호
    • /
    • pp.680-687
    • /
    • 2009
  • This paper reports on an improved piezoelectric microspeaker with a high sound pressure level of 90 dB, a total harmonic distortion of less than 15%, and coherence higher than 0.9. The fabricated Pb(Zr,Ti)$O_3$ (PZT) microspeakers have a thickness of only 1 mm including the speaker frame and an active area of 18 mm${\times}$20 mm. To achieve higher sound pressure and lower distortion, the PZT piezoelectric microspeaker has a well-designed speaker frame and a piezoelectric diaphragm consisting of a tilted PZT membrane and silicone buffer layer. From the simulation and measurement results, we confirmed that the silicon buffer layer can lower the first resonant frequency, which enhances the microspeaker's sound pressure at a low frequency range and can also reduce useless distortion generated by the harmonics. The fabricated PZT piezoelectric microspeakers are implemented on a multichannel speaker array system for personal acoustical space generation. The output sound pressure at a 30 cm distance away from the center of the speaker line array is 15 dB higher than the sound pressure at the neighboring region 30 degrees from the vertical axis.

New Generalized PWM Schemes for Multilevel Inverters Providing Zero Common-Mode Voltage and Low Current Distortion

  • Nguyen, Nho-Van;Nguyen, Tam-Khanh Tu
    • Journal of Power Electronics
    • /
    • 제19권4호
    • /
    • pp.907-921
    • /
    • 2019
  • This paper presents two advanced hybrid pulse-width modulation (PWM) strategies for multilevel inverters (MLIs) that provide both common-mode voltage (CMV) elimination and current ripple reduction. The first PWM utilizes sequences that apply one switching state at the double ends of a half-carrier cycle. The second PWM combines the advantages of the former and an existing four-state PWM. Analyses of the harmonic characteristics of the two groups of switching sequences based on a general switching voltage model are carried out, and algorithms to optimize the current ripple are proposed. These methods are simple and can be implemented online for general n-level inverters. Using a three-level NPC inverter and a five-level CHB inverter, good performances in terms of the root mean square current ripple are obtained with the proposed PWM schemes as indicated through improved harmonic distortion factors when compared to existing schemes in almost the entire region of the modulation index. This also leads to a significant reduction in the current total harmonic distortion. Simulation and experimental results are provided to verify the effectiveness of the proposed PWM methods.