• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.407-416
• /
• 2016

The purpose of this study is to develop regional regression models to estimate mean low flow for ungauged basins. The unregulated streamflow data observed at 12 multipurpose dams and 4 irrigation dams were analyzed for determining mean low flows. Various types of regression models were developed using the relationship between mean low flows and various sets of watershed characteristics such as drainage area, average slope, drainage density, mean annual precipitation, runoff curve number. The performance of each regression model for estimating mean low flows was assessed by comparison with the results obtained from the observed data. It was found that a regional regression model explained by drainage area, the mean annual precipitation, and runoff curve number showed the best performance. The regression model presented in this study also gives better estimates of mean low flow than the estimates by the drainage-area ratio method and the previous regression model.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2014

This study aims to investigate the effect of heat input of outside SAW weld on low temperature toughness($-20^{\circ}C$) of inside SAW weld for API 5L X70 with sour gas resistance. As increasing heat input of the outside weld, low temperature toughness of the inside weld was decreased. Especially, in spite of the same heat input, the value of low temperature toughness was fluctuated. On the basis of fracture and microstructure analysis, the low temperature toughness is correlated with the fracture area ratio of shear lips and four kinds of fracture sections. These sections were divided with size and shape of dimple correlated with grain boundary ferrite and cleavage correlated acicular and polygonal ferrite in grain. Therefore, it was seen that these sections were two of final solidification area in the inside weld and the outside weld, no reheated zone and reheated zone in the inside weld. In conclusion, it is thought that the difference of low temperature toughness at the same heat input is due to the fact that each of impact test specimens could have the different microstructure, even though the notch was machined under the error tolerance of 1mm. It is because the final solidification area of the inside weld is very narrow.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.2
• /
• pp.174-184
• /
• 2012

Objectives: The purpose of this study was to observe the early postpartum low back pain and pelvic girdle pain in the Korean medical hospital for 2-weeks. Methods: Fifty-one postpartum women who admitted for postpartum care in Korean hospital from December 3rd, 2011 to January 31st, 2012 had written out pain measurement questionnaires(SF-MPQ, VAS, ODI) three times for 2-weeks. SPSS 18.0 for Windows was used to analyse the data and the independent samples t-test, paired T-test were used to verify the results. Results: 1. Evaluation of low back pain within the first week after birth was as follows: SF-MPQ sensory area was $5.06{\pm}4.41$ points; SF-MPQ emotional areas was $0.86{\pm}1.34$ points; VAS mean was $3.79{\pm}2.02$ points; and ODI mean was $10.27{\pm}6.69$. 2. Early postpartum low back pain and pelvic girdle pain were significantly decreased in SF-MPQ, VAS, and ODI after 2-weeks(p < 0.01). 3. Age, birth type, parity, weight, and BMI increased during pregnancy does not affect the postpartum low back pain and pelvic girdle pain. Conclusions: The top 10% of postpartum low back pain scale was 10.8 points or more in the sensory area of SF-MPQ, and 3 points or more in the affective area of SF-MPQ. In the case of VAS, it was more than 7 points, and ODI was more than 21.8 points. Postpartum back pain with oriental medical treatment was significantly improved.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.33-46
• /
• 2008

This paper presents the experimental results of a low-power low-cost RF transceiver for the 915 MHz band IEEE 802.15.4b standard. Low power and low cost are achieved by optimizing the transceiver architecture and circuit design techniques. The proposed transceiver shares the analog baseband section for both receive and transmit modes to reduce the silicon area. The RF transceiver consumes 11.2 mA in receive mode and 22.5 mA in transmit mode under a supply voltage of 1.8 V, in which 5 mA of quadrature voltage controlled oscillator is included. The proposed transceiver is implemented in a 0.18 ${\mu}m$ CMOS process and occupies 10 $mm^2$ of silicon area.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.449-459
• /
• 2015

The depth of low permeable layer in Jeju Island was analyzed using the geologic columnar section data. The highest low permeable layer was found in center of Mt. Halla and the deepest area was in eastern part of Jeju Island. The study area, Seongsan watershed, is located in the eastern part of Jeju where the low permeable layer showing deep in a northward direction. Based on this analysis, the MODFLOW modeling was performed for groundwater flow of Seongsan watershed. The boundary of Seongsan watershed was set up as a no-flow and the modeling result showed the difference -0.26~0.62 m compared to the observed groundwater level. Meanwhile, MODFLOW model results considering low permeable layer showed -0.26~0.36 m differences compared to groundwater level and indicated more accurate than no-flow method result. Therefore, to interpret the groundwater flow over Seongsan watershed, comprehensive consideration including the low permeable layer distribution below the basalt layer is needed.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.6
• /
• pp.461-470
• /
• 2021

Objectives: The objective of this study was to determine the prevalence of low physical activity (PA) in Peruvian adults and to identify associated factors. Methods: An analytical study was performed using data from the 2017-2018 Nutritional Food Surveillance by Life Stages survey. The outcome variable was low PA (yes or no), assessed using the International Physical Activity Questionnaire-short form. Prevalence ratios were estimated as a measure of association. Results: Among the 1045 persons included in the analysis, the age-standardized prevalence of low PA was 61.9%. The adjusted model showed that being female and migrating from a rural to an urban area in the last 5 years were associated with a higher probability of having low PA than males and individuals who had not migrated, while residing in rural highlands and jungle areas was associated with a reduced probability of having low PA compared to people residing in other geographic domains. Conclusions: Being a female and migration from a rural to an urban area in the last 5 years were associated with a higher likelihood of having low PA. Therefore, promotion and prevention strategies related to PA are required, especially in the female and migrant populations.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.138-150
• /
• 2003

In the mid-west coast of Korea where Mankyung and Dongjin rivers discharge fresh water, Saemangeum tidal dyke of 33 km long is under construction to reclaim the very shallow estuary region of 41,000ha. Main source of freshwater in this coastal area is Keum River locating closely north of the dyke. At present, the dyke connected with Gogunsan-Gundo separates this area into three regions; northwestern, southwestern and eastern (Saemangeum) region of the dyke, and the water in Saemangeum region is exchanged through one gap in the northern dyke and two gaps in the southern dyke. We have observed distributions and structures of temperature and salinity to examine the summer circulation related with low-salinity water in this coastal area in 1998 and 1999. In the surface layer off the northern dyke a tongue-like distribution of low-salinity extends 60 km long from Keum River estuary mouth to the northwest, forming plume front bounded by offshore water. In the inner region of Saemangeum dykes salinity distributions show that two river waters are merged together and the low salinity water is deflected toward northern gap of the dyke. In the surface layer off the southern dyke we observed small tongue-like distribution of another low-salinity water extending to the north from Gomso Bay. Based on the analysis of distributions of low-salinity water and frontal structures, we can suggest an anticlockwise circulation of coastal water around the dyke, composed by the estuarine water outgoing from the inner region of the dyke through the northern dyke's gap and the inflow through two gaps of southern dyke from offshore. After completing the dyke construction, this coastal circulation around the dyke will be, however, changed because fresh water discharge of Mankyung and Dongjin rivers will be routed artificially and directly into the area offshore of the southern dyke.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.735-736
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.167-168
• /
• 2009

The noise sources in ship and offshore structure have an influence on adjacent receiving area through a partition between noise sources and receiving area. The partition in ship is usually made of stiffened plate. Sound transmission loss (STL) of the partition at high frequency could be improved by additional installation of insulation or wall panel. At low frequency, however, it is very difficult and needs an increase of plate thickness which causes a considerable weight increase of ship. In this paper, we have investigated the effect of the bulkhead boundary condition. From measurement result, we found that the bulkhead boundary condition can affect a lot in STL, especially at low frequency range. Finally, we get the 5dB increase in STL through the modification of boundary condition.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.61-66
• /
• 1997

In this paper we report the fabrication of an InGaAs metal-semiconductor-metal (MSM) photodiode(PD) which an InAlAs barrier enhancement layer that has very low dark current and high speed chracteristics. The detector using Cr/Au schottky metal fingers with 4um spacing on a large active area of 300*300um$^{2}$ offers a low dark current of 38nA at 10V, a low capacitance of 0.8pF, and a high 3-dB bandwidth of 2.4 GHz. To our knowledge, these characteristics are better than any previously published results obtained from large area InGaAs MSM PD's. The RC equivalent model and frequency domain current response model considering transit time were also used to analyze the frequency characteristic of the fabricated device.