• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.226-231
• /
• 2001

The purpose of this paper is to propose the experimental method of thermal properties of Phase Change Materials (PCMs) by using T-history method. As far, in order to measure the heat of fusion and specific heat of PCMs, conventional thermal analysis methods such as DSC and DTA have been used. Because these methods test very small samples, thermal properties of samples are usually different from those of materials consisting of several components. For these reasons, T-history method, the simple measurement method of the heat of fusion and specific heat of PCMs have been performed. In this paper, we investigated the thermal properties of low temperature PCMs(below $0^{\circ}C$) under the charging process by using T-history method. The results are compared to those of DSC method. The T-history method will be useful for selection of the best PCM from lots of candidates and development of new PCMs.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권4호
• /
• pp.206-213
• /
• 2004

Cycle test for developed phase change material (PCM) is necessary in order to assess the variation of latent heat, which decreases with time by deterioration. T-history method and measurement using heat-flux meter are appropriate for the cycle test in a tube filled with PCM because they do not need an extraction of sample in measuring heat of fusion. In the present study, these methods were applied to a PCM having a melting point below a room temperature, different to the past studies for PCMs melting above a room temperature. As a result of experiment using pure water as specimen, we can obtained rea-sonable values for heat of fusion.

• 청정기술
• /
• 제23권3호
• /
• pp.325-330
• /
• 2017

This study presents the preparation of n-tetradecane-in-water emulsions with different weight ratios of n-tetradecane and water, and their potential application in packaging and shipping vaccines. The size and distribution of the n-tetradecane droplets are characterized using optical microscopy and light scattering methods, respectively. The thermal properties of the emulsions are determined using the T-history method. In the results, the emulsions, which are comprised of 17 ~ 30 wt% oil, 3 wt% surfactant, and 67 ~ 80 wt% water, are stable and have droplet sizes in the range of 100 to 800 nm. The thermal properties demonstrate that subcooling is prevented through increasing the droplet size. The results indicate that the n-tetradecane/water emulsions containing 25 ~ 35 wt% n-tetradecane, with a melting point of $2{\sim}8^{\circ}C$ and a latent heat of $227.0{\sim}250.8kJ\;kg^{-1}$, are good candidate materials for packaging and shipping vaccines.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.18-21
• /
• 2009

높은 열하중하에 있는 부품의 수명은 일반적으로 다른 부품에 비해 짧은 수명을 가지고 있다. 액체 로켓의 터보펌프 터빈은 작동시간 동안 높은 회전속도로 인한 높은 원심력과 높은 온도와 같은 환경하에서 작동된다. 이와 같은 환경은 터보펌프 터빈의 저주기 피로를 야기한다. 우선 열응력을 해석하기 위해 ABAQUS/CAE가 사용되었으며 탄성변형률과 소성변형률을 고려하기 위해 Coffin-Manson 방정식을 사용하였다. 평균응력의 변화를 고려하기 위해 S.W.T법을 사용하였으며, 열응력해석 결과로 얻어진 변형률 이력을 이용하여 터보펌프 터빈의 취약지점에 저주기피로해석을 수행하였다. 본 연구에서는 저주기 수명을 해석하기 위해 변형룰 수명 방법이 적용되었다.

• 대한한방체열의학회지
• /
• 제6권1호
• /
• pp.23-31
• /
• 2008

Objective: The purpose of this study is to identify relationship between the PWV and the temperature difference. Methods: When it comes to senile patients who suffer from cold limbs, there is need to see whether or not the patient's low temperature of the limbs is do to arteriosclerosis. The Pulse Wave Velocity(PWV) is a non-invasive method measuring the artery's rigidness. And the Digital Infrared Thermal Imaging(D.I.T.I) is a non-invasive method to see the body's thermal change. Research on the interrelationship of the artery's rigidness and body's thermal distribution was done by using these two tests. The subjects of this research were patients between the age 40~65 who have done both the D.I.T.I and PWV in March 2005~ September 2005. They had to have no history of diabetes, coronary illnesses or cerebrovascular diseases which are diseases that can effect the outcome of the PVW, nor history of spondylopathy or dermatosis which can effect the outcome of the D.I.T.I. Results: The results were as follows. 1. There was a significant interrelationship between the right wrist-ankle PWV and the temperature difference of the right wrist-palm. 2. There was a significant interrelationship between the left wrist-ankle PWV and the temperature difference of the left wrist-palm. 3. There was no significant interrelationship between the right wrist-ankle PWV and the temperature difference of the right thigh-dorsum of foot. 4. There was no significant interrelationship between the left wrist-ankle PWV and the temperature difference of the left thigh-dorsum of foot. 5. The right ABI showed no significant interrelationship between the temperature difference of the right wrist-palm and the right thigh-dorsum of foot. 6. The left ABI showed no significant interrelationship between the temperature difference of the left wrist-palm and the left thigh-dorsum of foot. Conclusion: The study shows that there was a significant interrelationship between wrist-ankle PWV and the temperature difference of wrist-palm.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.297-306
• /
• 2004

This study investigated Austenite Grain Size (AGS) distribution in Low-Speed Round-Oval Rolling. Rolling experiments were done along with the AGS numerical modeling to characterize the final AGS distribution and its kinetics behavior. For bar rolling experiment, we utilized the pilot rolling mill, operating at 34 fixed rpm, at POSCO Technical Research Laboratories. To investigate the microstructural observation, the rigid-viscoplastic finite element analysis was combined with Hodgson's AGS evolution model. To consider the transient thermal history in the integrative AGS modeling, additivity rule was introduced. The integrated analysis revealed that static or meta-dynamic recrystallization is responsible for the AGS difference in the inner or outer region of rolled bar. Comparative study showed that the current AGS modeling approach can be used to model the overall AGS distribution in bar rolling processes. For more accurate AGS prediction, the AGS modeling method should be verified under the various rolling conditions such as different rolling speeds and different deformations.

• 암석학회지
• /
• 제19권4호
• /
• pp.255-267
• /
• 2010

최근 많은 발전을 이룬 (U-Th)/He 온도-연령 측정법은 광물내의 빠른 He 확산 특성을 이용해 지각 천부의 열역사 혹은 매우 짧은 열적 교란 등을 규명하는데 널리 쓰이고 있다. 이번 논평에서는 이 방법이 어떻게 화성운석의 열역사, 특히 화성(Mars)에서 방출시의 열적교란을 규명하는데 이용될수 있는지에 대한 기존 연구 및 전망에 대해 기술하였다. 모든 화성운석은 화성에서 방출될 당시 충격변성작용을 겪은 것으로 알려져 있는데, 이러한 작용의 온도조건을 규명하기 위해 충격실험을 통한 암석 조직 비교, 고지자기학적 연구, $^{40}Ar/^{39}Ar$ 및 (U-Th)/He 온도-연령측정법 등이 이용되었다. 각각의 방법은 장단점이 있으며 열역사를 밝히는데 단편적인 정보만을 제공하지만, 이러한 다양한 방법들이 동시에 적용되었을때 보다 신빙성있는 열역사를 알아낼 수 있다. ALH84001 화성운석의 경우 화성에서 방출될 당시의 조건에 대해 논란이 많은데 이는 위에 언급한 방법들로부터 서로 상반된 결론이 도출되었기 때문이다. 최근 단입자 (U-Th)/He 및 $^{40}Ar/^{39}Ar$ 결과를 동시에 만족하는 열역사를 규명한 연구가 ALH84001 화성운석에 대해 이루어 졌는데, 이는 앞으로의 운석 연구에 좋은 방법론을 제시할 수 있으리라 본다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• 암석학회지
• /
• 제23권3호
• /
• pp.239-247
• /
• 2014

(U-Th)/He 연령측정법은 자연상에 존재하는 $^{238}U$, $^{235}U$ 및 $^{232}Th$이 붕괴할 때 알파 입자($^4He$ 원자)가 형성되는 현상을 이용한 연령측정법이다. 모 동위원소인 $^{238}U$, $^{235}U$ 및 $^{232}Th$과 붕괴산물인 $^4He$의 양을 측정하여 (U-Th)/He 연령을 구할 수 있다. 이렇게 형성된 $^4He$ 원자는 대부분의 지질학적 시료내에서 비교적 저온에서도 빠르게 확산되는데, 이는 $^4He$가 불활성 기체이고 다른 원소에 비해 작기 때문이다. 따라서 방사성 붕괴에 의한 $^4He$의 형성(ingrowth)과 확산에 의한 $^4He$의 방출(diffusive loss)이 지질학적 시간동안 어떻게 진행 되었느냐에 따라 현재 남아있는 $^4He$의 양이 결정된다. 예를 들어, 인회석내에서의 He 확산은 다른 광물에 비해 빨라서, 비교적 저온인 $80^{\circ}C$에서도 He이 빠르게 인회석 밖으로 방출되는 것으로 알려져 있다. 자연상의 온도조건이 약 $40^{\circ}C$ 이하로 떨어졌을 때 비로소 인회석내 He 확산이 충분히 느려져서 대부분의 He이 인회석내에 보존된다. 따라서 (U-Th)/He 연령은 시료가 $80-40^{\circ}C$를 통과한 시기를 지시한다. 자연상에서 이러한 온도범위에 해당하는 깊이를 "부분 보존대"(partial retention zone)의라 한다. 전통적으로 흔히 쓰이는 폐쇄온도(closure temperature)는 보통의 입자크기와 냉각속도에서, 인회석 경우 약 $60-70^{\circ}C$, 저어콘 및 티탄석의 경우 약 $200^{\circ}C$로 알려져 있다. 특히 인회석의 He 폐쇄온도는 다른 열역사 측정법에 비해 다소 낮기 때문에 비교적 최근의 열역사 또는 천부에서의 지각융기 현상을 기술하는데 매우 유용하게 쓰일 수 있다.