• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.240-247
• /
• 1983

Heritability of flowering date, length of main stem, weight of 100 grains and number of shells per square meter in peanut were high with low local variation. There was positive genotypic correlation between length of main stem and yield, No. of shells per square meter and matured seed ratio, No of shells per square meter and yield 100 grain weight and yield but was negative genotypic correlation between flowering date and yield. With the view of path-coefficients, length of main stem, number of shells per square meter showed highly direct effects at.. all locations.

• Steel and Composite Structures
• /
• v.22 no.4
• /
• pp.875-888
• /
• 2016

The proper selection of materials for the intended use of the structural member is of particular interest. The paper deals with determining both the mechanical properties at different temperatures and the behavior in tensile creep as well as fatigue testing of tensile stressed specimens made of low alloy 42CrMo4 steel delivered as annealed and cold drawn. This steel is usually used in engineering practice in design of statically and dynamically stressed components. Displayed engineering stress - strain diagrams indicate the mechanical properties, creep curves indicate the material creep behavior while experimental investigations of fatigue may ensure the fatigue limit determination for considered stress ratio. Also, hardness testing provides an insight into material resistance to plastic deformation. Experimentally obtained results regarding material properties were: tensile strength (735 MPa / $20^{\circ}C$, 105 MPa / $680^{\circ}C$), yield strength (593 MPa / $20^{\circ}C$, 76 MPa / $680^{\circ}C$). Fatigue limit in the amount of 532.26 MPa, as maximum stress at stress ratio R = 0.25 at ambient temperature was calculated on the basis of experimentally obtained results. Regarding the creep resistance it is visible that this steel can be treated as creep resistant at high temperatures (including $580^{\circ}C$) when applied stress is of low level (till 0.2 of yield stress).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.780-790
• /
• 1997

In this study, the stress-strain relations of steels have been calculated as a function of microstructural morphologies of each phase by use of FEM program(i.e. ABAQUS). The mechanical behavior of low carbon steels is affected by the microstructural factors such as yield ratio, volume fraction, shape and distribution of each phase and so on. The effects of shape, volume fraction and yield ratio of each phase on the mechanical behavior were analyzed by using unit cell and whole specimen size models. Results obtained are summarized as follows. As the yield ratio of hard phase to that of soft phase and volume fraction of hard phase were increased, stress level of flow curves were increased. It was found that in whole specimen size model, as the particle size was decreased, higher stress level was shown. Lastly the relationship between microstructure and tensile properties was examined by using the steels with various microstructural morphologies.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.538-544
• /
• 2022

One of the most exciting areas for the development of alternative fuels is the production of biodiesel. To reduce the cost of biodiesel production, in situ trans-esterification has been introduced to simplify the production process by enabling extraction and trans-esterification to occur at a single stage in the presence of a catalyst. In this study, we investigated the feasibility of using non-corrosive and environmentally receptive flying jet plasma as an alternative catalytic route for in situ tran-sesterification of castor bean seeds (CBS). Upon optimizing the reaction conditions, it is elucidated that applying a low ratio of methanol to seeds (≤6:1) has resulted in hindering the in situ trans-esterification and leading to insignificant conversion. The yield of esters has increased from 80.5% to 91.7% as the molar ratio rose from 9:1 to 12:1. Excess alcohol beyond the ratio of 15:1 was shown to have a negative impact on the yield of the produced esters, attributed to an increase in the biodiesel portion prone to dissolving in the co-product (glycerol). An increase in the reaction bulk temperature from 40 to 55 ℃ led to a higher ester content by 50%. Further increases in the bulk temperature beyond 55 ℃ did not affect yields. Regarding the reaction period, the results have shown that 3 h of reaction is adequate for a higher biodiesel yield. The quality of the biodiesel obtained has demonstrated that all physicochemical properties meet the ASTM D6751 specifications.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.1
• /
• pp.1-9
• /
• 2013

Long term hydrogen production was investigated in an anaerobic sequencing batch reactor (ASBR) using mixed microflora. Glucose (about 8,250 mg/L) was used as a substrate for the ASBR operation under the condition of pH 5.5 and $37^{\circ}C$ with mixing at 150 rpm. The experiment was carried out over a period of 160 days. Hydrogen yield was 0.8mol $H_2/mol$ glucose with F/M ratio 2 at initial operation period. The hydrogen yield reached to maximum 2.6 mol $H_2/mol$ glucose at 80th day operation. However decreased hydrogen yield was observed after 80 days operation and eventually no hydrogen yield. Although well-known hydrogen producer Clostridium sp. was detected in the reactor by PCR-DGGE analysis, changed reactor operation was the major reason of the decreased hydrogen production, such as low F/M ratio of 0.5 and high propionic acid concentration 2,130 mg/L. Consequently the long period operation resulted in MLSS accumulation and then low F/M ration stimulating propionic acid formation which consumes hydrogen produced in the reactor.

• Journal of Mushroom
• /
• v.19 no.1
• /
• pp.71-75
• /
• 2021

We analyzed the relationship between the main chemical properties (pH, total nitrogen content, total carbon content, and CN ratio) of sterilized medium and mushroom yields in 1 kg bag culture of Pleurotus ostreatus. The mushroom yields appeared to be highly correlated with the pH, total nitrogen content, and CN ratio, and were the highest under a total nitrogen content of 2.0-2.2% and a the CN ratio of 20-22.5. However, of the three parameters, total nitrogen content showed the highest correlation with the mushroom yield. The coefficient of determination(r2) between the total nitrogen content and the sum of the yield was 0.931, while that of the pH and CN ratio was relatively low. The nitrogen content of the medium was the most important factor in determining the yield of oyster mushrooms.

• The Plant Pathology Journal
• /
• v.18 no.2
• /
• pp.68-73
• /
• 2002

The influence of fungicidal spray was assessed on powdery mildew epidemics caused by Erysiphe polygoni D.C. and on yield-attributing characters of mungbean [Vigna radiata (L.) Wilczek]. Mildew attack adversely affected the yield-attributing characters of mungbean and exhibited negative significant correlation with pod length (-0.57), pods/plant (-0.74), pod weight (-0.68), 100 seeds weight (-0.69), 100 seeds swell weight (-0.59), and seed germination (-0.71). These characters had direct or indirect effects on grain yield, which was also adversely affected due to mildew attack (-0.89). Powdery mildew was significantly retarded due to the single spray of carbendazim (0.05%) at 30-day-old crop, where the apparent rate of infection (r) was minimum at 0.0095/ unit/day and with low (11.44%) powdery mildew intensity. Other fungicides like tridemorph (0.075%) and penconazole (0.05%) were equally effective against the mildew disease where the disease intensity was less than 20% and the values of r were 0.0134 and 0.039/unit/day respectively, as compared with the control at 0.267/unit/day. Fungicide spray influenced the yield-attributing characters besides controlling the disease. Such effects were more pronounced in carbendazim (0.05%)-treated plots due to its phytotonic nature where pod length (7.59cm), pods/plant (29.75), pod weight (8.16 g), 100 grain weight (3.94 g), and swell weight of 100 seed (9.49 g) were maximum resulting to the highest yield (480 kg/ha) as compared with that of control (224 kg/ha). Spray of carbendazim also improved seed germination (74.5%). Spray of other fungicides like carbendazim with copper oxychloride in 1:1 ratio, tridemorph (0.075%), and penconazole (0.05%) was equally effective against powdery mildew of mungbean. These fungicides also exhibited positive effects on yield-attributing characters of the crop and finally increased yield. These systemic fungicides were more effective in controlling powdery mildew disease of V. radiata in the rainy season compared with wettable sulphur.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.244-250
• /
• 1999

This study aimed to analyze the effect of the change in CP class of a firm on the abnormal yield of its stock price. As a result, it was found that the change in CP class of a firm had an effect on the abnormal yield. That is. the abnormal yield rose when the class of CP rose while it dropped when the class of CP dropped. And it was analyzed that the class of CP in the firm in which its current net gain was great while it dropped in the firm in which the current net gain was small. And it was found that the CP class of the firm with the high debt to equity ratio rose when the CP class of the firm changed, whereas it rose in the firm with the low debt to equity ratio. But it was found that the size of majority shareholders equity rate in a firm, the size of corporate value of the firm, the size of cash flow of the firm and the size of the burden of financial costs of the firm were not related to the abnormal yield of its stock price. This study has its significance in analyzing the effect of the information on the change in CP class of the firm on the capital market. But it has its limitations in the sample firm and the selection of the point in time of disclosure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.287-294
• /
• 1995

This study demonstrates the influence of environmental conditions, other than iron, on pyoverdin production by fluorescent Pseudomosonas. In slightly acidic pH conditions(pH 6), cell yield was reduced while the siderophore production per cell yield was increased. The optimum temperatures for the siderophore production and cell yield was $19^{\circ}C$ and $28^{\circ}C$ for 7NSK2 and $12^{\circ}C$ and $19^{\circ}C$ for ANP15. The carbon and nitrogen balance showed that at low C : N ratio of the growth medium (higher nitrogen concentration), both cell yield and siderophore production was reduced. Use of different carbon sources revealed that citrate as a carbon source facilitated iron uptake and resulted in a significant reduction in siderophore production. However, at the late exponential phase, the iron content in the cell biomass was not significantly different from those grown in glucose or succinate. From these results it can be suggested that the environmental factors other than iron may also influence siderophore production by fluorescent pseudomonas.