• 펄프종이기술
• /
• 제44권5호
• /
• pp.54-62
• /
• 2012

The main role of surface sizing of linerboard is to improve surface and strength properties. Since surface sizing solution is applied on once dried web, substantial amount of drying energy is required. Saving of the drying energy associated with surface sizing can be made by increasing the solids content of the starch solution in size press. Therefore, it is highly desirable to develop low viscosity starches for surface sizing. A low viscosity oxidized starch was prepared and compared its effect of surface sizing with a conventional oxidised starch. Results showed increase in solids content of the starch solution decreased evaporation energy and drying time. Low viscosity starch penetrated deeper into paper and this improve various mechanical properties of linerboard.

• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.254-260
• /
• 2007

This study was examined closely physiological activation and intended to present the possibility of developing food low-fat food. Developing carbohydrate fat replacer as materials for low-fat food made of Korean potato starch, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. The calorie of starch of GPS was measured to be 3.0 kcal/g, those of chemically modified starch, HPR showed 2.5 kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with gel of starch and modified starch in constant rate through utilization of modified starch. When producing mayonnaise by substituting edible oil with gel of modified starch in 10-50%, calorie was reduced by 44${\sim}$45% when substituted by 50%, suggesting the potential of low-fat food. Measuring viscosity of mayonnaise by Brookfield viscometer, the mayonnaise with HPR showed high viscosity and the chemical modified starch group of EZ also showed high viscosity. Generally, the material property of mayonnaise tended to reduce in all measured items when oil and fat are substituted by starch substituting materials and the substituting materials increase. When it comes to the emulsification stability of mayonnaise with starch substituting materials, emulsification stability of all mayonnaise with starch substituting materials is lower than that of compared group. While the group with NL as commercial fat replacer showed emulsification stability which was slightly higher than group with modified starch and the substitution group of HPR showed higher emulsification stability. Sensory evaluation for low-fat mayonnaise by substituting oil the products substituted by modified starch was more preferred than general starch substituting products such as GPS. While NL as commercially fat replacer showed the hight preference, products with H40, EZ were also highly preferred.

• 한국식생활문화학회지
• /
• 제22권1호
• /
• pp.91-96
• /
• 2007

Developing carbohydrate fat replacer as materials for low-calorie and low-fat food made of Korean potato, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. Observing modified starch(treated in different method) by SEM, EZ(treated by enzyme) showed shape of deformed round oval, AC(treated by acetylation,), HPR(treated by hydropropylation) showed shape similar to that of NL(N-Lite), the commercial fat replacer. In the modified starch such as AC, peak in B and C type similar to those of general starch was found, but EZ showed non-crystalline shape. Compared to other modified starch, HPR, the chemically produced denatured starch showed very peculiar peak and structure in V-form. While the order of contents of amylopectin was in the order HPR > EZ > AC showed extremely high contents. Measuring the degree of gelatinization per the modified method, the degree of gelatinization of HPR as much higher than others. The water binding activity of modified starch was 240% in HPR. Measuring viscosity by producing general starch and modified starch as gel of 10% concentration, the CPS showed very high viscosity of 30.30 ${\times}$ 10$^3$ cp. Showing viscosity of 38.60, 31.60 10$^3$ ${\times}$ cp, the modified starch was in the order of HPR. While the calorie of starch of GPS was measured to be 3.0 Kcal/g, very low calorie those of chemically modified starch, HPR showed 2.5 Kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with saturated gel of starch and modified starch in constant rate through utilization of modified starch. Therefore, research and development for materials and related products which maintain the existing quality and reduce fat contents will be constantly performed in the future.

• Preventive Nutrition and Food Science
• /
• 제4권3호
• /
• pp.175-179
• /
• 1999

To develop a production method for modified starches with less pollution, pH adjustment and gamma irradiation were applied to commerical corn starch. Blue values were significantly decreased , while alkali number, optical transmittance and solubility markedly increased when gamma irradiation was applied to pH 2 adjusted corn starch. Water binding capacity and swelling power at pH 5 were the highest among the samples. Gelatinization viscosity was considerably affected by gamma irradiation and pH of the starch. Gamma irradiation of pH 2 adjusted starch showed the lowest peak viscosity and the best cooling stability among the tested samples . Therefore, the production of modified starch with low viscosity as well as with sufficient viscosity stability seems feasible by controlling the pH of the starch and gamma irrdiation.

• 한국가정과학회지
• /
• 제3권1호
• /
• pp.88-99
• /
• 2000

옥수수, 감자, 고구마 전분현탁액에 가열 전 $.$후 산을 첨가하여 pH를 4.0∼5.0으로 하였을 때 마밀로그라프에 의한 호화특성과 Brookfield 점도계로 측정한 전도 특성은 다음과 같다. 산 첨가에 따른 옥수수전분, 감자전분. 고구마전분의 아밀로그라프에 의한 특성은 가열전에 산을 첨가하였을때 호화개시온도가 대조군보다 상승되었고, 감자전분의 호화개시온도 상승이 가장 컸다. 각 전분의 점도는 pH가 낮아질수록 감소하였는데 옥수수전분의 경우 가열전 $.$후와는 관계없이 점도변화가 가장 적었다. 가열전 산을 첨가하였을 때 consistency(C-H), setback(C-P)은 증가하였고. breakdown(P-H)은 감소하였다. 가열 후 산을 첨가한 경우는 consistency(C-H), setback(C-P)은 감소하였고, breakdown(P-H)은 증가하여 가열전과 가열후 산첨가의 결과는 다르게 나타났다. 산에 의한 점도의 변화정도는 감자전분, 고구마전분, 옥수수전분 순으로 크게 변화하였다. 가열전 산을 첨가하여 일정온도까지 가열하여 Brookfield 점도계로 점도를 측정한 경우 pH가 낮을수록 점도는 전체적으로 낮게 나타났으나, 가열에 따른 냉각점도는 가열온도가 높을수록 pH의 영향에 따른 냉각점도의 감소가 뚜렷하게 나타났다. 가열 후 산을 첨가하여 냉각점도를 측정한 경우 가열전 산첨가에 비하여 옥수수전분 과 고구마전분은 전반적으로 점도가 높은 경향이었다.

• 한국식품과학회지
• /
• 제38권3호
• /
• pp.378-384
• /
• 2006

저선량의 감마선 조사(0-9.1 kGy)에 의하여 옥수수녹말의 고유 점도는 감소, 겉보기 아밀로오스 함량, 물 결합능력, 팽윤력과 용해도는 증가하였다. RVA 또는 아밀로그래프 점도는 조사선량이 증가함에 따라 감소하였으나 DSC에 의한 흡열 전이에는 큰 영향이 없었다. 감마선 조사한 옥수수 전분을 이용한 저항전분 생성은 효과가 없었다.

• 한국포장학회지
• /
• 제8권1호
• /
• pp.27-31
• /
• 2002

In this study, the physical properties of starch adhesive by temperature in carrier and main part for the Stain-Hall method were analyzed. The temperatures of starch solutions in carrier part were inversely proportional to the viscosities. The viscosities of starch solutions were maintained similarly if 2nd temperatures were same independent on the those of the 1st temperatures in carrier part. the starch solutions showed similar viscosities in all range except the viscosity of the solutions in $30^{\circ}C\;and\;40^{\circ}C$. The viscosities of starch adhesives in main part were in proportion to those of starch solutions in carrier part. The viscosities of starch adhesives in main part were maintained similarly if 2nd temperatures in carrier part were same. The viscosities of starch adhesives in main part were low when the ultimate temperature of starch solutions in carrier part were high.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.