• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.19-24
• /
• 2021

The low normal zone propagation velocity (NZPV) of high-temperature superconducting (HTS) tape leads to a quench protection problem in HTS magnet applications. To overcome this limitation, various studies were conducted on HTS coils without turn-to-turn insulation (NI coils) that can achieve self-protection. On the other hand, NI coils have some disadvantages such as slow charging and discharging time. Previously, the HTS coils with turn-to-turn insulation (INS coils) were operated in power supply (PS) driven mode, which requires physical contact with the external PS at room-temperature, not in persistent current mode. When a quench occurs in INS coils, the low NZPV delays quench detection and protection, thereby damaging the coils. However, the rotary HTS flux pump supplies the DC voltage to the superconducting circuit with INS coils in a non-contact manner, which causes the INS coils to operate in a persistent current mode, while enabling quench protection. In this paper, a new protection characteristic of HTS coils is investigated with INS coils charging through the rotary HTS flux pump. To experimentally verify the quench protection characteristic of the INS coil, we investigated the current magnitude of the superconducting circuit through a quench, which was intentionally generated by thermal disturbances in the INS coil under charging or steady state. Our results confirmed the protection characteristic of INS coils using a rotary HTS flux pump.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.2
• /
• pp.82-90
• /
• 2021

In the present study, we examined if deep uterine artificial insemination (DUAI) can improve the pregnancy rate of artificial insemination (AI) using epididymal spermatozoa (ES) in Hanwoo cattle. The estrus cycles of 88 Hanwoo cows were synchronized, and 17 cows were artificially inseminated using the DUAI method with ES, 20 cows were artificially inseminated via the uterine body (BUAI) method with ES, and as a control, 51 cows were inseminated by using the BUAI method with ejaculated spermatozoa from 1 proven bull after frozen thawing. The pregnancy rate of the DUAI method (58.8%) was higher than that of the BUAI method (25.0%, p = 0.0498). The motility of ES was examined immediately after thawing and after 3 and 6 h of incubation. The rapid progressive sperm motility of the control group was significantly higher than that of the ES group immediately after thawing and after 3 and 6 h of incubation (p < 0.05). The straight line velocity and average path velocity of the ES group after 6 h of incubation were significantly lower than those in the control group (p < 0.05). The linearity and amplitude of lateral head of ES were lower than those at 6 h (p < 0.05). The flagellar beat cross frequency and hyperactivation of ES were lower than the control spermatozoa immediately after thawing and at 3 h (p < 0.05). These motility parameters suggested that ES had a low motility and fertilization ability compared to the control spermatozoa. After frozen-thawing and 3 h of incubation, the percentage of live spermatozoa with intact acrosomes in the ES was significantly lower than that in ejaculated spermatozoa (p < 0.05). Our findings suggested that the DUAI method can overcome the low pregnancy rate of ES, despite the low motility, viability, and fertilization ability of ES.

• Korean Circulation Journal
• /
• v.52 no.5
• /
• pp.368-378
• /
• 2022

Background and Objectives: Recurrence rates after radiofrequency catheter ablation (RFCA) in atrial fibrillation (AF) patients are not low especially in non-paroxysmal AF. The diameter of left atrium (LA) has been widely used to predict the recurrence after RFCA for decades. However, LA diameter represents structural remodeling of LA and does not reflect electrical remodeling. We aimed to determine the predictive value of electrical remodeling of LA which is represented by the amount of low voltage zone (LVZ). Methods: We performed a retrospective cohort analysis of AF patients who underwent de novo RFCA in a single-center. Results: A total of 3,120 AF patients with de novo RFCA were analyzed. Among these patients, 537 patients underwent an electroanatomic mapping with bipolar voltage measurement of LA. The diameter of LA and flow velocity of LA appendage (LAA) differed significantly according to quartile group of LVZ area and percentage: patients with high LVZ had large LA diameter and low LAA flow velocity (p<0.001). Freedom from late recurrence (LR) was significantly lower in patients with high LVZ area and percentage (p<0.001). The diameter and surface area of LA had area under curve (AUC) of 0.592 and 0.593, respectively (p=0.002 for both). The predictive value of LVZ area (AUC, 0.676) and percentage (AUC, 0.671) were both superior compared with LA diameter (p=0.011 and 0.027 for each comparison). Conclusions: In conclusion, LVZ can predict freedom from LR after RFCA in AF patients. Predictive value was higher in parameters reflecting electrical rather than structural remodeling of LA.

• Journal of Korean Physical Therapy Science
• /
• v.5 no.1
• /
• pp.573-581
• /
• 1998

Gait is a highly complex activity in which many variables can be observed and measured. Walking is a repetitious sequence of limb to move the body and to maintain stability. Normal gait is rhythmic and characterized by alternating propulsive and retropulsive motions of the lower extremities. Pathological gait patterns have four functional categories (deformity, muscle weakness, impaired control, pain). The purpose of this study was to assess the quantitive gait variables(the width of the base, length of a step, stride length, cadence, velocity) in patients with low back pain. Patients walked more slowly, took shorter steps and did not show the symmetrical gait patterns.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.11
• /
• pp.1053-1059
• /
• 2007

This paper presents a target sate estimator(TSE) with low pass filter for improving the gun driving command. The ballistic computer uses target information such as predicted range, velocity, acceleration of a target to generate the gun command. We adopt the finite impulse response(FIR) filter as our TSE to shorten calculation time for the driving command and due to its inherent stability property. We also introduce a post-processing filter to reduce the high frequency components in the output signal of a TSE which may cause instability of gun driving. The first order low pass filter has been designed based on $H{\infty}$ criteria considering the noise characteristics. To show the validity of the present scheme, simulation results are given for the overall gun driving system including aircraft target information.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.12
• /
• pp.1681-1690
• /
• 2003

The effect of roughness is a change in the velocity and turbulence distributions near the surface. Turbulence models with surface roughness effect are applied to the fully developed flow in a two-dimensional, rough wall channel. Modified wall function model, low-Reynolds number k-$\varepsilon$ model, and k-$\omega$ model are selected for comparison. In order to make a fair comparison, the calculation results are compared with the experimental data. The modified wall function model and the low-Reynolds number k-$\varepsilon$ model require further refinement, while the k-$\omega$ model of Wilcox performs remarkably well over a wide range of roughness values.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.171-176
• /
• 2002

A bench test set-up is employed to simulate the friction characteristics of a paper-based friction material operating against a steel plate. Dry friction tests are run as well as tests with transmission fluids. Glazed friction material produces a negative coefficient of friction versus sliding velocity (f-v) curve for both dry friction and lubrication with transmission fluids. At low sliding speeds, the coefficient of friction when operating in transmission fluids for glazed friction materials is greater than that under dry friction. An appreciable negative f-v slope occurs at low sliding speeds for glazed friction materials when running with the transmission fluid. The friction material after running in produces a constant f-v curve under dry friction and a negative slope when lubricated with transmission fluid. At low sliding speeds, the coefficient of friction of the run-in friction material is lower than that of the glazed wet material. On the other hand, the run-in friction material has a larger friction coefficient than does the glazed friction material at higher sliding speeds.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.483-488
• /
• 2008

The exhaust system, including a muffler, is one of the major sources to generate the radiated noise of construction equipment. In general, the muffler is applied to construction equipment in order to reduce the exhaust noise. Sometimes, however, the higher exhaust noise can be experienced due to the flow effect inside a muffler. So, it is required to consider the flow effect to reduce the exhaust noise level of construction equipment. In this paper, various tests were performed to calculate the flow noise effect inside a muffler. Through a series of tests with respect to a variety of design parameters, a new design program for low noise muffler was developed and applied to reduce the exhaust noise of the construction equipments. These results make it possible to understand the dynamic characteristics of the flow noise and to design the low noise muffler for the construction equipments.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.1
• /
• pp.65-77
• /
• 1997

A theoretical and numerical investigation on the boundary-layer flow over a two- or three-dimensional hill is presented. The numerical model is based on the finite volume method with boundary-fitted coordinates. The k-$\varepsilon$ turbulence model with modified wall function and the low-Reynolds-number model are employed. The hypothesis of Reynolds number independency for the atmospheric boundary-layer flow over aerodynamically rough terrain is confirmed by the numerical simulation. Comparisons of the mean velocity profiles and surface pressure distributions between the numerical predictions and the wind-tunnel experiments on the flow over a hill show good agreement. The linear theory provides generally good prediction of speed-up characteristics for the gentle-sloped hills. The flow separation occurs in the hill slope of 0.5 and the measured reattachment points are compared with the numerical prediction. It is found that the k- $\varepsilon$ turbulence model is reasonably accurate in predicting the attached flow, while the low- Reynolds-number model is more suitable to simulate the separated flows.ows.