• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.231-242
• /
• 2010

In order to assess applicability of debris flow simulation on natural terrain in Korea, this study introduced the DEBRIS-2D program which had been developed by Liu and Huang (2006). For simulation of large debris flows composed of fine and coarse materials, DEBRIS-2D was developed using the constitutive relation proposed by Julien and Lan (1991). Based on the theory of DEBRIS-2D, this study selected a valley where a large debris flow was occurred on July 16th, 2006 at Deoksanri, Inje county, Korea. The simulation results show that all mass were already flowed into the stream at 10 minutes after starting. In 10minutes, the debris flow reached the first geological turn and an open area, resulting in slow velocity and changing its flow direction. After that, debris flow started accelerating again and it reached the village after 40 minutes. The maximum velocity is rather low between 1 m/sec and 2 m/sec. This is the reason why debris flow took 50 minutes to reach the village. The depth change of debris flow shows enormous effect of the valley shape. The simulated result is very similar to what happened in the field. It means that DEBRIS-2D program can be applied to the geologic and topographic conditions in Korea without large modification of analysis algorithm. However, it is necessary to determine optimal reference values of Korean geologic and topographic properties for more reliable simulation of debris flows.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.211-218
• /
• 2000

This experiment was conducted to investigate the effect of the cysteine and glutathione on the motility index and morphology of human spermatozoa at the sperm processing in vitro. After treating the sperm with medium containing cysteine and glutathione, we measured the motility index and morphology at 0.5 h and 24 h. 1. Following the sperm culture for 0.5 h after treating the sperm with the medium containing 0, 1, 5, 10 mM cysteine, curvilinear velocity (VCL) was significantly (p<0.05) higher in control than that in all treatments. And straight-line velocity (VSL) was high at 1 mM and average path velocity (VAP) was low at 5 mM and 10 mM. But the motility (MOT) and morphology (NOM) were not different between control and all treatments. Following the sperm culture for 24 h, the MOT was significantly high in treatment groups (58.9, 74.4 and 62.3%), compared with that in control(28.7%) and the VCL was also high in treatment groups (31.4, 37.9, and 34.0 ${\mu}{\textrm}{m}$/s), compared with that in control (21.3 ${\mu}{\textrm}{m}$/s). The VSL (18.4, 21.7, and 18.9 ${\mu}{\textrm}{m}$/s) was significantly higher than control (10.7 ${\mu}{\textrm}{m}$/s) and the VAP (20.3, 24.7, and 21.4 ${\mu}{\textrm}{m}$/s) in treatments was also compared with that in control (12.6 ${\mu}{\textrm}{m}$/s). The NOM was not difference between control and treatments. 2 Following the sperm culture for 0.5 after treating the sperm with the medium containing 0, 1, 5, 10 mM glutathione, the MOT, VCL, VSL, VAP, and NOM were not different between control and treatments. Following the sperm culture for 24 h, the MOT was higher in treatment groups (82.9, 83.6, 83.4%) than in control (51.1%) and the VCL was higher in treatment groups (50.9, 51.3, and 49.4 ${\mu}{\textrm}{m}$/s) than control (34.1 ${\mu}{\textrm}{m}$/s). The VSL was also higher in treatment (17.1 ${\mu}{\textrm}{m}$/s) and the VAP was also higher in treatment groups (30.1, 32.5, and 29.7 ${\mu}{\textrm}{m}$/s) than in control (19.8 ${\mu}{\textrm}{m}$/s). The NOM was not different between control and treatments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.70-77
• /
• 2005

The study was results obtained from the trial make of the hybrid GPS-electromagnetic(EM) compass which overcome shortcoming of GPS compass and EM compass. The results were summarized as follows: GPS compass detected the stable ship's heading at 0.1^{\circ}$ intervals with the turning angular velocity of less than 25^{\circ}$/sec in the experiment for the characteristics of turning angular velocity with stepmotor, but in case of over 25^{\circ}$/sec the compass did not detect it. On the contrary, the EM compass always indicated the ship's heading with no connection of the turning angular velocity, however the compass is low accuracy compared with GPS one owing to a compass error. The ship's headings by the hybrid GPS-EM compass were displayed at fixed point and moving by car; if the GPS compass work the headings were displayed by GPS compass, if not, the heading is provided stably by adding or subtracting of a compass error to the heading of EM compass. Also, each ship's heading was derived from not only the GPS compass but also the EM one by add or subtract of the compass errors, and then was worked covariance for the analogy. The results show that the ship's heading of two compasses has been verified the similarity to 95% confidence level.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.664-669
• /
• 2019

Yeonpyo-beob is a method of manufacturing pigments using bamboo trunk and glue solution. Glue solutions of concentrations 1, 5, and 10% were employed to manufacture pigments, and the characteristics of pigment manufacturing were analyzed according to these concentrations. The pigment manufacturing process can be divided into holding and drying phases. The holding phase involves the sedimentation of relatively large particles, whereas the drying phase involves the sedimentation of small particles. The layers formed during the drying phase have almost similar forms regardless of the concentration of the glue solution. If the concentration of the glue solution is low in the holding phase, the particles are mixed and the formation of a layer is difficult. In contrast, when the concentration of the glue solution is higher, the layer of the pigment is more distinct. These results confirmed that the differences in viscosity due to the variation in the concentration of the glue solution affect the sedimentation velocity of the pigment particles, thereby affecting the formation of the layer of the pigment and the pigment manufacture. Consequently, applying 10% glue solution to reduce the sediment velocity is deemed suitable for the stratification of the pigment particles and the manufacture of pigments.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.103-108
• /
• 2012

A MILD (Moderate and Intense Low oxygen Dilution) combustor decreases NOx formation effectively during the combustion process and NOx formation is affected significantly by the exhaust gas entrainment rate toward fuel and air. The present study focused on the new MILD combustor, which has coaxial cylindrical tube. The outside tube of the new MILD combustor corresponds to the exhaust gas passage and the inner side tube is the furnace passage. The connection pipe is set between the outer side and the inner side tubes and coaxial air nozzle is inserted at the center of the connection pipe. A numerical analysis is accomplished to elucidate the characteristics of exhaust gas entrainment toward the inner furnace with the changes of air nozzle exit velocity, nozzle diameter, nozzle exit position and exhaust gas side pressure. The entrainment rate is proportional to the square root of air nozzle exit velocity and negatively proportional to the pressure difference between the exhaust gas side and furnace side pressures. The effect of air nozzle exit position is not considerable on the exhaust gas entrainment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.62-71
• /
• 2013

The passive emitter location method using TDOA and FDOA measurements has higher accuracy comparing to the single TDOA or FDOA based method. Moreover, it is able to estimate the velocity vector of a moving platform. Recently, several non-iterative methods were suggested using the nuisance parameter but the common reference sensor is needed for each pair of sensors. They show also relatively low performance in the case of a long range between the sensor groups and the emitter. To solve this, we derive the estimation method of the position and velocity of a moving platform based on the Gauss-Newton method. In addition, to analyze the estimation performance of the position and velocity, respectively, we decompose the CRLB matrix into each subspace. Simulation results show the estimation performance of the derived method and the CEP planes according to the given geometry of the sensors.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.94-102
• /
• 1984

These experiments were intended to obtain basic information to develop an effective method of seed storage, using local varieties of seeds of 13 different crops in Korea. The germination ratio and velocity were investigated at one month intervals with seeds stored in six different temperatures($-20^{\circ}C$, $-7^{\circ}C$, $7^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $50^{\circ}C$) for six months. The results obtained are summarized as follows. 1. Final germination ratio of the seeds of different crops were not influenced by the storage temperatures when dry seeds were used, but moist seeds were affected by storage temperatures. 2. The germination velocity and growth of the primary root of the seeds were remarkably influenced by storage temperatures. Viability of the seeds maintained in freezing temperatures ($-20^{\circ}C$, $-7^{\circ}C$) and in low temperature ($7^{\circ}C$) were higher than that of the seeds stored in high temperature ($30^{\circ}C$).

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.333-336
• /
• 2013

Experimental investigation to estimate the feasibility of fast selective catalytic reduction (SCR) or oxidation catalyst combined ammonia SCR system to abate NOx in low temperature condition ($150{\sim}250^{\circ}C$) is reported. Because the conversion of NO to $NO_2$ is pre-requisite of the fast SCR process, the effect of the amount of oxidation catalyst to NO conversion to $NO_2$ was tested. 37, 45 and 51% of conversion rates were obtained for the OCV of 563000, 375000 and 281000 h, respectively. $De-NO_x$ performance in the case of $NO_2/NO_x$ ratio of 45% showed the best result in all tested temperature conditions. Comparison of the fast SCR and standard SCR with the condition of $NO_2/NO_x$ ratio of 45%, $200{\sim}250^{\circ}C$ and space velocity of 10000~30000 h showed that the fast SCR does not show much difference according to the variance of space velocity. Also it was shown that using the fast SCR, the volume of SCR catalyst can be reduced less than half of the standard SCR condition by increasing space velocity without the loss of $De-NO_x$ performance.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.208-223
• /
• 1994

The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1417-1425
• /
• 2014

The selection of morphologically normal spermatozoa is critical to obtain high breeding performances in boar breeding farms and artificial insemination (AI) centers. Parameters for the selection of semen mainly include total sperm motility, concentration, and morphology. However, these primary parameters are often not reliable for discriminating between normal and abnormal, non-fertilizable spermatozoa. The present study was designed to compare the motion characteristics, fertilization ability using in vitro fertilization (IVF), and acrosome formation of the semen from boars having low (boar number 2012) and normal (boar number 2004 and 2023) breeding performances. The ultimate goal was to identify additional simple and easy criteria for the selection of normal sperm. There was no significant difference between boar 2004 and boar 2023 sperm total motility in computer assisted sperm analysis. However, boar number 2012 semen presented a significantly reduced population of rapid moving spermatozoa and an increased population of slow moving spermatozoa compared to boar numbers 2004 and 2023. Analysis of detailed motion characteristics revealed that sperm from boar number 2012 had significantly reduced motility in progressiveness, average path velocity, straight-line velocity (VSL), curvilinear velocity (VCL), straightness, and linearity. The assessment of the fertilizing ability by IVF also showed that sperm from boar number 2012 showed a fertility rate of 3.4%, whereas sperm from boar number 2023 had a fertility rate of 75.45%. Interestingly, most of the sperm nuclei were found on the peripheral area of the oocytes, suggesting that the sperm from boar number 2012 lacked penetration ability into the oocyte zonapellucida. The acrosome formation analysis using Pisum sativum agglutinin staining demonstrated that the sperm from boar number 2012 had a defect in acrosome formation. Consequently, primary parameters for selecting semen before AI such as motility are not sufficient to select normal and fertilizable spermatozoa. In conclusion, the present study suggests that the acrosome staining and detailed motion characteristics such as progressiveness, VCL, and VSL should be included in determining semen quality together with primary parameters for successful AI and high breeding performance in the swine industry.