• Culinary science and hospitality research
• /
• v.19 no.4
• /
• pp.291-306
• /
• 2013

This study aimed to provide a desirable way to design culinary education programs at university by investigating the relationship between student satisfaction with education and job preference based on their high schools. The results of this study showed that a high percentage of students decided to choose culinary arts as their major by themselves. Most students found a career in the culinary field demanding, nevertheless, they appeared to have a strong desire to take up the challenge. Students from culinary high schools showed low satisfaction with their practical cooking courses, while students from vocational high schools seemed to be highly satisfied with those same courses. On the other hand, students from academic high schools showed a high satisfaction with their theory courses, which factored into their decision to choose culinary arts as their major. However, there appeared to be no significant difference in job preference according to the students. Most students, regardless of satisfaction with their education, considered working abroad. On the basis of these results, it is suggested that a culinary training program in universities should be divided tin three groups; academic, vocational & culinary. Each group to have classes in theory, practical and English designed with respect to their prior high school training. In addition, an opportunity for overseas employment should be offered to all three categories.

• Korean journal of applied entomology
• /
• v.28 no.4
• /
• pp.237-243
• /
• 1989

These studies were conducted to investigate the development of chemical resistance in two-spotted spider mite (Tetranychus urticae Koch) through alternate selection for a given period of time with four acaricides including ethion of organophophours compound, dicofol of organo-chlorine compound, cyhexatin of organo-tin compound, and biphenthrin of synthetic pyrethroid compound; and to examine multiple-resistance among the acaricides to the selected populations. The development levels of chemical resistance in the two-spotted spider mite were greatly varied under alternate selection with the different chemical-group combination of four acaricides. Resistant levels of the ethion/dicofol-selected population at 13th-13th generation showed 49.4-fold resistance to ethion and 18.1-fold to dicofol; the ethion/cyhexatin-selected population at 9th-9th generation exhibited 28.1-fold to ethion and 5-fold to cyhexatin; the ethion/biphenthrin-selectd population at 10th-10th generation revealed 39.8-fold to ethion and 19.2-fold to biphenthrin. However, the dicofol/cyhexatin-selected population at 9th-9th generation showed 11.3-fold to dicofol and 4.9-fold to cyhexatin, and the dicofol/biphenthrin-selected population at 12th-12th generation exhibited 11.2-fold to dicofol and 9.4- fold to biphenthrin, while the cyhexatin/biphenthrin-selected population at 9th-9th generation revealed 3.7-fold to cyhexatin and 7.7-fold to biphenthrin. In case of alternate selection, the ehtion/dicofol-selected population revealed moderate multiple-resistance level to biphenthrin. The ethion/cyhexatin-selected and the ethion/biphenthrin-selected populations showed low mutiple-resistance level to biphenthrin and dicofol, respectively. However, the dicofol/cyhexatin-selected, the dicofol/biphenthrin-selected and the cyhexatin/biphenthrin-selected populations exhibited high multiple-resistance level to ethion.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.289-299
• /
• 2005

The ball shear force was investigated in terms of test parameters, i.e. displacement rate and probe height, with an experimental and non-linear finite element analysis for evaluation of the solder joint integrity in area array packages. The increase in the displacement rate and the decrease in the probe height led to the increase in the shear force. Excessive probe height could cause some detrimental effects on the test results such as unexpected high standard deviation and probe sliding from the solder ball surface. The low shear height conditions were favorable for assessing the mechanical integrity of the solder joints. The mechanical and electrical properties of the Sn-37Pb/Cu and Sn-3.5Ag/Cu BGA solder joints were also investigated with the number of reflows. The total thickness of the intermetallic compound (IMC) layers, consisting of Cu6Sn5 and Cu3Sn, was increased as a function of cubic root of reflow time. The shear force was increased up to 3 or 4 reflows, and then was decreased with the number of reflows. The fracture occurred along the bulk solder, in irrespective of the number of reflows. The electrical resistivity was increased with increasing the number of reflows.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.70-78
• /
• 1991

Both long period of summer drought and unusual high water temperature in 1988 caused the harmfull effect to the aquacultural organisms in south coast of Korea. One of those was the mass mortality of arkshell seedlings in Jinhae Bay. The purpose of this study was to verify the effects of environmental factors on arkshell seedlings by investigating not only water quality and food organisms in culturing grounds, but also meteorological conditions. Water temperature in November was higher at $2.0^{\circ}C$ than mean water temperature and the concentration of total inorganic nitrogen and N/P ratio were $0.38{\mu}g-at/l,$ 0.98, respectively which indicated the exhaustion of nutrients, especially nitrogen in the study area. In analysis of phytoplankton population structure, species diversity index(H) , equitability-index(e), species richness $index(d_1)$ were low, but dominance $index({\delta}_2)$ was high at the value of 98.4 and dominant species was Nitzschia pungens. In conclusion, it seems that mass .mortality of arkshell seedlings in November was resulted from the metabolism disorder with poor food organism under the unstable marine environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.646-651
• /
• 2018

This paper reports that the electronic properties at a $P3HT/TiO_2$ interface associated with exciton dissociation and transport can be tailored by the insertion of a graphene quantum dot (GQD) layer. For donor/acceptor interface modification in an $ITO/TiO_2/P3HT/Al$ photovoltaic (PV) device, a continuous GQD film was prepared by a sonication treatment in solution that simplifies the conventional processes, including laser fragmentation and hydrothermal treatment, which limits a variety of component layers and involves low cost processing. The high conductivity and favorable energy alignment for exciton dissociation of the GQD layer increased the fill factor and short circuit current. The origin of the improved parameters is discussed in terms of the broad light absorption and enhanced interfacial carrier transport.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.53.2-53.2
• /
• 2010

지금까지 능동 구동 디스플레이의 TFT backplane에 사용하고 있는 채널 물질로는 수소화된 비정질 실리콘(a-Si:H)과 저온 폴리실리콘(low temperature poly-Si)이 대표적이다. 수소화된 비정질 실리콘은 TFT-LCD 제조에 주로 사용되는 물질로 제조 공정이 비교적 간단하고 안정적이며, 생산 비용이 낮고, 소자 간 특성이 균일하여 대면적 디스플레이 제조에 유리하다. 그러나 a-Si:H TFT의 이동도(mobility)가 1 cm2/Vs이하로 낮아 Full HD 이상의 대화면, 고해상도, 고속 동작을 요구하는 UD(ultra definition)급 디스플레이를 개발하는데 있어 한계 상황에 다다르고 있다. 또한 광 누설 전류(photo leakage current)의 발생을 억제하기 위해서 화소의 개구율(aperture ratio)을 감소시켜야하므로 패널의 투과율이 저하되고, 게이트 전극에 지속적으로 바이어스를 인가 시 TFT의 문턱전압(threshold voltage)이 열화되는 문제점을 가지고 있다. 문제점을 극복하기 위한 대안으로 근래 투명 산화물 반도체(transparent oxide semiconductor)가 많은 관심을 얻고 있다. 투명 산화물 반도체는 3 eV 이상의 높은 밴드갭(band-gap)을 가지고 있어 광 흡수도가 낮아 투명하고, 광 누설 전류의 영향이 작아 화소 설계시 유리하다. 최근 다양한 조성의 산화물 반도체들이 TFT 채널 층으로의 적용을 목적으로 활발하게 연구되고 있으며 ZnO, SnO2, In2O3, IGO(indium-gallium oxide), a-ZTO(amorphous zinc-tin-oxide), a-IZO (amorphous indium-zinc oxide), a-IGZO(amorphous indium-galliumzinc oxide) 등이 그 예이다. 이들은 상온 또는 $200^{\circ}C$ 이하의 낮은 온도에서 PLD(pulsed laser deposition)나 스퍼터링(sputtering)과 같은 물리적 기상 증착법(physical vapor deposition)으로 손쉽게 증착이 가능하다. 특히 이중에서도 a-IGZO는 비정질임에도 불구하고 이동도가 $10\;cm2/V{\cdot}s$ 정도로 a-Si:H에 비해 월등히 높은 이동도를 나타낸다. 이와 같이 a-IGZO는 비정질이 가지는 균일한 특성과 양호한 이동도로 인하여 대화면, 고속, 고화질의 평판 디스플레이용 TFT 제작에 적합하고, 뿐만 아니라 공정 온도가 낮은 장점으로 인해 플렉시블 디스플레이(flexible display)의 backplane 소재로서도 연구되고 있다. 본 실험에서는 rf sputtering을 이용하여 증착한 a-IGZO 박막에 대하여 열처리 조건 변화에 따른 a-IGZO 박막들의 광학적, 전기적 특성변화를 살펴보았고, 이와 더불어 a-IGZO 박막을 TFT에 적용하여 소자의 특성을 분석함으로써, 열처리에 따른 Transfer Curve에서의 우리가 요구하는 Threshold Voltage(Vth)의 변화를 관찰하였다.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2018

The geology of Hidalgo state in Mexico is formed by a Precambrian metamorphic rock base which discordantly supports a strong Paleozoic sedimentary rock sequence. Triassic-Jurassic and Cretaceous sedimentary rocks overlie the above-mentioned rocks at a discordant angle. These Mesozoic rocks are in turn covered by a Cenozoic structure which is marine at its base. At the top, the structure changes to andesitic and basaltic composition volcanic rocks. And, a great variety of mineral deposits, both metallic and nonmetallic, is present in Hidalgo state. The host rocks of these deposits are also very varied in age from Mesozoic to Tertiary. Mineralization age corresponds to Tertiary in 90% of the area. Hidalgo state occupies as an important place in national silver and manganese production. Main mineral deposits correspond to argentiferous veins hosted in sedimentary rocks. Following in order of importance are lead and zinc, as well as some small iron deposits. There is evidence of tin and molybdenum mineralization, but these deposits have not been exploited because of their low grade and volume. And, Hidalgo state has different types of nonmetallic mineral deposits such as sedimentary, hydrothermal, metamorphic and volcanic origins.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.259-263
• /
• 2007

For the preparation of $^{99m}Tc$-labeled RBC, $10{\sim}20\;{\mu}g/kg$ of Stannous(II) chloride and $10{\sim}40\;min$ of preparation was used. For finding out the effect of contrast agent, the blood samples were collected in three days, seven days, and 1 months after the diagnostic procedure. In the normal volunteer, the concentration of reducing agent and preparation time did not effect on the radiochemical yield. But in the patients, 10 mg of Stannous(II) chloride and 60 min incubation times was shown high radiochemical yield. Contrast agent has a significant effect on the radiochemical yield. Although the blood samples which were collected after seven days of diagnostic procedure did not effect on the radiochemical yield of $^{99m}Tc$-labeled RBC, but the radiochemical yield of $^{99m}Tc$-labeled RBC which was prepared with a sample of high concentration of contrast agent in blood led to low radiochemical yield. For these samples, the modified method showed high radiochemical yield than previous in vivo preparation method. The recommended method is followed. Blood collecting was performed at 30 minutes after injection of reducing agent, and it is centrifuged for removal of plasma. After addition of $^{99m}TcO^-_4$, sample reservoir was rotated. After addition of normal saline, and it is centrifuged for separation of saline. Then $^{99m}Tc$-labeled RBC was obtained after removal of saline.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.6-13
• /
• 2006

Tin doped indium oxide(ITO) and Al doped zinc oxide(ZnO:Al) films, which are widely used as a transparent conductor in optoelectronic devices, were prepared by using the capacitively coupled DC magnetron sputtering method. ITO and ZnO:Al films with the optimum growth conditions showed each resistivity of $1.67{\times}10^{-3}[{\Omega}-cm],\;2.2{\times}10^{-3}[{\Omega}-cm]$ and transmittance of 89.61[%], 90.88[%] in the wavelength range of the visible spectrum. The two types of 5 inch-PDP cells with ZnO:Al and ITO transparent electrodes were made under the same manufacturing conditions. The PDP cell with ZnO:Al film was optimally operated in the mixing gas rate of Ne(base)-Xe(8[%]), and at gas pressure of 400[Torr]. It also shows the average measured brightness of $836[cd/m^2]$ at voltage range of $200{\sim}300$[V]. Luminous efficiency, one of the key parameter for high brightness and low power consumption, ranges from 1.2 to 1.6[lm/W] with increasing frequency of ac power supplier from 10 to 50[Khz]. The brightness and luminous efficiency are lower than those with ITO electrode by about 10[%]. However, these values are considered to be enough for the normal operation of PDP TV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.66-66
• /
• 2008

Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.