• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.173.2-173.2
• /
• 2014

Thin nitride thin films were synthesized by reactive radio-frequency magnetron sputtering in the ultra high vacuum (UHV) chamber. To control the characteristics of thin films, tin nitride thin films were obtained various argon and nitrogen gas mixtures, especially low nitrogen gas ratios. Tin nitride thin films were analyzed with alpha step, scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and 4 point probe measurement. The result of alpha step and SEM showed that the thickness of thin nitride thin films were decreased with increasing nitrogen gas ratios. The metallic tin structure was decreased and the amorphous tin nitride structure were observed by XRD with higher nitrogen gas ratios. The oxidation state of tin and nitride were studied with high resolution Sn 3d and N 1s XP spectra.

• 한국측량학회지
• /
• 제15권2호
• /
• pp.207-213
• /
• 1997

본 연구는 저밀도 임의지점의 지형정보를 이용하여 수치지형도를 제작하는데 있어 시간적, 경제적 측면을 포함하는 효율성과 정밀도 측면에서 각각의 수치지형도 제작기법을 비교 분석하여 향후 지형정보시스템의 구축에 있어서 저밀도의 제한된 지형정보를 이용하여 지형분석과 같은 많은 응용분야에 유용하게 이용될 수 있는 3차원 지형모델링의 효율적 기법을 제시하는 연구로써 다음과 같은 결론을 얻었다. 수치지형도를 제작함에 있어 A, B지역 모두 저밀도 임의지점의 지형정보를 이용하여 TIN기반의 지형모델링 기법으로 수치지형도를 제작하는 기법이 가장 신속하면서도 양호한 결과를 가져왔으며 TIN과 GRID기반의 지형모델링 기법으로 제작한 수치지형도를 시각적으로 분석한 결과 A, B지역모두 거의 홉사한 결과를 가져왔으나 DXF 파일로 저장한 데이터의 크기는 TIN기반의 지형모델링 기법이 GRID기반보다 상대적으로 적은 저장용량을 차지하는 것으로 나타났다. 또한 Grid기반의 지형모델링 기법에 의해 제작한 수치지형도에 있어서 저밀도 임의지점의 원형 데이터와 Gridding방법에 의해 보간된 데이터의 표준편차는 A, B지역 모두 Radial basis function 보간기법이 가장 정밀한 보간 결과를 제시하였다.

• Current Photovoltaic Research
• /
• 제11권1호
• /
• pp.18-26
• /
• 2023

Tin perovskite solar cells have attracted a lot of attention due to their potential to address the toxicity of lead, which is the biggest barrier to commercialization of perovskite solar cells. Unlike other lead-free perovskite, tin perovskite have a direct bandgap, which is suitable for use as light harvesting, and relatively good stability, which has led to a lot of attention. Since the first tin perovskite solar cell was reported in 2014, it has achieved an impressive power conversion efficiency of 14.81%. However, this efficiency is still low compared to that of lead perovskite solar cells, and the stability of tin perovskite solar cells is also an issue that needs to be addressed. In this review, we will discuss the basic properties of the tin atom in comparison to the lead atom, and then discuss the crystal structure, phase transition, and basic properties of tin perovskite. We will then discuss the advantages, applications, challenges, and strategies of tin perovskite, In particular, we will focus on how to prevent the oxidation of tin, which is arguably the biggest challenge for using tin perovskite solar cells. At the end, we summarize the key factors that need to be addressed for higher efficiency and stability, emphasizing what is needed to commercialize tin perovskite solar cells.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.122-122
• /
• 1997

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.263-263
• /
• 2002

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1334-1338
• /
• 2006

In this work, indium tin oxide (ITO) thin film was fabricated by indium-tin-organic sol including ITO nanoparticle. ITO nanoparticle showed ultrafine size about 5 nm and (222) preferred crystal structure. Also, ITO sol-gel thin film showed good optical transmittance over 83% and electrical resistance less than $7\;{\times}\;10^3\;{\Omega}$.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1031-1034
• /
• 1999

Tin oxide films have been grown employing the chemical vapor deposition technique under reduced pressure conditions using tetramethyltin as the precursor and oxygen as the oxidant. An activation energy derived for the deposition reaction under representative deposition conditions has a value of 89±3 kJ mol-1, suggesting a typical kinetic control. Deposition rates of tin oxide films exhibit a near first order dependence on tetramethyltin partial pressure and a zeroth order dependence on oxygen partial pressure. This study provides the first quantitative information about the growth kinetics of tin oxide films from tetramethyltin by the cold-wall low-pressure chemical vapor deposition.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.104-109
• /
• 2013

Tin and Tinoxide nanoparticles were prepared by arc-discharge nanopowder process. The negative electrode were fabricated using Tin and Tinoxide nanopower. The microstructure and electrochemistry properties were investigated and compared between Tin and Tinoxide. The oxidation film has microstructure of core/shell type and the shell which was attached around Tin nanoparticle consisted of amorphous $SnO_2$. The shape of Tinoxide nanoparticles was formed with irregular shape in comparison with Tin particle. Initial discharge capcity of Tinoxide electrode possesed about 1000mAh/g, which is about 320mAh/g higher than Tin electrode. Irreversible capacity of Tin electrode is much higher than Tinoxide. The cycle performance of Tinoxide electrode was indicated that is batter than Tin. The Tin negative electrode lost most of capacity after 4 cycle but Tinoxide electrode still retained the capacity. The Tinoxide does show some promise as Li-ion battery anode due to their large reversible capacity at low potentials.

• 한국방사선학회논문지
• /
• 제15권3호
• /
• pp.301-306
• /
• 2021

전산화단층촬영장치 (Computed tomography, CT)의 의료 방사선량을 낮추기 위한 방법으로 주석필터의 사용을 통해 직접적으로 환자의 선량을 낮추는 방법이 있다. 그러나 주석필터의 사용으로 바뀐 X선 스펙트럼으로 인해 기존의 영상과 다른 인상의 영상으로 나타나기 때문에 질병 진단에 영향을 줄 수 있다. 따라서 본 연구에서는 흉부 저선량 CT에서 주석필터의 적용 및 high pitch에 따른 영상평가를 진행함으로써 주석필터 사용 시 영상의 변화 양상을 살펴보았다. 본 연구에서는 비교를 위해 총 3개의 그룹으로 나누어 영상을 획득하였다. Group 1은 주석필터를 사용하지 않았으며, 기존에 사용하던 pitch인 0.8의 영상을 획득하였다. Group 2는 주석필터를 사용하였고, pitch는 0.8이며 Group 3은 주석필터를 사용하였으며 pitch는 2.5이다. 영상의 화질을 비교하기 위해 no-reference 기반으로 사용되는 블라인드 품질 평가 인자 중 natural image quality evaluator (NIQE)와 blind/referenceless image spatial quality evaluator (BRISQUE)를 사용하였다. 그 결과 NIQE 수치는 Group 1, Group 3, Group 2 의 순서대로 낮게 나타났다. BRISQUE 수치는 Group 3, Group 2, Group 1 의 순서대로 낮게 나타났다. 이를 통해 흉부 저선량 CT에서 주석필터 및 high pitch 기술의 영상의 우수성을 확인함으로써 특히 호흡 조절이 어려운 흉부 저선량 CT 환자에 있어서 더 정확한 영상에 대한 기대감을 가질 수 있는 기초 자료로 활용될 수 있을 것이라 사료된다.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.17-24
• /
• 2011

To investigate the relationship between heat treatment in zirconium alloy tubing process and metallurgical characteristics of Zr-1Nb-0.69Sn-0.11Fe alloy tubes, mechanical and oxidation behaviors of tubes heat treated at different temperatures after the final pilgering were investigated. The stress strain curves exhibited the saturation behaviors in all heat treatment conditions ($460{\sim}600^{\circ}C$) in this study with the onset strain of saturation increased with increase of post-pilgering annealing temperature. The strength fell off rapidly with increasing annealing temperature. The ultimate strength of the low tin Zr-1Nb-0.69Sn-0.11Fe alloy with slightly higher iron and oxygen contents in this study was found to be higher than Zr-1Nb-1Sn-0.1Fe alloy. The oxidation experiments in steam condition revealed that the corrosion resistance of low tin Zr-1Nb-0.69Sn-0.11Fe alloy was better than the Zr-1Nb-1Sn-0.1Fe alloy with a higher Sn content. The weight gain of low tin Zr-1Nb-0.69Sn-0.11Fe alloy tubes gradually increased with the increasing annealing temperature possibly due to the decreased Nb content in the matrix because of the formation of ${\beta}-Nb$ particles.