• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.345-358
• /
• 2018

Heterogeneous structure and, particularly, low resistance to tension stresses leads to different mechanical properties of the concrete in different loading situations. To solve this problem, the tension zone of concrete elements is reinforced. Development of the cracks, however, becomes even more complicated in the presence of bar reinforcement. Direct tension test is the common layout for analyzing mechanical properties of reinforced concrete. This study investigates scatter of the test results related with arrangement of bar reinforcement. It employs results of six elements with square $60{\times}60mm$ cross-section reinforced with one or four 5 mm bars. Differently to the common research practice (limited to the average deformation response), this study presents recordings of numerous strain gauges, which allows to monitor/assess evolution of the deformations during the test. A simple procedure for variation assessment of elasticity modulus of the concrete is proposed. The variation analysis reveals different deformation behavior of the concrete in the prisms with different distribution of the reinforcement bars. Application of finite element approach to carefully collected experimental data has revealed the effects, which were neglected during the test results interpretation stage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.788-795
• /
• 2005

In this study, the progressive failure and creep of the traditional ground anchor structure were decreased and a new ground anchor that can attain the required pull-out resistance even in soft sandy soils with low confining pressure was developed. Ground anchors are classified depending on the kind of stress the grout is subjected. If the grout material is subjected to tension then it is classified as tension anchor while when the grout material is subjected to compression it is classified as compression anchor. The ground anchor that possesses both the tension and compression mechanism mentioned above is known as composition anchor. It is the objective of this study to develope this type of composition anchor. The structure of the newly developed ground anchor was presented. Pull-out test in different types of soil and the behaviour during Pull-out test was also presented.

• Ocean Systems Engineering
• /
• 제8권3호
• /
• pp.345-360
• /
• 2018

Increasing demand for large-sized Floating, Storage and Regasification Units (FSRUs) for oil and gas industries led to the development of novel geometric form of Buoyant Leg Storage and Regasification Platform (BLSRP). Six buoyant legs support the deck and are placed symmetric with respect to wave direction. Circular deck is connected to buoyant legs using hinged joints, which restrain transfer of rotation from the legs to deck and vice-versa. Buoyant legs are connected to seabed using taut-moored system with high initial pretension, enabling rigid body motion in vertical plane. Encountered environmental loads induce dynamic tether tension variations, which in turn affect stability of the platform. Postulated failure cases, created by placing eccentric loads at different locations resulted in dynamic tether tension variation; chaotic nature of tension variation is also observed in few cases. A detailed numerical analysis is carried out for BLSRP using Mathieu equation of stability. Increase in the magnitude of eccentric load and its position influences fatigue life of tethers significantly. Fatigue life decreases with the increase in the amplitude of tension variation in tethers. Very low fatigue life of tethers under Mathieu instability proves the severity of instability.

• 한국의류학회지
• /
• 제24권7호
• /
• pp.1065-1072
• /
• 2000

The molecular areas and the interfacial tension behavior of ten nonionic surfactants, i.e., Span 20 and Tween 20, 40, 60. 80, 21, 61, 81, 65, & 85 are tested to assay their effects on the wetting and liquid retention properties of hydrophilic and hydrophobic fibrous materials. The molecular areas at water/air interface are derived from Gibbs’adsorption equations. The following conclusions are drawn from the results: 1) Span 20 is efficient in lowering the interfacial tension and effective in adsorption at the water/air interface, resulting in the low interfacial tension at critical micelle concentration (${\gamma}$$_{CMC}$) and a small molecular area($\omega$), 2) when the hydrophiles of the surfactants are constant, $\omega$’s increase as hydrophobe carbon numbers of the surfactants increase, 3) when the hydrophobes are constant, ${\gamma}$$_{CMC}$’s and $\omega$’s increase as the hydrophile ethylene oxide units increase, indicating effectiveness and efficiency is parallel in this case, 4) the ethylene oxide unit length as a hydrophile has greater influence on u than the hydrophobe chain length.han the hydrophobe chain length.gth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2513-2515
• /
• 2000

The Hot Strip Mill(HSM) process consists of reheating furnace, roughing mill, finishing mill and coiler. Reheating furnace heats slab and roughing mill, finishing mill produces strip from this slab. The quality of this production mainly depends on finishing mill, which consists of 6 or 7 stands. Between stands a looper is installed for the better material flow. Automatic gage control(AGC), speed control system and looper system, which are connected with each other, are the main control systems for HSM. The low strip tension can make a loop between stands, which can be caused cobble. On the other hand, high strip tension causes thickness and width reduction, which affects the product quality, and can lead to tear the strip, if it is too high. Because of it, a proper strip tension is needed for better material flow: e.g. A good looper control system is substantial for the better production quality. What is handled in this paper is, the looper controller, which is developed to minimize the fluctuation of width of strip by maintaining an appropriate strip tension between stands and to achieve the stability of the looper control system. And its performance compared with a conventional PID controller is also discussed. The difficulties associated with the maintenance of the constant tension are described.

• Earthquakes and Structures
• /
• 제23권3호
• /
• pp.221-229
• /
• 2022

The external post-tension technique is one of the best strengthening methods for reinforcement and improvement of the various steel structures and substructure components such as beams. In the present work, the load carrying capacity of the post-tensioned tapered steel beams with external shape memory alloy (SMA) tendons are studied. 3D nonlinear finite element method with ABAQUS software is used to determine the effects of the increase in the flexural strength, and the improvement of the load carrying capacity. The effect of the different parameters, such as geometrical characteristics and the post-tension force applied to the tendons are also studied in this research. The results reveal that the external post-tension with SMA tendons in comparison with the steel tendons causes a significant improvement of the loading capacity. According to this, using SMA tendon for the reinforcement of the tapered beams causes a decrease in weight of these structures and as a consequence causes economic benefits for their application. This method can be used extensively for steel beams due to low executive costs and simplicity of the operation for post-tension.

• 대한의료기공학회지
• /
• 제21권1호
• /
• pp.13-21
• /
• 2022

Objective : This report aimed to provide an introduction to the clinical application of Whidam's Su-Gi therapy to low back pain. Methods : Whidam's Su-Gi therapy for low back pain consisted of manual therapy according to upward and downward evaluations. Upward evaluation items include SLR, hip joint LOM, legs raising together, raising knee and turning left and right, and waist raising. Downward evaluation items include spinal alignment in sitting position, shoulder part tension, and cervical part tension. After performing the manual therapy according to the evaluation at each stage, the pain and dysfunction are reevaluated to confirm the negative and proceed to the next step. Conclusions : The clinical application of Whidam's Su-Gi therapy to low back pain is a method of interpreting and approaching low back pain disease with the theory of attraction pathology according to the principle of ChoGi-therapy(調氣療法).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.134-135
• /
• 2013

이 연구에서는 해양생물 부착 방지 도료를 만들기 위해 표면장력이 낮은 실리콘계 폴리머를 합성하여 도료를 제조하고 물리적인 특성 및 방오성을 고찰하였다. 도장 시스템은 하도/중도로 방청도료를 적용하고 상도로 제조한 도료를 사용하여 도막물성을 평가하였다. 평가결과 도막이 평활하고 낮은 표면장력과 탄력성을 지녀 해양생물의 고착 및 기계적 접착을 저해하여 우수한 방오성능을 나타냄을 확인하였다.

• Journal of Acupuncture Research
• /
• 제21권2호
• /
• pp.183-203
• /
• 2004

Objective : Tension-type headache is the most common headache. The objective of this study is to find the clinical manifestation of tension-type headache and correlation with autonomic bioelectric response. Methods : This observation was carried out on 60 patients with tension-type headache. We used headache questionnaire and the Autonomic Bioelectric Response recoder(ABR-2000) for this study. Results : 1. Distribution of sex & age : male : female=5 : 7, 50s&60s group (28.3%) 2. Duration of onset : over 5years(50%), over one years(83.4%) 3. Causes of illness : stress(58.3%), severe fatigue(53.5%), tension(33.3%) 4. Time of attack : irregular(56.7%), day time(16.7%) 5. Pattern of pain: heavy(31 people), stiffness of occipital region (27 people) tightening around the head(25 people) 6. Curve : 40%, 56.7%, 35.0% SL(Slope low) at peak 1, 2, 3/ SH&SI not found 7. Regulation : 16.7% RR(Regulation reverse) at peak 1, 25% RH(Regulation high) at peak 2, 15% RR(Regulation reverse) at peak 3 8. Graph : Activity-60.0%, 70.0%, 63.3% lowered reaction(L, LR, L!) at peak 1, 2, 3 Reactivity-83.3%, 95.0%, 93.3% lowered reaction at peak 1, 2, 3 Conclusion : We find tension-type headache has remarkable relativeness with autonomic bioelectric response.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.129-138
• /
• 2005

본 논문은 사장교에서 모니터링 시스템을 통해 획득한 가속도 자료를 이용하여 케이블 관리기준 장력을 결정하기 위한 방법을 제시한다. 현재 한국의 많은 장대교량에 모니터링 시스템이 설치되어 있다. 모니터링 시스템은 교량의 이상현상이나 손상을 진단하고 관리주체에 경고하기 위해 설치된다. 사장교에 있어서는 그 기하학적인 형상 때문에 케이블 장력이 교량 이상징후의 중요한 지시가 될 수 있다. 만약 케이블 장력관리치가 너무 높거나 또는 너무 낮게 설정되면, 모니터링 시스템은 교량의 이상징후를 적절하게 경고하지 못할 것이다. 일반적으로, 관리치는 경험이나 공학적 판단에 의해 결정된다. 그러나 본 논문에서는 케이블 장력에 대한 확률분포모형과 신뢰성 해석에 기초한 새로운 케이블 장력관리치 설정에 대한 방법을 제시한다. 제안된 방법은 적용성 검토를 위하여 실제 콘크리트 사장교에 적용되었다.