• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.405-409
• /
• 2019

Piezoelectric ceramic specimens with the $Pb(Mg_{1/3}Nb_{2/3})_{0.65}Ti_{0.35}O_3$ (PMN-PT) composition are prepared by the solid state reaction method known as the "columbite precursor" method. Moreover, the effects of the $Li_2O-Bi_2O_3$ additive on the microstructure, crystal structure, and piezoelectric properties of sintered PMN-PT ceramic samples are investigated. The addition of $Li_2O-Bi_2O_3$ lowers the sintering temperature from $1,200^{\circ}C$ to $950^{\circ}C$. Moreover, with the addition of >5 wt.% additive, the crystal structure changes from tetragonal to rhombohedral. Notably, the sample with 3 wt.% additive exhibits excellent piezoelectric properties ($d_{33}=596pC/N$ and Kp = 57%) and a sintered density of $7.92g/cm^3$ after sintering at $950^{\circ}C$. In addition, the sample exhibits a curie temperature of $138.6^{\circ}C$ at 1 kHz. Finally, the compatibility of the sample with a Cu electrode is examined, because the energy-dispersive X-ray spectroscopy data indicate the absence of interdiffusion between Cu and the ceramic material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.642-645
• /
• 2002

Microwave dielectric properties of $ZnWO_4$ ceramic were investigated with calcination and sintering temperatures. The dielectric properties required for such application are high dielectric constant$(\varepsilon_r)$, high $Q{\times}f_o$ value and low temperature coefficient of resonant frequency$(\tau_f)$. These requirement correspond to necessities for size reduction, excellent frequency selectivity, good temperature stability of devices. $ZnWO_4$ ceramics could be sintered at low $1075^{\circ}C$, which was comparatively low temperature for microwave dielectrics. As a result, $ZnWO_4$ showed the dielectric constant of 13, quality factor($Q{\times}f_o$ value) of 22000 and 'temperature coefficient of resonant frequency$(\tau_f)$ of $-65{\pm}5ppm/^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제15권3호
• /
• pp.197-206
• /
• 1983

핵연료로서 사용 가능한 O/U비 범위인 2.005～2.01의 이산화 우라늄의 소결체를 환원 공정을 거치지 않고 직접 $CO_2$/CO 혼합깨스 분위기에서 소결하였다. O/U비 변화가 소결속도에 미치는 영향을 소결후기에서 조사하였으며, 일정 O/U비에 있어서의 소결 온도-시간-밀도-입도 간의 관계를 나타내는 소결 다이아그램을 결정하였다. 그결과 소결분위기중의 산소분압만을 조절하여, 이론밀도의 95%이상, 평균입도 7$\mu\textrm{m}$ 이상의 소결체를 1050$^{\circ}$～120$0^{\circ}C$의 저온에서 쉽게 얻을 수 있었다. 소결후기의 결정입도의 성장속도는 D=(Kt)$^{1}$4/의 실험식에 따르고, 결정립성장에 대한 활성화 에너지는 O/U비가 2,005, 2.01, 2.10일 때 각각 75, 64, 62Kcal/mol이었다. O/U비가 변화해도 활성화 에너지는 크게 변하지 않았지만, 소결은 산소 분압의 증가에 따라 크게 증가하였다.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.942-946
• /
• 2004

The crystalline and dielectric properties on Al$_2$O$_3$ filled glass frit (CaO-Al$_2$O$_3$-SiO$_2$-MgO-B$_2$O$_3$) with admixtures of TiO$_2$ have been investigated. The dielectric constant value of 7.5 ∼ 7.8, qualify factor value of 700 were obtained for glass frit : Al$_2$O$_3$(50 : 50 wt%) ceramics. Addition of TiO$_2$ less than 5 wt% slightly increased the dielectric constant from 7.8 to 8.8 due to higher dielectric constant of TiO$_2$. With increasing the amount of TiO$_2$ up to 5 wt%, the temperature coefficient of dielectric properties was improved. When the TiO$_2$ 5 wt% were added, dielectric properties were dielectric constant 8.8, quality factor 840 and the temperature coefficient of dielectric 45 ppm/$^{\circ}C$ at a sintering temperature 920$^{\circ}C$.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.626-633
• /
• 1998

본 연구에서는 고유전율의 저온소성용 글라스/세라믹을 제조하고자, SiO2-TiO2-RO계 결정화 유리를 제조하고 Al2O3를 필러 물질로 혼합하여 복합체를 제조하고 그 특성을 관찰하였다. 본 유리조성으로써 $900^{\circ}C$ 이하에서 결정화되는 유리의 제조가 가능하였고, RO (BaO, CaO, SrO)의 성분에 따라 결정화 온도는 변화함을 알 수 있었다. 본 유리조성에 $Bi_2O_3$를 플럭스로 첨가하고, 세라믹 필러로써 Al2O3를 사용하여 $860^{\circ}C$에서 소성함으로써 고유전율의 저온소성용 글라스/세라믹의 제조가 가능하였고, 이때 복합체의 밀도는 3.96g/$\textrm{cm}^3$ 이었고, 유전율은 17, Q.f 값은 600이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1594-1597
• /
• 2008

Carbon nanotube (CNT) cathodes were fabricated using nano-sized silver powders as a bonding material. The effects of powder size on the field emission properties for the CNT cathode were investigated The better emission properties of CNT cathodes using smaller particles are due to a low sintering temperature of the bonding materials.

• 전기의세계
• /
• 제31권6호
• /
• pp.445-449
• /
• 1982

This Paper describes the influence of additive concentrations and sintering temperature on the surge protection performance in ZnO ceramic varistors. It is found from the experiments that the metal-oxide semiconductors based oi ZnO with an additive incorporation of 0.50% molx(Bi$\_$2/O$\_$3/+MnO+CoO+Cr$\_$2/O$\_$3/+2Sb$\_$2/O$\_$3/) and sintered at 1250.deg. C present excellent V-I characteristics in view of transient surge suppression. Gapless arrester element with aluminum electrodes shows also good reliability against impulse shock and marks a low voltage clamping ratio(V$\_$1KA/V$\_$1mA/<2.0) compared with the conventional SiC varistors.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.144-148
• /
• 2002

수산화아파타이트/티타늄 복합체를 스파크 플라즈마 소결(SPS) 장치를 이용하여 4층 경사 기능 재료 (FGM)로 제조하였다. 수산화아파타이트/티타늄 복합체의 최대 밀도와 이축 강도는 $1200^{\circ}C$에서 8분 동안의 SPS 조건에서 얻었다. 그러나, 수산화아파타이트는 $1100^{\circ}C$에서 사칼슘인산염(TetCP)으로 분해되었고, 티탄산칼숨 화합물 ($CaTiO_3$)이 형성되었다. 수산화아파타이트에 티타늄을 첨가하면 수산화아파타이트가 저온에서 쉽게 분해되었다.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.471-476
• /
• 1994

The influence of TiO2 addition on the sintering and microstructure of magnesia ceramics was studied. An excess amount of TiO2 over the solid solubility limit reacted with magnesia to form Mg2TiO4 compound above 130$0^{\circ}C$. The deviation of lattice parameter of MgO was estimated to be under 0.2% when existence of TiO2 in MgO. The addition of TiO2 markedly promoted the densification of MgO at comparatively low temperature and the sintered density of about 98% of the theorectical was obtained at 150$0^{\circ}C$, 2h. The densification was mainly governed by grain growth of MgO and the effect of Mg2TiO4 existing as a second phase on depression of grain growth of MgO was not exhibited.

• 한국세라믹학회지
• /
• 제43권6호
• /
• pp.344-350
• /
• 2006

Porous cordierite was synthesized by the mechano-chemical processing using fly ash. The phase evolution of cordierite was investigated as a function of processing variables such as milling time and sintering temperature. In this study, the phase transition path of cordierite from fly ash was followed by sapprine/spinel ${\to}$ mullite/spinel ${\to}{\alpha}$-cordierite. Porous cordierite fabricated after 32 h of milling time and sintering at $1150^{\circ}C$ showed relatively low thermal expansion coefficient ($2.5{\times}10^{-6}/^{\circ}C\;(25{\sim}1000^{\circ}C$)) and high porosity (75%).