• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.421-424
• /
• 2004

In this study, in order to develop low temperature sintering ceramics for ultrasonic vibrator, PNW-PMN-PZT system ceramics were manufactured with the amount of $CaCO_3$ addition and their piezoelectric, dielectric and microstructural characteristics were investigated. $CaCO_3$ addition to PNW-PMN-PZT basic composition was proved to be capable of sintering the ceramics at temperature below $1000^{\circ}C$ due to the effect of $Li_2CO_3-CaCO_3$ liquid phase. However, with increasing the amount of $CaCO_3$ addition, the second phase was appeared. As the results, electromechanical coupling coefficient (kp) and dielectric constant $(\epsilon_r)$ decreased. Taking into consideration electromechanical coupling coefficient (kp) of 0.49, mechanical quality factor (Qm) of 1396, dielectric constant $(\epsilon_r)$ of 1300 and density of $7.78[g/cm^2]$, it was concluded that the 0.25wt% $CaCO_3$ addition composition ceramics sintered at $920^{\circ}C$ was suitable for ultrasonic vibrator application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.186-190
• /
• 2023

We studied the various characteristics of Sn-In (wt%) Pb-free solders for photovoltaic ribbon application. The solders near the eutectic composition of Sn₄₈In₅₂ (wt%) existed in InSn₄ and In₃Sn alloy phases, and in In crystal phase, but not in Sn crystal phase. In addition, the InSn₄ phase (γ-alloy) existed separately from the In₃Sn (β-alloy) and the In phase confirmed by an SEM-EDS-mapping. The melting temperature of the eutectic solder of Sn₄₈In₅₂ (wt%) was 119.2℃, and when the Sn content decreased in reference to the eutectic composition, it slightly increased to 121.4℃, but when the Sn content increased, it remained almost constant at 119.1℃. The peel strength of the ribbon plated with the Sn₄₂In₅₈ (wt%) solder was 38.7 N/mm², and it tended to increase when the Sn content increased. The peel strength of the eutectic Sn₄₈In₅₂ (wt%) solder was 53.6 N/mm², and that of the Sn₅₁In₄₉ (wt%) solder was 61.6 N/mm² that was the highest.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.277-284
• /
• 2004

Low carbon steels containing Si of up to $1.2\;wt\%$ were oxidized in air at 1373 K and 1523 K, i.e. below and above the eutectic temperature of FeO and $Fe_2SiO_4$. The influence of a impurity element, S on behavior of scale formation during oxidation was investigated by using $M\"{o}chssbauer$ spectroscopy and EDS. This allowed establishment of an interface oxidation model of Si-added steel depending on temperature and an impurity element. A compound of FeO and FeS was formed in the scale/matrix interface of low carbon steels containing S of up to $0.03\;wt\%$ oxidized above 1213 K of the eutectic temperature. This was flat formed between $Fe_2SiO_4$ nodules along the scale/matrix interface without selective oxidation. It is due to low viscosity and high wettability of the compound of FeO and FeS in liquid. Conventional metallographic examinations revealed that roughness of the scale/matrix interface in Si-added steels became flat as the content of S increased. It was independent of oxidizing temperature and Si content. Effects of oxidizing temperature and an impurity element content on descaling characteristics in Si-added steels were evaluated by using a hydraulic descaling simulator. Good descaling characteristics was attributable to this flatness of the scale/matrix interface.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.44-49
• /
• 2009

In this study, we performed urrban climate simulation how both the factor of environmental land and artificial factors influence on the formation of urban temperature. With deducing quantitative data, this study could get more accurate results of the urban temperature using urban climate simulation system. In the case of natural land cover, it appeared that there are effects on the lowering temperature and the lower temperature rate appeared in the water land cover on the whole. This is considered as temperature in water land was low because of the characteristics of water land having evaporation latent heat was high and convective sensible heat was low. In case of building which has building coverage ratio, 5% with 10 floors and building coverage ratio, 15 % with 6 floors, it appears that the temperature in the water land is $33.6^{\circ}C$. In case of building coverage ratio 5%, temperature dropped when buildings has more than 4 stories. This is regarded as the size of building is bigger, the temperature dropped in relatively because of the fluctuation of the rate of solar heat from the land. At the present time, the urban temperature are higher because of various artificial factors in the city. With these results, this study supposed to be a basies of the future studies for considering both the composition of building coverate ratio and floor plan.

• Fire Science and Engineering
• /
• v.16 no.4
• /
• pp.15-19
• /
• 2002

This dissertation is about the development of $BaTiO_3$-type PTC(Positive Temperature Coefficient) thermistor by composition method. A multilayer-type PTC samples were fabricated under optimal conditions after setting the experimental composition equation as ($Ba_{0.95-x}$S $r_{0.05}$$Ca_{x}$ )$TiO_3$-$0.01TiO_2$-$0.01SiO_2$-$\alpha$$MnCO_3$-$\beta$N $b_2$ $O_{5}$.) and their testing results were analyzed. The optimal sin-tering and cooling temperatures were 13$50^{\circ}C$ for two hours and $100^{\circ}C$/h for an hour, respectively; By composing Ca and Mn, dopants to lower the resistivity at room temperature, and Nb, a dopant to raise peak resistivity(Ca:5 mol%, Mn:0.08 mol%, Nb:0.18 mol%), appropriately, a PTC thermistor, having the characteristics of relatively low resistivity at room temperature and high peak resistivity and a good temperature coefficient, has been developed. And we find that it is possible of application for fire detection sensor.r.r.

• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.118-122
• /
• 2003

Alpha-SiAlON ceramics having various compositions and modifying cations were investigated with respect to their phase stability, transformation kinetics. and resulting microstructures. Each composition was heat treated at 150$0^{\circ}C$ for 1h and measured the $\alpha$-SiAlON transformation. The phase-boundary composition in the single-phase $\alpha$-SiAlON region showed sluggish transformation from $\alpha$-$Si_3N_4$ to $\alpha$-SiAlON compared to the phase-center composition in the diagram. Using the different rare earth modifying cations, dependence of transformation kinetics on the phase stability in a fixed composition was also explained. By changing size of the stable u-phase region with exchanging cations, systematic change in transformation was observed. Transformation rate of $\alpha$-SiAlON at low temperature has an important role on controlling the final microstructure. Less transformation gives more chances to develop elongated grain in the microstructure.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.794-798
• /
• 1996

Solid solutions of the nonstoichiometric Dy1-xSrxCoO3-y system with the compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been synthesized by the solid state reaction at 1000 ℃ under atmospheric air pressure. The crystallographic structures of the solid solutions are analyzed by the powder X-ray diffraction patterns at room temperature. The analyses assign the compositions of x=0.00 and 0.25 to the orthorhombic system with space group of Pbnm/D2h16, the compositions of x=0.50 and 0.75 to the tetragonal system like a typical SrCoO2.86, and the composition of x=l.00 or SrCoO2.50 to the brownmillerite type system with space group of I**a. The reduced lattice volumes increase with x value due to the larger radius of Sr2+ ion than that of Dy3+ ion. The mole ratio of Co4+ ion to total Co ion with mixed valence state between Co3+ and Co4+ ions at B sites or τ value has been determined by an iodometric titration. All the samples except for the DyCoO3 compound show the mixed valnce state and thus the composition of x=0.50 has the maximum τ value in the system. The oxygen vacancies increasing with x value are randomly distributed over the crystal lattice except for the composition of x=l.00 which have the ordering of the oxygen vacancies. The nonstoichiometric chemical formulas of the Dy1-xSrxCo3+1-τCo4+τO3-(x-τ)/2 system are formulated from the x, τ, and y values. The electrical conductivity in the temperature range of 100 to 900 K increases with τ value linearly because of positive holes of the Co4+ ions in π* band as a conducting carrier. The activation energy of the x=0.50 as Ea=0.17 eV is minimum among other compouds. Broad and high order transition due to the overlap between σ* and π* bands broadened by the thermal activation is observed near 1000 K and shows a low temperature-semiconducting behavior. Magnetic properties following the Currie-Weiss law show the low to high spin transition in the cobaltate perovskite. Especially, the composition of x=0.75 presents weak ferromagnetic behavior due to the Co3+-O2--Co4+ indirect superexchange interaction.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.4
• /
• pp.176-183
• /
• 2010

In order to understand the temporal variations and species composition of tintinnids, at two stations of the Korea Strait, this study was carried out from January to December 2007 (n=17). Fifty-one species from 22 genera were encountered: 27 neritic species (9 genera) and 24 oceanic species (14 genera). The species composition was different between two stations, and neritic species frequently appeared at St. 1, while oceanic species more frequently appeared at St. 2. According to the frequency in appearance of species, the most dominant species were neritic species such as Stenosemella nivalis and S. pacifica, that appeared in all seasons. Also, Acanthostomella norvegica, Amphorellopsis acuta, Epilpocyloides ralumensis, Protorhabdonella curta and other many oceanic species appeared intensively during the low salinity (${\leqq}33\;psu$) and high water temperature (${\geqq}24^{\circ}C$) period (July~October). The abundance of tintinnids ranged from 0 to 1,845 cells $L^{-1}$. It was higher in the seasons (summer and autumn) of low salinity and high water temperature than in other seasons. The abundance was relatively higher at St. 1 than at St. 2. On the basis of correlation and multiple regression analyses, the tintinnid abundance was not correlated with chi-a, but significantly correlated with water temperature and salinity, suggesting to be the primary abiotic factors influencing the abundance. This study suggests that the complex hydrographic conditions of the study area might influence the temporal distribution and species composition of tintinnids.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.568-577
• /
• 2017

Vegetables and fruits contain a great deal of vitamins, minerals, dietary fiber and phytochemicals. Therefore, healthconcious consumer prefer beverage made from fresh fruits and vegetables due to their health benefits. This study was conducted to investigate differences in nutritional composition and sensory characteristics of juices depending on the apparatus used: either a low-speed juicer or high-speed blender. All ingredients could be made into juice without addition of water using the low speed juicer. However, addition of water was necessary to produce juice with the high-speed blender. Phenol and flavonoid content, were higher in juice made with the low-speed juicer than that produced with the high-speed blender and were correlated with DPPH radical scavenging ability. Protease activity of pineapples juices was not significantly different for the two methods, but protease activity of kiwi juice was about 8 times higher in juice made with low-speed juicer than that made with the high-speed blender. SOD activity also tended to be higher in the juice made with low-speed juicer. The concentration of dissolved oxygen in the juice made with high-speed blender was higher than that of juice made with a low-speed juicer and was correlated with color change. In addition, the high-speed blender caused an increase juice temperature, but temperature was not changed during use of the low-speed juicer. The noise level of the low-speed juicer was low, but the high-speed blender had high noise intensity comparable to that of railway or aircraft noise. In the sensory evaluation of juice, juice made with the low-speed juicer was preferred over juice made with the high-speed blender. As a result, the overall quality of the juice produced using the low-speed juicer was superior.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.566-575
• /
• 2011

Since LPG (Liquefied petroleum gas) fuel supply system has an advantage of low emission characteristics, many studies have been conducted. In spite of the advantage of LPG supply system, a higher vapor pressure and lower viscosity than diesel or gasoline fuel may cause unstable running of fuel pump by the deterioration in lubrication performance and chemical reaction with rubber parts than that of diesel and gasoline fuel. Therefore its physical properties can cause the deterioration of durability. In this research, we developed an external type LPG pump which has the advantage of the price competitiveness and the convenient maintenance for LPLi system. The experiments were carried out in order to assess characteristics of the external type fuel pump at different fuel composition and temperature. As a result, there aren't any differences between internal and external type pump performance. It is observed that the same level of efficiency was maintained for both pumps as flow rate was increased with higher fuel temperature and more contents of propane in the fuel. And the pressure difference in LPLi system is maintained at constant with the various fuel compositions and temperatures due to their own characteristics of fuel supply system.