• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.77-86
• /
• 2005

Low temperature bonding of the silicon and glass using the Spin-on Glass (SOG) has been conducted experimentally to figure out the effects of the SOG solution composition and process variables on bond strength using the Design of Experiment method. In order to achieve the high quality bond interface without rack, sufficient reaction time of the optimal SOG solution composition is needed along with proper pressure and annealing temperature. The shear strength under the optimal SOG solution composition and process condition was higher than that of conventional anodic bonding and similar to that of wafer direct bonding.

• 천문학회보
• /
• 제43권1호
• /
• pp.63.3-63.3
• /
• 2018

A comparison study between two low temperature opacity tables has been conducted. The opacity is the one of the major input physics in stellar model construction. Opacity is generally provided in a tabular form and as a function of 3 parameters, ie, density, temperature and chemical composition. Among available opacity tables, it has been common practice to utilize OPAL opacity table (Iglesias & Rogers, 1996) augmented with Ferguson opacity table (Ferguson et al. 2005) for the low temperature domain. For low temperature domain, another table, AESOPUS (Marigo & Aringer, 2009), has been announced in 2007. Reportedly, this opacity covers even lower temperature region, and is compatible with that of Ferguson in the overlapping temperature domain. To test the compatibility, stellar models and isochrones for various ranges in mass, metallicity and chemical composition, have been constructed. It is confirmed that there is no significant difference in the stellar models and isochrones constructed with the two different low temperature opacities. Therefore, in the construction of stellar models and isochrones, Ferguson low temperature opacity can be replaced with the AESOPUS opacity. The wider range in the temperature and chemical mixtures, and the easier accessibility make AESOPUS favorable in practical purpose.

• 신재생에너지
• /
• 제5권2호
• /
• pp.9-14
• /
• 2009

Automobile Shredder Residue (ASR) is very appropriate in a gasification melting system. Gasification melting system, because of high reaction temperature over than $1,350^{\circ}C$, can reduce harmful materials. To use the gasification processes for hydrogen production, the high concentration of CO in syngas must be converted into hydrogen gas by using water gas shift reaction. In this study, the characteristics of shift reaction of the high temperature catalyst (KATALCO 71-5M) and the low temperature catalyst (KATALCO 83-3X) in the fixed - bed reactor has been determined by using simulation gas which is equal with the syngas composition of gasification melting process. The carbon monoxide composition has been decreased as the WGS reaction temperature has increased. And the occurrence quantity of the hydrogen and the carbon dioxide increased. When using the high temperature catalyst, the carbon monoxide conversion ratio ($1-CO_{out}/CO_{in}$) rose up to 95.8 from 55.6. Compared with average conversion ratio from the identical synthesis gas composition, the low temperature catalyst was better than the high temperature catalyst.

• ALGAE
• /
• 제19권3호
• /
• pp.247-255
• /
• 2004

This study was to clarify the variations in a marine ecosystem through examining the species composition of phytoplankton in the coastal water of Baegyado Island during winter. Water temperature, salinity, SS, NH$_4$-N, NO$_2$-N, NO$_3$-N and SiO$_2$-Si were significantly different and in inverse proportion to the chlorophyll a and species number according to stations and water depth. The total number of species was 88, composed of 94% Bacillariophyceae, 3.4% Chrysophyceae, 2.2% Dinophyceae and 1.1% Euglenophyceae. The dominant species were Rhizosolenia setigera, Skeletonema costatum and Stephanopyxis palmeriana. The maximum of standing crops was $5,450cells{\cdot}ml^(-1)$, while the minimum was $1,700cells{\cdot}ml^(-1)$. The coastal water was influenced with two water bodies which had characteristics of low water temperature - low salinity and high water temperature - high salinity.

• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.716-721
• /
• 2009

The major drive for the application of low-temperature plasma treatment in nitrocarburizing of austenitic stainless steels lies in improved surface hardness without degraded corrosion resistance. The low-temperature plasma nitrocarburizing was performed in a gas mixture of $N_{2}$, $H_{2}$, and carbon-containing gas such as $CH_{4}$ at $450^{\circ}C$. The influence of the processing time (5~30 h) and $N_{2}$ gas composition (15~35%) on the surface properties of the nitrocarburized layer was investigated. The resultant nitrocarburized layer was a dual-layer structure, which was comprised of a N-enriched layer (${\gamma}_N$) with a high nitrogen content on top of a C-enriched layer (${\gamma}_C$) with a high carbon content, leading to a significant increase in surface hardness. The surface hardness reached up to about $1050HV_{0.01}$, which is about 4 times higher than that of the untreated sample ($250HV_{0.01}$). The thickness of the hardened layer increased with increasing treatment time and $N_{2}$ gas level in the atmosphere and reached up to about $25{\mu}m$. In addition, the corrosion resistance of the treated samples without containing $Cr_{2}N$ precipitates was enhanced than that of the untreated samples due to a high concentration of N on the surface. However, longer treatment time (25% $N_{2}$, 30 h) and higher $N_{2}$ gas composition (35% $N_{2}$, 20 h) resulted in the formation of $Cr_{2}N$ precipitates in the N-enriched layer, which caused the degradation of corrosion resistance.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.52-58
• /
• 2004

Previous investigation results revealed that after the Low Temperature Plasma (LTP) treatment, the hydrophilicity of wool fiber was improved significantly. Such improvement enhances the wool dyeing and finishing processes which might be due to the changes of the wool surface to a more reactive one. In this paper, wool fibers were treated with LTP with different gases, namely, oxygen, nitrogen and gas mixture (25 % hydrogen/75 % nitrogen). Investigations showed that chemical composition of wool fiber surface varied differently with the different plasma gas used. The surface chemical composition of the different LTP-treated wool fibers was evaluated with different characterization methods, namely FTIR-ATR, XPS and saturated adsorption value. The experimental results were thoroughly discussed.

• 한국군사과학기술학회지
• /
• 제25권3호
• /
• pp.321-328
• /
• 2022

The current development tend of the gun propellants that they should have low sensitivity and high energy. We studied a nitrocellulose based propellant composition that replaced sensitive NG with RDX and DEGDN which high energy and low sensitivity. The important factors in the design of the gun propellant were impetus and flame temperature. NC-based propellant containing RDX showed similar impetus but low flame temperature compared to KM30A1, a triple-based propellant. The developed propellant composition didn't show any abnormal combustion reaction and the characteristics of ballistic resistance were also confirmed.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.262-267
• /
• 2015

We demonstrate the growth of single-walled carbon nanotubes (SWNTs) using ethylene-based chemical vapor deposition (CVD) and ferritin-induced catalytic particles toward growth temperature reduction. We first optimized the gas composition of $H_2$ and $C_2H_4$ at 500 and 30 sccm, respectively. On a planar $SiO_2$ substrate, high density SWNTs were grown at a minimum temperature of $760^{\circ}C$. In the case of growth using nanoporous templates, many suspended SWNTs were also observed from the samples grown at $760^{\circ}C$; low values of $I_D/I_G$ in the Raman spectra were also obtained. This means that the temperature of $760^{\circ}C$ is sufficient for SWNT growth in ethylene-based CVD and that ethylene is more effective that methane for low temperature growth. Our results provide a recipe for low temperature growth of SWNT; such growth is crucial for SWNT-based applications.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제42권1호
• /
• pp.14-20
• /
• 2021

Mulberry was dried with low temperature vacuum dryer using microwave. The nutritional compositions of microwave-dried mulberry including proximate composition, sugar content, mineral content, total phenolic, flavonoids, and anthocyanin, beta-carotene, vitamin C, and amino acid composition were measured. Sugar contents of mulberry were 42.6 mg/100g (Cheongilppong) and 43.27 mg/100g dw (Gwasang No. 2). The main components of mulberry sugars were fructose and glucose. Mineral analysis showed that K, P, Ca, and Mg were abundant regardless of mulberry cultivars.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.119-130
• /
• 1996

We review the factors which regulate the depth and composition of the human airway surface liquid (ASL). These include secretion from airway submucosal glands, ion and fluid transport across the surface epithelium, goblet cell discharge, surface tension and transepithelial gradients in osmotic and hydrostatic pressure. We describe recent experiments in which we have used low temperature scanning electron microscopy of rapidly frozen specimens to detect changes in depth of ASL in response to submucosal gland stimulation. We also present preliminary data in which X-ray microanalysis of frozen specimens has been used to determine the elemental composition of ASL.