• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.575-583
• /
• 2005

In this study the flow curve estimation is discussed using TANK model which is one of hydrologic models. The main interest is the accuracy of TANK model parameter estimation with respect to the sampling frequency of input data. For doing this, input data with various sampling frequencies is used to estimate model parameters. As a result, in order to generate relatively accurate flow curve, it is recommendable to measure stream flow at least every 8 days.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.9-21
• /
• 2021

In this study, fish and flow surveys were conducted at 12 survey points to calculate the fish habitat suitability index of Miho Stream in the Geum River Water System. The field surveys were conducted four times from September 2019 to May 2020. The results show the presence of 8 families, 37 species, and 5,754 individuals. The number of water purification species that preferred waters with a low flow rate was the highest. The habitat suitability index was calculated according to the Washington Department of Fish and Wildlife method based on the populations collected at various water depths and flow rate sections and the flow rate survey results. For the dominant species, Zacco platypus and swimming species, the results were compared by calculating at Gasan Bridge and Palgye Bridge at the upper stream. The single species showed no significant difference between the upstream and downstream at water depths of 0.1 - 0.5 m and flow rates of 0.2 - 0.5 m/s. The species swimming ability was similarly calculated at water depths of 0.2 - 0.5 m and flow rates of 0.2 - 0.5 m/s. The dominant species, Pyramid, had a wide range of physical habitats. The habitat suitability index between the swimming species was similarly calculated. These results can be effectively used as basic data for calculating the environmental ecological flow rate and establishing a river restoration plan of the Miho Stream.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• Korean Journal of Environmental Biology
• /
• v.26 no.3
• /
• pp.203-213
• /
• 2008

Benthic macro invertebrate communities were collected at six different sampling sites in the Musucheon stream in Korea from July 2006 to July 2007, and ecological exergy values were calculated based on five different functional feeding groups (collector-gatherer, collector-filterer, predator, scrapper, and shredder) of benthic macro invertebrates. Each sampling site was categorized to three stream types (perennial, intermittent and drought) based on the water flow condition. Exergy values were low at all study sites right after a heavy rain and relatively higher in the perennial stream type than in the intermittent or the drought stream type. Self-Organizing Map (SOM), unsupervised artificial neural network, was implemented to pattern spatial and temporal dynamics of ecological exergy of the study sites. SOM classified samples into four clusters. The classification reflected the effects of floods and droughts on benthic macroinvertebrate communities, and was mainly related with the stream types of the sampling sites. Exergy values of each functional feeding group also responded differently according to the different stream types. Finally, the results showed that exergy is an effective ecological indicator, and patterning changes of exergy using SOM is an effective way to evaluate target ecosystems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.58-65
• /
• 1994

In order to reduce particulate emissions from diesel vehicles, mathematical model is established and analyzed on ceramic wall-flow monolith filter. A wall-flow monolith filter placed in the exhaust stream of a diesel engine can effectively limit the emission of diesel particulates through the monolith. The accumulated particulates can then be periodically combusted inside the monolith by directing hot gas to the monolith while normal engine exhaust is routed around the monolith system. The resulting low flow rates through the monolith require consideration of gas dynamics through the channels as well as particulate combustion to analyze this regeneration process. A mathematical model of the regeneration is formulated as a system of nonlinear partial differential equations describing the conservation of mass, momentum and energy. Numerical solutions are obtained by using a finite difference techniques for the spatial discretization. So we can use filter simulation program for the purpose of filter design and actual filter regeneration

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.82-84
• /
• 2003

Watershed boundaries and flow paths within the watershed are the most important factors required in watershed analysis. Most often the derivation of watershed boundaries and stream network and flow paths is based on topographical maps but spatial variation of flow direction is not clearly understandable using this method. Water resources projects currently use 1: 50, 000-scale ground survey or aerial photography-based topographical maps to derive watershed boundary and stream network. In basins, where these maps are not available or not accessible it creates a real barrier to watershed geo-spatial analysis. Such situations require the use of global datasets, like GTOPO30. Global data sets like ETOPO5, GTOPO30 are the only data sets, which can be used to derive basin boundaries and stream network and other terrain variations like slope aspects and flow direction and flow accumulation of the watershed in the absence of topographic maps. Approximately 1-km grid-based GTOPO 30 data sets can derive better outputs for larger basins, but they fail in flat areas like the Karkheh basin in Iran and the Amudarya in Uzbekistan. A new window in geo-spatial hydrology has opened after the launching of the space-borne satellite stereo pair of the Terra ASTER sensor. ASTER data sets are available at very low cost for most areas of the world and global coverage is expected within the next four years. The DEM generated from ASTER data has a reasonably good accuracy, which can be used effectively for hydrology application, even in small basins. This paper demonstrates the use of stereo pairs in the generation of ASTER DEMs, the application of ASTER DEM for watershed boundary delineation, sub-watershed delineation and explores the possibility of understanding the drainage flow paths in irrigation command areas. All the ASTER derived products were compared with GTOPO and 1:50,000-based topographic map products and this comparison showed that ASTER stereo pairs can derive very good data sets for all the basins with good spatial variation, which are equal in quality to 1:50,000 scale maps-based products.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2020

This study was conducted as a basic research to create a sound and vital ecological environment in the city compared to the appearance characteristics of Gap stream(G-stream), which are the main stream of Banseok stream(B-stream), by analyzing the characteristics of waterbirds, including Wild Spot-billed Duck (S-Duck), that live in B-stream built as ecological stream. The waterbird survey was conducted by the line census for 3.2km, Jukdong-bridge to Jamiseon-bridge, from January to August 2018. The analysis of the survey was conducted with Relative species density(RD) of the emerging waterbird species, the Species diversity and Density Per Unit area for 100㎡(DPU). The waterbird survey results of B-stream was conducted 65 times. The five types of water birds that appeared during the survey were Spot-billed Duck(Anas poecilorhyncha), Teal(Anas crecca), Little Egret(Egretta garzetta), Great Egret(Egretta alba), and Grey Heron(Ardea cinerea). As a result, for S-Duck at B-stream, RD was 89.9%, monthly species diversity was simple as 0.3801 in January, 0.5943 in February and 0.3501 in August. The DPU of the S-Duck was 0.165/100㎡ in the B-Stream survey section which was 4.9 times higher than the main stream section, G-stream. The non-freezing zone of the city's small stream is expected to play an important role as a winter stop for wild birds such as S-Duck during the freezing period of the huge stream. For this reason, considering the ecological characteristics of wild waterbirds such as S-Duck when creating ecological stream, a: space and linear selection of waterways which can minimize the impact of natural enemy and increasing the number of walkers, b: management water-friendly plants in the low flow channel, c: arrangement walking-bicycle road will be necessary.

• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.33-44
• /
• 2003

Flow duration curves provide a compact summary of streamflow variability. In this study, characteristics of the dimensionless flow duration curve in natural rivers with the unregulated discharge were investigated. An analysis of flow duration characteristics was conducted with discharge data at stage-gauging stations of IHP representative basins and of the major rivers in Korea. Discharge characteristics are dependent on area of watershed. However, flow duration coefficients except drought duration coefficient are independent on that. Abundant flow duration coefficient was constant value. The coefficient of flow duration variability defined in this study as the ratio of the normal stream flow over the drought one is decreased with increasing of the watershed area, which implies that the watershed area affects the drought flow duration variability more than the low flow one. And the coefficient of flow duration variability is increased with the river gradient.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.52-60
• /
• 2013

Ejector-diffuser system makes use of high-pressure primary stream to entrain the low-pressure secondary stream through pure shear action between two streams. In general, the flow field in the ejector-diffuser system is highly complicated due to turbulent mixing, compressibility effects. A fatal drawback of the ejector system is in its low efficiency. Many works have been done to improve the performance of the ejector system, but not yet satisfactory. In the present study, a mixing guide vane was installed at the inlet of the secondary stream for the purpose of the performance improvement of the ejector system. A CFD method has been applied to simulate the supersonic flows inside the ejector-diffuser system. The present results obtained were validated with existing experimental data. The mixing guide vane effects are discussed in terms of the entrainment ratio, total pressure loss as well as pressure recovery.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.172-172
• /
• 2023

The use of low-cost IoT sensors for flow measurement in open channels has gained significant attention due to their potential to provide continuous and real-time data at a low cost. However, the accuracy and reliability of these sensors in real-world scenarios are not well understood. This study aims to compare the performance of low-cost IoT sensors in the laboratory and real-world conditions to evaluate their accuracy and reliability. Firstly, a low-cost IoT sensor was integrated with an IoT platform to acquire real-time flow rate data. The IoT sensors were calibrated in the laboratory environment to optimize their accuracy, including different types of low-cost IoT sensors (HC-SR04 ultrasonic sensor & YF-S201 sensor) using an open channel prototype. After calibration, the IoT sensors were then applied to a real-world case study in the Dorim-cheon stream, where they were compared to traditional flow measurement methods to evaluate their accuracy.The results showed that the low-cost IoT sensors provided accurate and reliable flow rate data under laboratory conditions, with an error range of less than 5%. However, when applied to the real-world case study, the accuracy of the IoT sensors decreased, which could be attributed to several factors such as the effects of water turbulence, sensor drift, and environmental factors. Overall, this study highlights the potential of low-cost IoT sensors for flow measurement in open channels and provides insights into their limitations and challenges in real-world scenarios.