• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.392-399
• /
• 2006

In order to develop a new persimmon pickle with a low salt concentration, changes in physicochemical characteristics during soaking of persimmon pickles treated with different organic acids and sugars were investigated at $15^{\circ}C$ for 70 days. The pH of persimmon pickles decreased from pH 6.64 at initial stage to pH 3.99 (control group), pH 2.76-3.33 (citric acid treatment, CT), and pH 3.08-3.34 (acetic acid treatment, AT) after 70-days of soaking. Titratable acidity of AT was higher (0.86-1.18%) than that of CT (0.61-0.78%). After 70-days of soaking, salinity of persimmon pickles treated with stevia leaf powder, sodium saccharin, sucrose, and isomalto-oligosaccharide were 4.94-4.96, 4.00-5.15, 2.99-3.31, and 3.03-3.30%, respectively, and 1.54-3.70% lower than that of the control group (6.69%). The hardness of persimmon pickles in all cases was increased up to 20-40-days of soaking and then decreased. L (lightness), a (redness), and b (yellowness) value of persimmon pickles treated with citric acid were higher than those of AT and the control group. Sensory evaluation of persimmon pickles after 70-days of soaking revealed that CT had the highest scores for color, texture, and overall acceptability. These results indicate that the salt concentration of persimmon pickles could be lowered by the addition of citric acid and various sugars during soaking.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.1-26
• /
• 1996

This study was performed to estimate the effects of cultured bone cell inoculated on porous type hydroxyaptite for the regeneration of the artificial alveolar bone defect. In this experiment 3 beagle dogs were used, and each of them were divided into right and left mandible. Every surgical intervention were performed under the general anesthesia by using with intravenous injection of Pentobarbital sodium(30mg/Kg). To reduce the gingival bleeding during surgery, operative site was injected with Lidocaine hydrochloride(l:80,000 Epinephrine) as local anesthesia. After surgery experimental animal were feeded with soft dietl Mighty dog, Frisies Co., U.S.A.) for 1 weeks to avoid irritaion to soft tissue by food. 2 months before surgery both side of mandibular 1st premolar were extracted and bone chips from mandibular body were obtained from all animals. Bone cells were cultured from bone chips obtained from mandible with Dulbecco's Modified Essential Medium contained with 10% Fetal Bovine Serum under the conventional conditions. Porous type hydroxyapatite were immerse into the high concentrated cell suspension solution, and put 4 hours for attachin the cells on the surface of hydroxyapatite. Graft material were inserted on the artificial bone defect after 3 days of culture. Before insertion of cellinoculated graft material, scanning electronic microscopic observation were performed to confirm the attachment and spreading of cell on the hydroxyapatite surface. 3 artificial bone defects were made with bone trephine drill on the both side of mandible of the experimental animal. First defect was designed without insertion of graft material as negative control, second was filled with porous replamineform hydroxyapatite inoculated with cultured bone marrow cells as expermiental site, and third was filled with graft materials only as positive control. The size of every artificial bone defect was 3mm in diameter and 3mm in depth. After the every surgical intervention of animals, oral hygiene program were performed with 1.0% chlorhexidine digluconate. All of the animals were sacrificed at 2, 4, 6 weeks after surgery. For obtaining histological section, tissus were fixed in 10% Buffered formalin and decalcified with Planko - Rycho Solution for 72hr. Tissue embeding was performed in paraffin and cut parallel to the surface of mandibular body. Section in 8um thickness of tissue was done and stained with Hematoxylin - Eosin. All the specimens were observed under the light microscopy. The following results were obtained : 1. In the case of control site which has no graft material, less inflammatory cell infiltration and rapid new bone forming tendency were revealed compared with experimental groups. But bone surface were observed depression pattern on defect area because of soft tissue invasion into the artificial bone defect during the experimental period. 2. In the porous hydroxyapatite only group, inflammatory cell infiltration was prominet and dense connective tissue were encapsulated around grafted materials. osteoblastic activity in the early stage after surgery was low to compared with grafted with bone cells. 3. In the case of porous hydroxyapatite inoculated with bone cell, less inflammatory cell infiltration and rapid new bone formation activity was revealed than hydroxyapatite only group. Active new bone formation were observed in the early stage of control group. 4. The origin of new bone forming was revealed not from the center of defected area but from the surface of preexisting bony wall on every specimen. 5. In this experiment, osteoclastic cell was not found around grafted materials, and fibrovascular invasion into regions with no noticeable foreign body reaction. Conclusively, the cultured bone cell inoculated onto the porous hydroxyapatite may have an important role of regeneration of artificial bone defects of alveolar bone.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.222-234
• /
• 2017

Green tides, which was mainly caused by Ulva spp., have been increasing in severity and frequency globally, and have negatively affected on marine ecosystems. This study was conducted to investigate effects of various physical and chemical factors on the death of Ulva australis (ULAUS) and to consider a practical measures useful for alleviating Ulva bloom. Soaking of ULAUS thalli in pure water for 8 hr didn't induce a death, but incubation in 1.0-1.5% salinity for 7 d inhibited sporulation by about 70%. Desiccation gave rise to a serious damage when more than 40-50% of initial fresh weight was lost. ULAUS growth was sensitive to temperature and seriously inhibited from more than $30^{\circ}C$. At $35^{\circ}C$, $40^{\circ}C$, $45^{\circ}C$ and $50^{\circ}C$, treatment time required for 90-95% death of ULAUS thalli was 1 d, 10 min, 30 sec, and 1 sec, repectively. ULAUS growth was seriously inhibited at lower than pH 6.0 and completely dead at pH 4.0. Several compounds for ULAUS control was selected and the chemcals causing a rapid death were oxidants such as hydrogen peroxide and sodium percarbonate. Taken together, our results suggest that low salinities, dryness, pH, high temp. and compounds could be selected for Ulva bloom control, and high temperature and compounds seems to be useful for a development of practical control methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.6
• /
• pp.428-434
• /
• 2005

For the purpose to verify the grain and evaluate milling properties of Korean waxy wheat, com­parison analysis between waxy wheat lines and their respective maternal parents were performed. The waxy lines showed various grain yields of 4.76${\~}$5.79 t/ha depending on parentages, which were corresponding to $80{\~}96\%$ levels of their respective maternal parents. One thousand grain weights of waxy lines were also lighter than its respective part in its parentage by exhibiting 32.8${\~}$34.6 g compared to 32.9${\~}$45.2 g of their parents. Test weights of waxy lines and their parents were 720${\~}$798 g/l and 786${\~}$797 g/l, respectively. The proportions of the grains above 2.5 mm in width were higher in order of Keumgang, Olgeuru, Geuru, SW97134, Suwon 292, Woori, SW97105, and SW97110. Waxy lines exhibited low milling properties by showing the straight flour yields ranging from $61.8\%$ to $67.1\%$ compared with the yields of their parents ranging from $66.1\%$ to $72.5\%$; the waxy lines were significantly lower in first break flour (Bl) and first reduction flour (Rl) yields in the Buller test mill, while significantly higher in the yields of second and third reduction flour (R2 and R3) than the respective ones of their parent wheat.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• Food Science and Preservation
• /
• v.20 no.5
• /
• pp.659-667
• /
• 2013

This study was performed to determine the effects of the blanching condition (immersion ratio 1:15 (w/v) for 3 min at $95^{\circ}C$, and solution containing 1% sodium chloride) and selected forming agents (dextrin DE=10, dextrin DE=20, ${\beta}$-cyclodextrin; each forming agents added 5%) on the phytochemical compounds and quality characteristics of Ligularia fischeri leaves. The moisture was not affected by the forming agent. The color of a, b and chroma values were low in the blanching treatment groups and were significantly lowest with ${\beta}$-cyclodextrin (CD). The polyphenol and flavonoid contents in the blanching treatment groups were higher than those in the non-blanching-treatment group. The ascorbic acid content was higher in the non-blanching-treatment group and was significantly highest in the group treated with dextrin (DE=10) whereas the blanching treatment groups showed lower dehydroascorbic acid content than the non-blanching-treatment group. The water absorption was higher in the non-blanching-treatment group and was significantly highest in the group treated with CD. The water solubility in the blanching treatment groups treated with dextrin (DE=20) and CD was higher than that in the blanching treatment group treated with DE=10. The total chlorophyll and chlorophyll a and b contents were high in the blanching treatment group treated with CD, and for the total carotenoid contents, the same tendency as that seen with the chlorophyll content was observed. With regard to the particle diameter, those in the blanching treatment groups were lower than that in the non-blanching-treatment group and was significantly lowest in the blanching treatment groups treated with DE=20 and CD. The result of SEM observation showed that the spray-dried powders in blanching treatment groups treated with the DE=20 and CD forming agents had uniform particle distribution.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.811-818
• /
• 2016

The purpose of this study was to investigate changes in the amino acid content and physicochemical properties of Cheonggukjang prepared by using various soybean cultivars (Daewon, Deapung, Seadanbeak, and Taekwang) and a functional microorganism (Bacillus subtilis HJ18-9). These soybeans were conventional Cheonggukjang (control) and Cheonggukjang fermented with Bacillus subtilis HJ18-9 (treated). The moisture contents of steamed, control, and treated soybean were 62.45~67.12%, 63.28~67.14%, and 64.50~66.87%; amino-type nitrogen contents were 6.53~24.25 mg%, 27.63~122.09 mg%, and 37.29~133.48 mg%; and ammonia-type nitrogen contents were 26.92~47.95 mg%, 45.45~156.36 mg%, and 28.02~121.13 mg%, respectively. The umami taste associated with several amino acids (aspartic acid and glutamic acid) in Cheonggukjang was lower than that for steamed soybeans, while the bitter taste from amino acids (methionine, valine, isoleucine, leucine, and phenylalanine) was higher than that for steamed soybeans. The result of sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that the molecular weight of steamed soybeans was less than 100 kDa, while control and treated groups showed low molecular weights below 34 kDa, confirming their protein hydrolysis to small molecular weight. These results are information for developing functional fermented soybean paste and diversification using soybean cultivars.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.3
• /
• pp.269-275
• /
• 2008

The avocado is a widely grown and consumed fruit that is high in nutrients and low in calories, sodium, and fats. In this study, antioxidant activities and induction of apoptosis by methanol extracts from sarcocarp, seed and peel of avocado were investigated in vitro. Contents of total polyphenols in methanol extracts from sarcocarp, seed and peel were 13.89, 137.12 and $223.45{\mu}g/mg$ respectively. Radical-scavenging activities of the methanol extracts were examined by using ${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl (DPPH) radicals and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) assay. The methanol extracts from the peel of avocado showed higher scavenging activities against DPPH, ABTS than those from sarcocarp and seed. Apoptosis in MDA-MB-231 cells mediated by the methanol extracts of avocado was associated with the increase of activation of caspase-3 and caspase-3 target protein, PARP. Therefore, with more researches on identification and action mechanism of active compounds, the methanol extracts from peel and seed of avocado is expected to be a natural source for the developments of functional food and medical agents to prevent human breast cancer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.555-563
• /
• 2004

The pH of beverages is known to be low and have, therefore, been implicated in the increasing incidence of erosion. Erosion is believed to be the predominant cause of teeth wear in children and young adults, although there will always be a contribution from attrition and abrasion. The aim of the present study was to evaluate the effect of yogurt on the progression of erosive demineralization in human enamel using demineralization model in vitro. In 4 yogurts, available on the market, pH, buffering capacity and the concentrations of calcium, phosphate and fluoride were determined. The buffering effect was determined by titration with NaOH. 50 milliliters of each drink was then titrated with 1M sodium hydroxide, added in 0.5 milliliters increments, until the pH reached about 7. Human deciduous enamel(n=40) samples were divided into four groups and exposed to 80ml of the yogurt for 30,60, 90 and 120min. Enamel surface microhardness(VHN) was examined before and after each exposure. 1. The average PH of fermented milk was 3.77 and this pH value was acidic enough to cause tooth erosion. 2. All of the fermented milks were found to be erosive(p<0.05) 3. The teeth exposed to the fermented milk all showed erosion like lesions and microhardness measurements showed that enamel surface hardness decreased proportionately with increased time of immersion in all tooth specimen groups. 4. After immersion for 30 and 60 minutes, reduction rate of microhardness values was not significantly different between the groups(p>0.05). However, after 90 and 120 minutes, reduction rate of each group was significantly different(p<0.05).