• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.762-770
• /
• 2010

The researches about energy efficieny of wireless sensor MAC protocol is an issue in present days. Therefore, MAC and routing protocols for reducing energy consumption at sensor nodes is needed. In this study, a low-power MAC protocol for sensor network is proposed, which in based on X-MAC by exploiting virtual synchronization. The virtual synchronization technique lets senders postpone packet transmission until receivers' wake-up time, so that senders transmit only one or two short preambles. Using NS-2, a proposed MAC protocol improve the energy efficiency by 10% compared with the X-MAC protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.115-120
• /
• 2013

There are lots of vulnerability and chance to be attacked in wireless sensor networks, which has many applications. Among those attacks, sybil attack is to generate a lot of false node and to inject false information into networks. When a user uses such false information without recognizing the attack, there might be a disaster. Although authentication method can be used to protect such attack, the method is not a good choice in wireless sensor networks, where sensor nodes have a limited battery and low power. In this paper, we propose a novel method to detect sybil attack with a little extra overhead. The proposed method use the characteristics that there is a weak connection between a group of normal nodes and a group of false nodes. In addition, the method uses energy aware routing based on random routing and adds a little information into the routing. Experimental results show that the proposed method detects false node by more than 90% probability with a little energy overhead.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1098-1104
• /
• 2010

Recently, a variety of research of multi-hop routing protocol have been done to balance the sensor node energy consumption of WSN(wireless sensor network) and to improve the node efficiency for extending the life of the entire network. Especially in multi-hop protocol, a variety of models have been concerned to improve energy efficiency and apply in the reality. In multi-hop protocol, we assumption that energy consumption can be adjusted based on the distance between the sensor nodes. However, according to the physical property of the actual WSN, it's hard to establish this assumption. In this dissertation, we propose low-power sub-cluster protocol to improve the energy efficiency based on the spread of distance. Compared with the previous protocols, this proposed protocol can be effectively used in the wireless sensing networks.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.306-311
• /
• 2017

In the future ubiquitous network, information will collect data from various sensors in the field. Since the sensor nodes are equipped with small, often irreplaceable, batteries with limited power capacity, it is essential that the network be energy-efficient in order to maximize its lifetime. In this paper, we propose an effective network routing method that can operate with low power as well as the transmission of data and information obtained from sensor networks, and identified the number of sensors with the best connectivity to help with the proper placement of the sensor. These purposes of this research are the development of the sensor middle-ware to integrate the maritime information and the proposal of the routing algorithm for gathering the maritime information of various sensors. In addition, for more secure ship navigation, we proposed a method to construct a sensor network using various electronic equipments that are difficult to access in a ship, and then construct a communication system using NMEA(the national marine electronics association), a ship communication standard, in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.66-75
• /
• 2016

Due to aggressive scaling of device sizes and reduced noise margins, physical defects caused by aging and process variation are continuously increasing. Additionally, with scaling limitation of metal wire and the increasing of communication volume, fault tolerant method in manycore network-on-chip (NoC) has been actively researched. However, there are few researches investigating reliability in NoC with voltage-frequency-island (VFI) regime. In this paper, we propose a table-based routing technique that can communicate, even if link failures occur in the VFI NoC. The output port is alternatively selected between best and the detour routing path in order to improve reliability with minimized hardware cost. Experimental results show that the proposed method achieves full coverage within 1% faulty links. Compared to $d^2$-LBDR that also considers a routing method for searching a detour path in real time, the proposed method, on average, produces 0.8% savings in execution time and 15.9% savings in energy consumption.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.792-803
• /
• 2005

Ultra wide band (UWB) technology will be applied in the high rare wireless personal area networks (WPANs) for its high rate, low power, and innate immunity to multipath fading. In this paper, a power aware multi-hop packet relay MAC protocol in UWB based WPANs is proposed and a power aware path status factor (PAPSF), which is derived from SINR and power resource condition of each device, is used to select a suitable relay node. Compared with relaying by piconet coordinator (PNC), which is easily chosen by other ad hoc routing protocol, the new scheme can achieve hi임or throughput, decrease the time required for transmitting high power signal and we can easily distribute the battery power consumption from PNC to other devices in the piconet to prevent the PNC device using up its battery too fast and finally avoid PNC handover too frequently.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.71-78
• /
• 2009

It is very difficult to apply previous security protocols to WSNs(Wireless Sensor Networks) directly because WNSs have resource constrained characteristics such as a low computing ability, power, and a low communication band width. In order to overcome the problem, we proposes a secure group communication scheme applicable to WSNs. The proposed scheme is a combined form of the TEEN(Threshold sensitive Energy Efficient sensor Network protocol) clustering based hierarchical routing protocol and security mechanism, and we assume that WSNs are composed of sensor nodes, cluster headers, and base stations. We use both private key and public key cryptographic algorithms to achieve an enhanced security and an efficient key management. In addition, communications among sensor nodes, cluster headers, and base stations are accomplished by a hierarchical tree architecture to reduce power consumption. Therefore, the proposed scheme in this paper is well suited for WSNs since our design can provide not only a more enhanced security but also a lower power consumption in communications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.196-201
• /
• 2018

Recently, various infrastructure-less IoT networking schemes have been studied to construct local IoT networks based on self-organization. This is, because RPL protocol, which is to support infrastructure based network construction is used to construct local IoT networks. Thus, a self-organization networking and ad hoc path between client and server in local IoT networks is not supported in basis RPL protocol. In this paper, we propose a self-organization networking scheme which support infrastructure-less based IoT network construction in low-power and lossy network based IoT environments consisting of IoT devices with the constrained feature, such as low power, the limited transmission rate and low computing capacity. Through simulation, we show that the proposed self-organization networking scheme improves the performance, in terms of the number of packets generated for end-to end data transmission and the end-to-end delay, compared to basis RPL protocol.