• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.857-860
• /
• 1991

This paper describes a High-Speed 8-bit Current-Mode BiCMOS A/D Converter. The characteristics of this A/D Converter are as fellows. First, as ADC is operating in current-mode we can obtain the properties of increase of converting speed, low noise, and wideband. Second, the properties of high switching speed in bipolar transistor and of high packing density, low power consumption in MOS trnsistor are combined. Finally we reduce chip area by designing it with subranging mode and improve the converting speed by performing subtraction directly, which doesn't need D/A convertings, using current switching element. This converter is composed of two 4-bit ADC, current soure array which provides signal and reference current, current comparator and encoding network.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.139-142
• /
• 2003

Location information of individual nodes is useful for routing and some other functions in wireless sensor networks. Each node can use GPS to know its position. However, the GPS service can not be practical to use due to cost efficiency, power, and computing capability. This paper proposes the localization method to make nodes know their location in case of a few nodes knows their position information. The proposed method is named as VALT (Virtual Anchor based Localization using Triangulation method). It uses the virtual anchor concept and calculates the location of individual nodes by means of the triangulation method. This method helps all nodes to determine their position with low cost and high scalability.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.910-917
• /
• 2016

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to the sink node to pass collected data. However, the communication distance of the sensor nodes at low cost and at low power is not long, it requires a data transfer through the multi-hop to transmit data to the sink node. In the existing cluster-based sensor network studies, cluster process and route selection process are performed separately in order to configure the routing path to the sink node. In this paper, in order to use the energy of the sensor nodes that have limited resources efficiently, a cluster-based multi-hop routing protocol which merges the clustering process and routing process is proposed. And the proposed method complements the problem of uneven cluster creation that may occur in probabilistic cluster methods and increases the energy efficiency of whole sensor nodes.

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.295-295
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.81-85
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.119.4-119
• /
• 2001

It is the advantage of PLC that digitalization and networking of existing facility can be organized at low price because there is no need further construction of communication line considering that home appliance, information device and various kind of control devices are digitalized at low price. Moreover, AMR(Automatic Meter Reading) is very attractive to utility company because not only does it reduce the cost of reading meter, but also it can control and monitor the demand for energy. So, it can solve the consumers problem best and easily. It also can be easily realized that the utilities can expand there areas to values-added service through existing network. The performance of the PLC modem which is being developed now is not moven enough and much more test for outdoor modem is needed especially. Therefore, we, KEPRI, concentrate our efforts on configuring AMR system for test and investigation of the actual performance of various kinds ...

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.11-15
• /
• 2002

3 V, 2.46GHz Low Noise Amplifier (LNA) have been designed for standard 0.35$\mu\textrm{m}$ CMOS process with one poly and four metal layers. This design includes on-chip biasing, matching network and multilayer spiral inductors. The single-ended amplifier provides a forward gain of 20.5dB with a noise figure 3.35dB, and an IIP3 of -6dBm while drawing 59mW total Power consumption

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.34-38
• /
• 2012

The recent increase in use of the IEEE 802.15.4 standard for wireless connectivity in personal area networks makes of it an important technology for low-cost low-power wireless personal area networks. Studies showed that voice communications over IEEE 802.15.4 networks is feasible by Guaranteed Time Slot (GTS) allocation; but there are some constraints to accommodate voice transmission beyond two hops due to the excessive transmission delay. In this paper, we propose a GTS allocation scheme for bidirectional voice traffic in IEEE 802.15.4 multihop networks with the goal of achieving fairness and optimization of resource allocation. The proposed scheme uses a greedy algorithm to allocate GTSs to devices for successful completion of voice transmission with efficient use of bandwidth while considering closest devices with another factor for starvation avoidance. We analyze and validate the proposed scheme in terms of fairness and resource optimization through numeral analysis.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.989-993
• /
• 2007

It was intended in this study to seek for the measures to utilize the USN technique, which has high usability due to low price and low power consumption, in air quality monitoring. As a method, the sensors of temperature, humidity, particulate matters (PM10), and carbon dioxide ($CO_2$) were installed in the self-manufactured sensor nodes; the nodes were installed in the waiting rooms and platforms of a subway station and the measurements were collected at real time with use of a computer which micro gateway was built in. Collected data was to be processed by the statistics program installed in the computer; the collected data is to be used in managing the air quality of stations after transmission to the ventilation system of ventilation chambers.