• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1526-1531
• /
• 2009

RFID Reader IC에 응용하기 위한 저전압 특성의 5차 일립틱 CMOS Gm-C 필터를 설계하였다. 설계된 필터는 CMOS 자기바이어스 차동 트랜스컨덕터를 설계하여 구성하였으며 차동 트랜스컨덕터는 기존의 자기 바이어스 차동증폭기의 이득특성을 개선하기 위하여 병렬형으로 구성되었다. 설계된 필터는 RFID 리더용 저전압 필터 설계사양에 따라 1.8V의 저전압으로 동작이 가능하도록 설계되었다. 1.8V, 0.18${\mu}m$CMOS 공정 파라미터를 사용하여 HSPICE 시뮬레이션 결과, 설계된 5차 일립틱 저역 필터가 설계사양인 1.35MHz의 차단주파수를 만족함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.850-853
• /
• 1987

A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.63-68
• /
• 2005

In this paper, Coplanar Waveguide(CPW) low-pass filter with the spurious-reduced is designed by using Defected Ground Structures(DGS). Two different LPF unit cells and DGS pattern are combined to reduce the spurious. In comparison to a conventional step impedance LPF, the size of proposed LPF as 17.2mm*6.8mm is several times smaller. The simulation and measurements confirm that spurious characteristics is presented less than -30dB($S_{21}$) to three times cut off frequency.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.117-120
• /
• 2010

A novel stepped-patch loaded coplanar waveguide(SPLCPW) structure is proposed and applied to the design of a low-pass filter(LPF). The stepped-patch loaded on the opposite side of the CPW plane is shown to provide a shunt-connected series L-C resonance, which is dual to that of a conventional CPW defected ground structure(DGS). As a simple example of the proposed SPLCPW circuit, a 3-pole SPLCPW LPF is designed and good results are obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1621-1623
• /
• 2005

The input chattering in the sliding mode control (SMC) is alleviated through a low pass filter. When the low pass filter is added to the original system, the overall system including the low pass filter dynamics can not satisfy the matching condition. So the integral SMC is applied for a main controller. A sliding surfaces are designed carefully to make the overall dynamics same with the nominal control system.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.462-466
• /
• 2007

This paper proposes an automatic bandwidth control method for the performance improvement of Binary Amplitude Shift Keying (BASK) system for Giga-Bit Modem in millimeter band. In order to improve the performance of the BASK system with a fixed bandwidth, the proposed method is to adjust a bandwidth of low pass filter in receiver using the fuzzy system. The BASK system consists of a high speed shutter of the transmitter and a counter and a repeater of receiver. The repeater consists of four stage converters, and a converter is constructed with a low pass filter and a limiter. The inputs to the fuzzy system are the reminder and integral of remainder of counter, and output is a bandwidth. We used a Viterbi algorithm to find the optimum detection from the output of the counter. Simulation results showed that the proposed system improves the performance compared to the fixed bandwidth.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.387-392
• /
• 2014

In this paper, a size-reduced Wilkinson balun with wide harmonic-suppressed band is presented. An accurate analysis of the parallel coupled line with an open stub (PCL-OS) is carried out. The PCL-OS structure shows excellent low pass filter and harmonic-suppression characteristics, which is useful for designing a low pass filter unit cell (LUC) with a reduced size. The designed Wilkinson balun at a 2.45 GHz center frequency not only shows an excellent harmonic suppression including the 5th harmonics up to 14 GHz over 15 dB, but it also has an area reduced to 48% of the conventional one.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권8호
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• 한국컴퓨터정보학회논문지
• /
• 제5권3호
• /
• pp.76-83
• /
• 2000

CMOS기술의 발전에 의해 연속신호시스템은 상당한 발전을 가져왔다. 이 논문에서는 새로운 CMOS floating저항을 써서 저역통과필터를 설계하고 PSpice Simulation을 통하여 그 특성이 우수함을 입증하였다. 특히, CMOS로 구성되는 새로운 floating저항은 포화영역에서 동작하도록 구현하였다. 이 방법으로 설계된 저역통과필터는 SC필터보다 구조가 더 간단하므로 IC화 할 때 칩 면적을 감소시킬 수 있다.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.9-14
• /
• 2012

본 논문에서는 신호 분리와 합성이 가능한 다이플렉서를 설계 제작한 후 특성을 비교 분석하였다. 저역 통과 필터와 고역 통과 필터의 특성을 정합하여 다이플렉서로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호 분리와 합성의 가능성을 입증하기 위해 실제 마이크로 스트립 구조로 제작하여 측정한 결과 다이플렉서의 저역통과 필터는 -0.4 dB의 삽입손실과 -30 dB의 반사손실, 1.6 GHz의 차단수파수 특성을 보였고 고역 통과 필터는 -0.8 dB의 삽입손실과 약 -30 dB의 반사손실, 1.9 GHz의 차단수파수 특성을 갖는 것을 확인할 수 있었다.