• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.641-646
• /
• 2003

In this study, a series of electrokinetic(EK) remediation experiments are carried out under the different degree of saturation for contaminated soil with lead. for constant electrical potential, the final current of all the sample represents the similarity to steady-state value of 5∼7mA. Under conditions of all the degree of saturation the anode reservoir becomes acidic(pH as low as 3) while the cathode reservoir is basic(pH as high as 12). But pH changes in the sample is a little and decontamination efficiency is the low.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.30-37
• /
• 2018

석회암 기반 지반 등에 존재하는 수중공동의 보강을 위해 사용할 수 있는 석고 혼입 저 pH형 수중불분리 그라우트에 대한 기초 실험을 수행하였다. 다양한 종류의 배합을 설계하였으며 이 배합들의 유동성, 강도, 환경영향성을 평가하였다. 유동성은 자연유하, 가압유하의 두 가지 조건에 대해 평가하였다. 강도는 기중 및 수중 주입의 경우에 대해 각각 측정하였다. 환경영향성은 현탁액의 pH 및 현탁물질 농도 두가지로 평가되었다. 석고혼입을 통해 pH를 10 이하로 감소시켰으며, 포틀랜드 시멘트-규사-석고 간의 배합비 및 수중불분리제-유동화제 혼입량의 변화을 통해 모르타르 자유흐름량 7-10 cm, 압축강도 4 MPa 이상의 수중불분리 그라우트 배합을 찾아내었다.

• KSBB Journal
• /
• 제19권3호
• /
• pp.221-225
• /
• 2004

Bacillus sp. 유래의 Bacillus polyfermenticus SCD를 Bisroo $t^{ⓡ}$라고 부르고, 이것은 생균제로서 산업적으로 매우 유용하다. 본 연구에서는 B. polyfermenticus SCD를 산업적으로 활용성을 증대시키기 위해 three layer coating법을 사용하여 인공위액의 pH 변화에 대한 안정성과 열안정성, glucose 농도에 따른 안정성을 연구하였다. 그 결과 코팅한 B. polyfermenticus SCD가 인공위액에 대한 내성에서는 배양 4시간을 기준으로 pH 2는 30%, pH 4는 20%, pH 6은 14% 상승효과가 있었음을 알 수 있었고, 온도변화에 대한 안정성에서는 코팅한 B. polyfermenticus SCD가 8$0^{\circ}C$에서 2시간 기준으로 안정성이 약 40% 증진됨을 확인할 수 있었다. 고농도 (30%)의 glucose에서 코팅한 B. polyfermenticus SCD는 안정하였으며, 코팅하지 않은 것보다 약 50% 안정성이 증대됨을 확인할 수 있었다. 그리고 pH 4.0에서는 코팅한 B. polyfermenticus SCD는 코팅을 하지 않은 B polyfermenticus SCD보다 전체적으로 생존율이 40% 이상, pH 6.0에서는 생존율이 42% 이상 증진됨을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.280-284
• /
• 1985

Kinetic measurements of the 5-nitrofurfural-hydrazine reaction in various pH ranges of aquous solution were carried out by ultraviolet spectrophotometry at $25^{\circ},\;35^{\circ}\;and\;45^{\circ}C$. The observed rate of the reaction varies with the change in pH, which gives characteristic "bell-type" rate acidity profile. The maximum rate is shown in the vicinity of pH 4. This reaction procceds with rate-determining attack of hydrazine on the 5-nitrofurfural at low pH and undergoes a change in rate-determining step to dehydration of the addition intermediate as pH increases. The reaction has a "reactant-like transition state" which precedes intermediate in low pH and "product-like transition state" which follows it in neutral pH. The geometry of 5-nitrofurfural-hydrazine intermediate was estimated with PCILO method associated with CNDO/2 scheme.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.375-384
• /
• 2005

To investigate the flow-accelerated corrosion (FAC) dependency of carbon steel (A106 Gr. B) and low-alloy steels (1Cr-1/2Mo, 21/4Cr-1Mo) on pH, orifice distance, and material, experiments were carried out. These experiments were performed using a flow velocity of 4 m/sec (partly 9 m/sec) at pH $8.0\~10.0$ in an oxygen-free aqueous solution re-circulated in an Erosion-Corrosion Test Loop at $130^{\circ}\;{\ldots}$ for 500 hours. The weight loss of the carbon steel specimens appeared to be positively dependent on the flow velocity. That of the carbon and low-alloy steel specimens also showed to be distinguishably dependent on the pH. At pH levels of $8.0\~9.5$ it decreased, but increased from 9.5 to 10.0. Utility water chemistry personnel should carefully consider this kind of pH dependency to control the water system pH to mitigate FAC of the piping system material. The weight loss of the specimens located further from the orifice in the distance range of $6.8\~27.2$ mm was shown to be greater, except for 21/4Cr-1Mo, which showed no orifice distance dependency. Low alloy steel specimens exhibited a factor of two times better resistance to FAC than that of the carbon steel. Based on this kind of FAC dependency of the carbon and low-alloy steels on the orifice distance and material, we conclude that it is necessary to alternate the composition of the secondary piping system material of NPPs, using low-alloy steels, such as 21/4Cr-1Mo, particularly when the system piping has to be replaced.

• 한국식품조리과학회지
• /
• 제12권1호
• /
• pp.54-59
• /
• 1996

Immunoglobulins (IgY) were isolated from egg yolk of hens immunized with bovine serum albumin(BSA). The stability of anti-BSA IgY against heat and pH was investigated. Antibody activity was measured by enzyme linked immunosorbent assay. IgY was relatively heat-stable and most of the antibody activity remained after heating up 65$^{\circ}C$ for 30 minutes. IgY was stable at pH 5-11. However, inactivation of IgY was observed below pH 4, or above pH 12. Inactivation of IgY proceeded rapidly at low pHs(pH 2-3). Most of the antigen binding activity was lost at low pHs probably because of some conformational changes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.434-437
• /
• 2005

Chemical Mechanical Polishing (CMP) has become an essential step in the overall semiconductor wafer fabrication technology. In general, CMP is a surface planarization method in which a silicon wafer is rotated against a polishing pad in the presence of slurry under pressure. The polishing pad, generally a polyurethane-based material, consists of polymeric foam cell walls, which aid in removal of the reaction products at the wafer interface. It has been found that the material removal rate of any polishing pad decreases due to the so-called 'pad glazing' after several wafer lots have been processed. Therefore, the pad restoration and conditioning has become essential in CMP processes to keep the urethane polishing pad at the proper friction coefficient and to allow effective slurry transport to the wafer surface. Diamond pad conditioner employs a single layer of brazed bonded diamond crystals. Due to the corrosive nature of the polishing slurry required in low pH metal CMP such as copper, it is essential to minimize the possibility of chemical interaction between very low pH slurry (pH <2) and the bond alloy. In this paper, we report an exceptional protective coated conditioner for in-situ pad conditioning in low pH Cu CMP process. The protective Cr-coated conditioner has been tested in slurry with pH levels as low as 1.5 without bond degradation.

• 한국해양학회지
• /
• 제1권1_2호
• /
• pp.1-6
• /
• 1966

A latitudinal, differential pH distribution is observed in the Northeastern Pacific Ocean with a pH range of 8.15 at high latitude (42 N) to 8.29 at low latitude (23 N). These pH values are generally greater than the calculated equilibrium pH with respect to atmospheric carbon dioxide. If we assume that the calculated equilibrium pH values ae valid, then the surface waters are undersaturated with respect to the atmospheric carbon dioxide during April to June 1966. A high surface pH value of about 8.26 was observed immediately south of the SubarcticBoundary zone near 170 W. This value differs from the equilibration pH by as much as 0.1 unit.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.944-949
• /
• 2003

본 논문에서는 InCaP/GaAs HBT공정을 이용하여 낮은 DC 파워소모, 낮은 NF, 낮은 IMD 와 광대역 특성을 갖는 Ku-band LNB용 이중평형믹서를 설계하였다. 제작된 믹서는 3 V, 16 mA 의 U조건과 -23 dBm의 RF입력 조건하에서 5 dB의 변환이득, 14 dB의 NF, 17.9 GHz의 대역폭 그리고 50.34 dBc의 IMD특성을 얻었다. 낮은 IMD 특성, 광대역폭, 낮은 파워소모 특성은 InGaP/GaAs HBT의 선형성과 광대역 입력 정합기법과 바이어스 점의 최적화를 통해 얻을 수 있었다.

• 공업화학
• /
• 제32권2호
• /
• pp.190-196
• /
• 2021

저품질 석회석의 탈황 성능 개선을 알아보기 위해 초산, 젖산, 개미산 등 3종의 유기산 첨가제를 사용하여 기포형 반응기에서 탈황 반응을 수행하였다. 유기산이 첨가되지 않은 석회석 슬러리는 pH 5.2 이하에서 초기 탈황 효율의 저하가 일어났다. 반면, 유기산이 첨가된 석회석 슬러리는 pH 4.2~4.5에서 안정된 초기 탈황 효율을 나타내었다. 슬러리 pH 4 이하에서 유기산이 첨가된 석회석 슬러리의 탈황 성능은 유기산의 해리에 의해 생성된 음이온의 양과 연관될 수 있다. 슬러리 중 유기산의 음이온 양이 많으면 슬러리 pH의 완충 기능 저하가 급격히 일어나지 않았다. 이와 같은 결과들은 유기산의 산성도 및 해리도에 기인하였다. 3종의 유기산 첨가에 따른 저품질 석회석 슬러리의 탈황 성능 증가율은 초산(2.6%) < 젖산 (6.4%) < 개미산 (16.7%) 순으로 나타났다.