• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.448-454
• /
• 2021

This study was conducted to the effect of low air temperature and light intensity conditions on yield and quality of tomato at the early stage of growth in Korea. Inplastic greenhouses, low temperature and low temperature with shade treatments were performed from 17 to 42 days after plant. Tomato growing degree days were decreased 5.5% due to cold treatment during the treatment period. Light intensity decreased 74.7% of growing degree days due to shade. After commencing treatments, the plant growth decreased by low temperature and low radiation except for height. Analysis of the yield showed that the first harvest date was the same, but the yield of the control was 3.3 times higher than low temperature with shade treatment. The cumulative yields at 87 days after transplanting were 1734, 1131, and 854 g per plant for control, low temperature, and low temperature with shade, respectively. The sugar and acidity of tomatoes did not differ between treatment and harvesting season. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of the photosynthetic rate. The results showed that the maximum photosynthetic rate, J (electric transportation rate), TPU (triose phosphate utilization), and R_d (dark respiration rate) did not show any difference with temperature, but were reduced by shading. Vcmax (maximum carboxylation rate) was decreased depending on the low temperature and the shade. Results indicated that low temperature and light intensity at the early growth stage can be inhibited the growth in the early stage but this phenomenon might be recovered afterward. The yield was reduced by low temperature and low intensity and there was no difference in quality.

• Korean Journal of Ichthyology
• /
• v.19 no.3
• /
• pp.185-192
• /
• 2007

The present experiment was carried out to study the effects of light intensity on growth, survival, caudal fin shape, body composition, skin color and blood component of river puffer, Takifugu obscurus. Four light intensities (0, 500, 1,000, 2,000 lx) were tested in duplicates for 60 days. Specific growth rate (SGR), daily feeding rate (FR) and food coefficient (FC) were reduced following to the decrease of light intensity. However in survival rate there was not significantly different among groups. The damage extent of caudal fin was increased in more strong light intensity. In body composition, moisture and crude protein were only significantly difference according to light intensity. In body color, L and a were the highest in 0 lx. In blood analysis, the content of AST, ALT, GLU significantly increased in more powerful the intensity groups. It is concluded that the supplement of low light intensity (e.g. 0 lx) recommended for the commercial scale aquaculture of river puffer in land-based tank without growth and survival retardation.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.493-500
• /
• 1998

To investigate the effects of light intensity on the growth, and the critical minimum light intensity for growing of Cornus controversa seedlings at the stage of cotyledon, hypocotyl elongation, cotyledon expansion, the times of leaves appearance, dry weights of each organ, and specific leaf area(SLA) were measured on a growth chamber with several light intensity gradients(385, 32, 17, 8, and $5{\mu}mol\;m^{-2}s^{-1}$). There was a positive correlationship between the size of cotyledon and the biomass of cotyledon and total seedling. Hypocotyl was more elongated under relatively low light intensities, such as 32, 17, 8, and $5{\mu}mol\;m^{-2}s^{-1}$ than under $385{\mu}mol\;m^{-2}s^{-1}$ light intensity, however, dry weight of the hypocotyl was adverse. As the light intensities decreased, the leaf appearance was delayed and the number of leaves decresed. In addition, leaves did not appear under $8{\mu}mol\;m^{-2}s^{-1}$ and $5{\mu}mol\;m^{-2}s^{-1}$ light intensity. Although cotyledons were more fully expanded under 32 and $17{\mu}mol\;m^{-2}s^{-1}$ light intensities than $385{\mu}mol\;m^{-2}s^{-1}$ light intensity, the dry weights of cotyledons were greater under the high light intensity. The dry weight of cotyledon, hypocotyl, root and leaves showed a decreased pattern with decreasing light intensities, but root to shoot(hypocotyl+leaves) ratio rapidly increased. Roots did not develop below $8{\mu}mol\;m^{-2}s^{-1}$ light intensity. In conclusion, the results showed that the critical minimum light intensity for growing of Cornus controversa seedlings was above $17{\mu}mol\;m^{-2}s^{-1}$ light intensity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.85-91
• /
• 2004

The purpose of this study was to observe in vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. The kinds of light-curing sources were plasma arc light(P), low heat plasma arc light, traditional low intensity halogen light, low intensity LED(L-LED), and high intensity LED(H-LED). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. Occlusal cavities$(2{\times}2{\times}1.5mm)$ were so prepared in extracted human premolars as to the remaining dentin thickness was 1mm. Dentin adhesive was applied to all cavities. Experimental groups consisted of no base group, ionomer glass base group, and calcium hydroxide base group. Temperature before and after resin filling was measured. Temperature at the light guide tip was the highest with P and the lowest L-LED. Temperature before resin filling was the highest with H-LED and the lowest with L-LED. Temperature after resin filling was the highest with H-LED and the lowest with L-P and with L-LED. The lining of base partially reduced the temperature rise.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.25-30
• /
• 2012

This study examined the use of LIT (lock-in infrared thermography) to detect defects in the welded parts of ships and offshore structures. A quantitative analysis was used with the filtering and texture measurement of image processing techniques to find the optimized experimental condition. We verified the reliability of our methods by applying image processing techniques in order to normalize the evaluations of comparative images that showed a phase difference. In addition, it was found that a low to mid-range intensity of light exposure on the surface showed good results, whereas high exposure did not provide significant results. A lock-in frequency of around 0.1 Hz was satisfactory regardless of the intensity of the light source. In addition, making the integration time of the thermography camera inversely proportional to the intensity of the exposed light source during the experiment provided good results.

• Restorative Dentistry and Endodontics
• /
• v.28 no.2
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.459-465
• /
• 2014

Visible light communications (VLC) using the intensity modulation of light-emitting diodes (LEDs) provides a new communication medium to overcome the shortage of radio spectrum, and allows reuse of LED lighting infrastructures. Orthogonal frequency-division multiplexing (OFDM) was introduced to VLC for its merits in mitigating the fading effects resulting from delay spread, and in avoiding low-frequency ambient interference. Noise and clipping are two major factors that degrade the performance of OFDM in VLC. A larger signal easily overcomes noise, but experiences impairment by clipping. Therefore, degradation due to clipping has a trade-off relationship with that due to noise, depending on the signal amplitude of OFDM. In this paper, the optimal signal amplitude in the trade-off is obtained by simulation when the dimming and LED intensity are given. The former indicates a user's requirement for lighting, and the latter represents the channel quality. The required LED intensity-to-noise ratio, as the channel quality that guarantees dimming as well as an adequate bit-error rate (BER), is also discussed.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.59-66
• /
• 1997

The relationship between Mg II emission line and light variation of V711 Tau has been derived to investigate the chromospheric activity on V711 Tau. First, a shape of an optical light curve was compared with that of ultraviolet constructed from the IUE low resolution spectra. Second, the intensities of Mg II k emission lines have been reduced from IUE high resolution spectra. The intensity of Mg II k line was compared with brightness of the UV light curve at given phase. The Mg II line intensity is maximum at the phase $O.^{P}4$ where the light is minimum. The evidence of chromosperic activity is indicated by the intensity variation of the MgII emission line with orbital phase for V711 Tau.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.563-572
• /
• 2012

Unlike water applications, the photocatalytic technique utilizing light-emitting-diodes as an alternative light source to conventional lamp has rarely been applied for low-level indoor air purification. Accordingly, this study investigated the applicability of UV-LED to annular-type photocatalytic reactor for removal of indoor-level benzene and toluene at a low concentration range associated with indoor air quality issues. The characteristics of photocatalyst was determined using an X-ray diffraction meter and a scanning electron microscope. The photocatalyst baked at $350^{\circ}C$ exhibited the highest photocatalytic degradation efficiencies(PDEs) for both benzene and toluene, and the photocatalysts baked at three higher temperatures(450, 550, and $650^{\circ}C$) did similar PDEs for these compounds. The average PDEs over a 3-h period were 81% for benzene and close to 100% for toluene regarding the photocatalyst baked at $350^{\circ}C$, whereas they were 61 and 74% for benzene and toluene, respectively, regarding the photocatalyst baked at $650^{\circ}C$. As the light intensity increased from 2.4 to 3.5 MW $cm^{-1}$, the average PDE increased from 36 to 81% and from 44% to close to 100% for benzene and toluene, respectively. In addition, as the flow rate increased from 0.1 to 0.5 L $min^{-1}$, the average PDE decreased from 81% to close to zero and from close to 100% to 7% for benzene and toluene, respectively. It was found that the annular-type photocatalytic reactor inner-inserted with UV-LEDs can effectively be applied for the decomposition of low-level benzene and toluene under the operational conditions used in this study.

• Journal of Environmental Science International
• /
• v.5 no.5
• /
• pp.643-656
• /
• 1996

Various light intensity and light quality were treated to oat seedlings to investigate the effect of light on the chlorophyll accumulation and the formation of chlorophyll-protein complexes. The Increase of total chlorophyll accumulation and Chl (chlorophyll) a/b ratio was promoted under H (high intensity) white light during oat chloroplast development when compared to 1 (low intensity) white light. Also H white light was more effective in the formation of chlorophyll-protein complexes associated with PSI CCI and CCII than L white light. The seedlings grown in various right quality caused little changes in total chiorophyl and ChI-a/b ratio when compared to those grown in L white light. The assembly of LHCII trimer was more affected by L white light treatment in the formation of-chlorophyll-protein complexes than red light treatment. The effect of blue light on the relative composition of chlorophyll-protein complexes was similar to that of L white light. Particualrly, blue light was more effective in the synthesis of LHCII monomer than the other light quality at the early stage of greening. When compared to red light, blue light was more effective the increase of chlorophyll accumulation and Chl a/b ratio than 1ight Quality, and light Quality may be in important factor for the regulation of the organization in the chlorophyll-protein complexes curing greening.