• Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.97-104
• /
• 2021

Background: Asarum sieboldii Miq., a species of forest understory vegetation, is an herbaceous perennial belonging to the family Aristolochiaceae. The metapopulation of A. sieboldii is distributed sparsely and has a short seed dispersal distance by ants as their seed distributor. It is known that many flowers of A. sieboldii depend on self-fertilization. Because these characteristics can affect negatively in genetic structure, investigating habitat structure and assessment of genetic structure is needed. A total of 27 individuals in a valley were sampled for measuring genetic diversity, genetic distance, and genetic differentiation by RAPDPCR. Results: The habitat areas of A. sieboldii metapopulation were relatively small (3.78~33.60 m²) and population density was very low (five to seven individuals in 20×20 m quadrat). The habitat of A. sieboldii was a very shady (relative light intensity = 0.9%) and mature forest with a high evenness value (J = 0.81~0.99) and a low dominance value (D = 0.19~0.28). The total genetic diversity of A. sieboldii was quite high (h = 0.338, I = 0.506). A total of 33 band loci were observed in five selected primers, and 31 band loci (94%) were polymorphic. However, genetic differentiation along the valley was highly progressed (G_st = 0.548, N_m = 0.412). The average genetic distance between subpopulations was 0.387. The results of AMOVA showed 52.77% of variance occurs among populations, which is evidence of population structuring. Conclusions: It is expected that a small-scale founder effect had occurred, an individual spread far from the original subpopulation formed a new subpopulation. However, geographical distance between individuals would have been far and genetic flow occurred only within each subpopulation because of the low density of population. This made significant genetic distance between the original and new population by distance. Although genetic diversity of A. sieboldii metapopulation is not as low as concerned, the subpopulation of A. sieboldii can disappear by stochastic events due to small subpopulation size and low density of population. To prevent genetic isolation and to enhance the stable population size, conservative efforts such as increasing the size of each subpopulation or the connection between subpopulations are needed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.283-287
• /
• 2011

In this study, fine $Gd_2O_2S$:Tb powder was synthesized by using a low temperature solution-combustion method for a high-resolution digital x-ray imaging detector. From the fabricated phosphor power, the fine scintillator films was fabricated by particle sedimentation method and was investigated the luminescent property. From the experimental results of relative light output as a function of terbium concentration, the highest luminescent efficiency has at 5 wt% Tb concentration, and luminescent intensity decreased rapidly according to quenching effect about higher Tb concentration. Also, the relative light output of $270{\mu}m$-$Gd_2O_2S$:Tb film has 2945 pC/$cm^2$/mR. And light intensity was saturated at higher film thickness. Finally, to evaluate an image acquisition performance of fabricated phosphor, images were obtained by using commercial CMOS sensor and measured the MTF, NPS, and DQE. DQE(0 lp/mm) of fine phosphor film has 37%. But, DQE improvement of fine phosphor film is possible by resolving problem of film fabrication process and has a significant potential in the application of digital radiation imaging system later.

• Microbiology and Biotechnology Letters
• /
• v.29 no.4
• /
• pp.227-233
• /
• 2001

To maximize astaxanthin (3,3'-dihydroxy-$\beta\beta$'carotene-44'-dione) production by high density Haematococcus pluvialis cultures, various, media were examined Among tested media, \`Hong Kong Medium and Modified Bolds Basal Medium showed the best result for cell growth ( $2.0$\times$10^{ 6}$cells /mL) and for astaxanthin content per cell (9.7 mg astaxanthin mg/g cell), respectively, Maximum astasanthin concentration of 6.1mL was obtained at pH 7.5, $20^{\circ}C$~$25^{\circ}C$ Deficiencies of nitrogen source($NaNO_3$ and proteose-peptone) found to simulate astaxanthin formation Relatively low light inten- sity of $60\mu$E ($\m^2$s) was sutiable for vegetative cell growth while higher light intensity was required for higher astaxanthin accumulation.

• Applied Biological Chemistry
• /
• v.27 no.1
• /
• pp.34-39
• /
• 1984

Environmental effects of light. temperature, and pH of culture media on mycelial growth and fruit-body formation of Flammulina velutipes in synthetic media were investigated. Illumination inhibited mycelial growth, but illumination during the latter part of vegetative growth induced primordia formation. The optimum light intensity and exposure time were $100{\sim}1000$ lux and $4{\sim}8$ hours per day, respectively. High intensity of light was injurous, and in darkness primordia developed into very poor fruit-bodies. The optimum temperature was $25^{\circ}C for mycelial growth and $15^{\circ}C$ for fruit-body formation. The optimum pH range for mycelial growth was found to be from 5.0 to 7.0 and for fruit-body formation from 5.0 to 6.0. In low temperature treatments, a temperature of $15^{\circ}C$ was more effective than $5^{\circ}C\;or\;10^{\circ}C$, it took about 12 hours for primordium formation, but at $5^{\circ}C\;or\;10^{\circ}C$ about 48 hours. The most excellent fruit-body formation were produced from the mycelium growth for 7 to 10 days.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.1-11
• /
• 2007

Light is an environmental component inevitably regulating photosynthesis and photo-morphogenesis, which are involved in the plant growth and development. Studies were conducted at the International Rice Research Institute, Philippines in 2004 and 2005, with aims to investigate 1) morphological responses of rice plants to low radiation, 2) morphological alteration of shade-grown plants when exposed to high light intensity, and 3) photosynthetic responses of shade-grown rice plants. Reduction in solar radiation by 40% induced increases in the area on a single leaf basis, biomass partitioning to leaves, and chlorophyll meter readings but brought about retardation of tiller development and decrease in above-ground biomass production of rice varieties. When the shade-grown plants from two weeks of transplanting to panicle initiation were exposed to full solar radiation after panicle initiation, they demonstrated less increase in chlorophyll meter readings and more decrease in leaf nitrogen concentrations from panicle initiation to flowering than control plants that were grown under the ambient solar radiation for whole growth period after transplanting. Shade-grown rice plants exhibited lower carbon assimilation rates but higher internal $CO_2$ concentrations on a single leaf basis than control plants, when measurements for shade-grown rice plants were made under the shading treatments. But when the measurements for shade-grown plants were made under the full solar radiation, light-saturated carbon assimilation rates were similar to control plants. Response of photosynthetic rates to varying light intensities was not considerably different between shading treatments and control. Yield reduction was observed in the shading treatments from panicle initiation to flowering and from flowering to physiological maturity, mainly by less spikelets per panicle and poor grain filling, respectively.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.132-137
• /
• 2008

This experiment was conducted to investigate the effect of supplemental lighting of low light intensities on growth and yield of rose 'Vital' in a forcing culture. Metal halide lamp (MH), High pressure sodium lamp (HSP), and MH+HSP were used as the light sources, and they were set up at a $310\;cm{\times}450\;cm$ interval and at 120cm above the culture beds. Light intensity at 1m point distance from supplemental lighting sources was $32{\sim}34\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Days to the 1st and 2nd harvests decreased by $5{\sim}8$ and $3{\sim}5$days, respectively in supplemental lighting treatment as compared to the control. Days to harvesting was the shortest in MH+HPS treatment, followed by BPS and MH, although there was no significant difference between HPS and MH treatments. The growth was better and incidence of blind shooting decreased by $5{\sim}7%$ in supplemental lighting treatments than the control, increasing marketable cut flowers. The incidence of blind shoot was the lowest in MH+BPS treatment, and there were no significant difference between MH and BPS treatments. In conclusion, supplemental lighting of low light intensities was effective in reducing days to flowering and reduced occurrence of blind shoots.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.760-769
• /
• 2016

This paper proposes a hybrid LED driving circuit and its control method for extension of the color gamut of LED. The proposed hybrid LED driving circuit provides the constant current by switching regulation in the high current and by linear regulation in the low current through LED. Furthermore, the magnitudes of the high current and low current were controlled by CC(Continuous Current) control method and PWM(Pulse Width Modulation) control method, respectively. We experimentally confirmed that the current through RGB LED is linearly controlled to 2% maximum current ratio by varying PWM in the proposed driving circuit and control method. As a result of the measurement of the output light color in CIE1976 chromaticity coordinates, we confirmed that the color, which not be expressed by the existing method, uniformly expressed. We confirmed that the color, which can not be expressed by the existing method, was uniformly output and verified that the color gamut was expanded by the low current controlled by the proposed driving circuit and control method.

• Wind and Structures
• /
• v.35 no.4
• /
• pp.255-268
• /
• 2022

Light-weight or low-damped structures may encounter the unsteady galloping instability that occurs at low reduced wind speeds, where the classical quasi-steady assumption is invalid. Although this unsteady phenomenon has been widely studied for rectangular cross sections with one side perpendicular to the incidence flow, the effect of the mean wind angle of attack has not been paid enough attention yet. With four sectional models of different side ratios and geometric shapes, the presented research focuses on the effect of the wind angle of attack on unsteady galloping instability. In static tests, comparatively strong vortex shedding force was noticed in the middle of the range of flow incidence where the lift coefficient shows a negative slope. In aeroelastic tests with a low Scruton number, the typical unsteady galloping, which is due to an interaction with vortex-induced vibration and results in unrestricted oscillation initiating at the Kármán vortex resonance wind speed, was observed for the wind angles of attack that characterize relatively strong vortex shedding force. In contrast, for the wind angles of attack with relatively weak shedding force, an "atypical" unsteady galloping was found to occur at a reduced wind speed clearly higher than the Kármán-vortex resonance one. These observations are valid for all four wind tunnel models. One of the wind tunnel models (with a bridge deck cross section) was also tested in a turbulent flow with an intensity about 9%, showing only the atypical unsteady galloping. However, the wind angle of attack with the comparatively strong vortex shedding force remains the most unfavorable one with respect to the instability threshold in low Scruton number conditions.

• Korean Journal of Environmental Biology
• /
• v.36 no.2
• /
• pp.117-123
• /
• 2018

In this study, the efficiency of photosynthetic electron transfer according to LED color temperature was verified in order to find a way to efficiently grow trees under night illumination. The experiment was carried out with White treatment, Warmwhite treatment, and non-treatment with donarium cherry. The study uses to a method for analyzing and evaluating the color temperature of an LED light source by photochemical analysis. We found that all treatments 115 DAT of maximum fluorescence amount(P) had the lowest. In the treatment using white light and the Warm-white light, the T amount of florescence of the late stage during the transition of the J-I level was increased, and the photosystem I electron transfer efficiency was decreased. Therefore, the electron transport efficiency of $RE1_O/CS$ and RE1o/RC were reduced. Especially, compared to Warmwhite, the light intensity increased greatly in the white-light treatment, The $PI_{TOTALABS}$ of 7 DAT was the highest value, but it was decreased to the lowest value on 115 DAT. This study has shown that the white treatment was low in electron transfer efficiency and soundness. Warmwhite-light treatments showed lower stress.