• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.271-279
• /
• 2014

As an alternative way to overcome the weakness of the global navigation satellite system (GNSS) in hostile situation, a gravity gradient referenced navigation (GGRN) has been developed. This paper analyzed the performance of GGRN with respect to the initial errors, DB resolution as well as update rates. On the basis of simulations, it was found that the performance of GGRN is getting worse when initial errors exist but the navigation results are rapidly converged. Also, GGRN generates better results when DB resolution is higher and update rates are shorter than 20 seconds. However, it is difficult to deduce the optimal parameters for the navigation because some trajectories show better performance in case low-resolution DB is applied or long update rate is supposed. Therefore, further analysis to derive specific update conditions to improve the performance has been performed. Those update conditions would not be generalized for all cases although maximum improvement rate is over 200% in certain case. In the future, some more developments and tests on the combination of various geophysical data and/or algorithms are necessary to construct more stable and reliable navigation system.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.285-287
• /
• 2001

We have studied the nonlinear evolution of a magnetized disk of isothermal gas, which is sustained by its self-gravity. Our objective is to investigate how the Jeans, Parker, and convective instabilities compete with each other in structuring/de-structuring large scale condensations in such disk. The Poisson equation for the self-gravity has been solved with a fourth-order accurate Fourier method along with the Green function, and the MHD part has been handled by an isothermal TVD code. When large wavelength perturbations are applied, the combined action of the Jeans and Parker instabilities suppresses the development of the convection and forms a dense core of prolate shape in the mid-plane. Peripheral structures around it are filamentary. The low density filaments connect the dense core to the diffuse upper region. On the other hand, when small wavelength perturbations are applied, the disk develops into an equilibrium state which is reminiscent of the Mouschovias's 2-D non-linear equilibrium of the classical Parker instability under an externally given gravity.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.137-144
• /
• 1997

The effcct of specific g~avity cont~olled In the .range fiom O.4 to 0.7 by particle size and added amount of A1 powder in the presence or absence of water repellent agent on the physical properties of ALC was examined to evaluate frost resistance and durability. The compressive sttcngth and the tensile strength are increased and independency with water repellent agent when the specific gravity is increased in the range from 0.4 to 0.7. According as the added amount of water repellent agent was increased. frost resistance was improved and absorption ratio was decreased. ALC produced from fine Al powder has a low volume reduction by scaling and a sound apperance after freezing/thawing test and top surface freezing test.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.171-174
• /
• 2015

Four pluriparous Korean black goat does were superovulated with FSH and mated with fertile bucks. Anesthetized animals were placed in lateral recumbency, then size 8 Foley catheter was inserted into the uterus through the cervix under the vaginal speculum and the balloon was inflated to fix the catheter in the uterine body. The opposite end of the catheter was connected to a 3-way and a flushing medium was infused into the uterus. Modified Dubecco's PBS with 1% FBS was used as the flushing medium. Four goats were allocated in two groups depending on the type of medium infusion into uterus. Injection group; the flushing medium was injected into uterus and the infused medium was collected by to-and-fro method using a syringe. Gravity-flow group; the flushing medium was allowed to enter the uterus by gravity flow by lifting the medium bottle and drained out of the uterus into a collecting tube. All four goats had catheter inserted through the cervix and uteri flushed successfully. The volume (recovery rate) of recovered medium varied considerably from 87 ml/200 ml (43.5%) to 148 ml/160 ml (92.5%). Nine embryos/ova in total were recovered from Gravity-flow group goats. Although the embryo recovery rate was low, the possibility of a transcervical embryo recovery in Korean black goat had been proven in this preliminary experiment.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.33-38
• /
• 2016

Purpose - This study purposes to analyze the impact of regional economic integration and macroeconomic on Indonesian FDI inflows. Research design, data, and methodology - Data were collected from bilateral relation between Indonesia and 21 home countries whose dominant share FDI to Indonesia from 2005 to 2013. Analysis method was conducted by panel gravity modeI to find the impact of regional economic integration and macroeconomic on Indonesian FDI inflows. Results - The empirical results show that GDP of the home country and Indonesia have a positive impact on Indonesia FDI. Distance and home country real interest rate have a negative impact on Indonesia FDI. Economic integration of European Union (EU) and Indonesia's cooperation with Japan in ASEAN-Japan Comprehensive Economic Partnership (AJCEP) have created impact of investment creation on Indonesia FDI, unfortunately, economic integration of ASEAN has created impact of investment diversion on Indonesian FDI. Conclusions - In order to increase FDI inflow to Indonesia, Indonesia government should improve the physical and social infrastructures to drive the productivity and economic efficiency. It will increase the GDP and also attract more investors. Low interest rate policy should be considered.

• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.283-291
• /
• 2004

To find out the locus of the Quinling-Dabie-Sulu continental collision’s boundary and to estimate underground structure of the sedimentray basin in the Yellow Sea, three dimensional density modelling is carrid out by using gravity dataset (Free Air Anomaly), which is measured by Tamhae 2, KIGAM in a period between 2000 and 2002. The measured gravity anomaly in the investigations area is mainly responsed by depth and density differences between the sedimentary basin and the basement. The high density model-bodies extend mainly from the southern part of China to the middle-western part of the Korean Peninsula, which might be emplaced along the continental collision’s boundary. The total volume of the very low density model-bodies might be expected at about 20,000 km3 in the model area.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.104-108
• /
• 2014

The recent Fukushima nuclear power plant accidents shows that the core make up at high RCS pressure condition is very important to prevent core melting. The core make up flow at high pressure condition should be driven by gravity force or passive forces because the AC-powered safety features are not available during a Station Black Out (SBO) accident. The reactor Coolant System (RCS) mass inventory is continuously decreased by releasing steam through the pressurizer safety valves after reactor trip during a SBO accident. The core will be melted down within 2~3 hours without core make up action by active or passive mode. In the new design concept of a Hybrid Safety Injection Tank (Hybrid SIT) both for low and high RCS pressure conditions, the low pressure nitrogen gas serves as a charging pressure for a LBLOCA injection mode, while the PZR high pressure steam provides an equalizing pressure for a high pressure injection mode such as a SBO accident. After the pressure equalizing process by battery driven initiation valve at a high pressure SBO condition, the Hybrid SIT injection water will be passively injected into the reactor downcomer by gravity head. The SBO simulation by MARS code show that the core makeup injection flow through the Hybrid SIT continued up to the SIT empty condition, and the core heatup is delayed as much.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.53.2-53
• /
• 2003

• Journal of the Korean Professional Engineers Association
• /
• v.21 no.4
• /
• pp.12-18
• /
• 1988

On the foundation work of Po-Ryong power plant #3 & #4. It was 30meters away from the running states of #1 & #2 plant site. In order to protect the #1 & #2 power plant facilities & factory structure. Allowable vibration was required below 0.07 gal. Therefore, it had to set up the anti-vibration trench to reduce the vibration reference and secondary. I applied the low gravity and low velocity explosives with M/S delay caps by cautious blasting pattern.