• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.363-372
• /
• 2002

Reducing the fat content of processed meat products can be performed by (1) using leaner raw meat materials (2) inducing non-meat ingredients that serve to replace a portion or all of the fat, and (3) applying new ingredient combinations, technologies or processing procedures that decrease the fat and cholesterol content of meat products. Low-fat meat products were manufactured with Int replacers which were food ingredients that had the functional and sensory properties of fat without contributing fat calories, resulting in lower fat(<3%) content. Added water, non-meat proteins, carbohydrates, such as starch and hydrocolloids(gums) and vegetable oils have been used as typical fat replacers to be used in meat products. In addition, fat substitutes included structural lipids, sucrose polyester and ingredient combinations. Formulations for the manufacture of low-fat meat products in combined with new technologies have focused on the use of fat replacer combinations that contributes a minimum of calories and not detrimental to flavor, juiciness, mouthfeel or textural traits expected more traditional products. In conclusion, some combinations of fat replacements that mimics the flavor, mouthfeel and textural characteristics of fat offer potential for further development of low-fat meat products to have similar characteristics of regular-fat counterparts.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.475-481
• /
• 1998

This study was conducted to investigate the possibility for low fat press ham which was made without fat added. Four kinds of press ham were prepared ; Apork 70%, fat 0% ; low fat press ham), B(pork 60%, fat 10%), C(pork 55%, fat 15%) and D(pork 50%, fat 20%). The press ham samples were stored at 4$\pm$2$^{\circ}C$. The physic chemical properties of press hams were analyzed during storage 60 days at 4$^{\circ}C$. The contents of moisture(71.3%) and crude protein (23.4%) of low press ham were higher than those of other products, and crude fat content (2.8%) was remarkably lower(p<0.5). The water holding capacity of press ham was higher than other products. Hunter's L(61.6) and b-value(5.9) of low fat press ham were lower than other products, but a-value(11.7) was higher. Hardness (70.2 dyne/cm), springiness(85%), chewiness(0.49kg), gumminess (2.0kg) and brittleness (0.7kg) of low fat press ham were higher than those of other products, but cohesiveness was lower than D product. Aroma and texture of low fat press ham were inferior to other, but taste and palatability of that were superor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.588-595
• /
• 2003

The optimum level of fresh granulated low-calcium (0.2%) skim milk co-precipitate, as fat substitute in low-fat ground pork patties was determined on the basis of physico-chemical, cooking and sensory properties. Low-fat ground pork patties (<10% total fat), formulated with 15 per cent water, 4 per cent added fat, 1.5 per cent salt and 4-10 per cent milk co-precipitate, were evaluated for proximate composition, cooking characteristics and compared with control patties with 15 % added fat. The moisture and protein content of raw and cooked low-fat patties were significantly (p<0.05) higher than control. The incorporation of milk co-precipitate in low-fat patties improved cooking yield, fat and moisture retention and reduced shrinkage. The sensory properties of low-fat patties were comparable with control patties. The overall acceptability of low-fat patties formulated with 7% milk co-precipitate was significantly (p<0.05) higher than patties with 10% level and non-significantly (p<0.05) higher than low-fat patties containing 4% milk co-precipitate and control. Instrumental Texture Profiles of developed low-fat patties and control patties were comparable with slight increases in hardness and gumminess of the low-fat product. The developed low-fat ground pork patties (7% milk co-precipitate) had lower TBA values, better microbiological and sensory refrigerated storage stability than high-fat control patties packaged in air permeable films for 21 days.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.252-259
• /
• 2015

The present study was conducted to investigate the efficacy of sweet potato powder (SPP) and water as a fat replacer in low-fat pork patties. Low-fat pork patties were developed by replacing the added fat with combinations of SPP and chilled water. Three different levels of SPP/chilled water viz. 0.5/9.5% (T-1), 1.0/9.0% (T-2), and 1.5/8.5% (T-3) were compared with a control containing 10% animal fat. The quality of low-fat pork patties was evaluated for physico-chemical (pH, emulsion stability, cooking yield, $a_w$), proximate, instrumental colour and textural profile, and sensory attributes. The cooking yield and emulsion stability improved (p<0.05) in all treatments over the control and were highest in T-2. Instrumental texture profile attributes and hardness decreased, whereas cohesiveness increased compared with control, irrespective of SPP level. Dimensional parameters (% gain in height and % decrease in diameter) were better maintained during cooking in the low-fat product than control. The sensory quality attributes juiciness, texture and overall acceptability of T-2 and T-3 were (p<0.05) higher than control. Results concluded that low-fat pork patties with acceptable sensory attributes, improved cooking yield and textural attributes can be successfully developed with the incorporation of a combination of 1.0% SPP and 9.0% chilled water.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.291-298
• /
• 2012

While attempting to develop low salt, low fat and high fibre chicken nuggets, the effect of partial (40%) common salt substitution and incorporation of chickpea hull flour (CHF) at three different levels viz., 5, 7.5 and 10% (Treatments) in pre-standardized low fat chicken nuggets (Control) were observed. Common salt replacement with salt substitute blend led to a significant decrease in pH, emulsion stability, moisture, ash, hardness, cohesiveness, gumminess and chewiness values while incorporation of CHF in low salt, low fat products resulted in decreased emulsion stability, cooking yield, moisture, protein, ash, color values, however dietary fibre and textural properties were increased (p<0.01). Lipid profile revealed a decrease in total cholesterol and glycolipid contents with the incorporation of CHF (p<0.01). All the sensory attributes except appearance and flavor, remained unaffected with salt replacement, while addition of CHF resulted in lower sensory scores (p<0.01). Among low salt, low fat chicken nuggets with CHF, incorporation CHF at 5% level was found optimum having sensory ratings close to very good. Thus most acceptable low salt, low fat and high fibre chicken nuggets could be developed by a salt replacement blend and addition of 5% CHF.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.588-597
• /
• 2007

Low-fat ground pork patties, LFGPP (<10% total fat) formulated with 0.1, 0.2 and 0.3 percent sodium alginate (SA) were processed and compositional, processing and sensory characteristics were compared with control patties containing 20% fat. The moisture content of raw and cooked LFGPP were significantly (p<0.05) higher than control patties because of greater amount of added water in the formulation. The cooking yield, moisture and fat retention also increased linearly in different treatments of LFGPP. The dimensional parameters such as gain in height, decrease in diameter and shrinkage were significantly (p<0.05) lower in LFGPP in comparison to control. Amongst the sensory attributes, flavour showed a declining trend with the increase in concentration of SA in LFGPP. However, low-fat patties with 0.1% SA rated similar to high-fat control. The lipid profile revealed 49.78 and 43.22% decrease in total lipids and cholesterol content respectively, compared to control. The calorie content was reduced significantly (p<0.05) in LFGPP. The texture profile of LFGPP with 0.1% SA was similar to that of high-fat control. The LFGPP remained stable without any appreciable loss of physico-chemical, microbiological and organoleptic quality during refrigerated storage ($4{{\pm}}1^{\circ}C$) for 21 and 35 days in aerobic and vacuum packaging respectively.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.886-895
• /
• 2010

The level of fat and salt can affect the product quality and storage stability of processed meats. Additionally, consumers' demands require dietary guidelines for developing low-fat/salt functional foods. Microbial transglutaminase (MTGase), which enhances textural properties by catalyzing protein-protein cross-linkages, was introduced to develop healthier lowfat/salt meat products. The potential possibilities of low-fat/salt processed meats were reviewed under optimal conditions for functional ingredients from several previous studies. The addition of non-meat protein (e.g. sodium caseinate and soy protein isolates), hydrocolloids (e. g. konjac flour, carrageenan, and alginates), and MTGase alone or in combination with other functional ingredients improved textural and sensory properties similar to those of regularly processed meats. When MTGase was combined with hydrocolloids (konjac flour or sodium alginate) or other functional ingredients, gelling properties of meat protein were improved even at a low salt level. Based on these reviews, functional ingredients combined with new processing technologies could be incorporated into processed meats to improve the functionality of various low-fat/salt meat products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.261-265
• /
• 2003

This study was performed to determine whether transglutaminase (Aciva-TG, TGase) can be used to reduce the salt level in low-fat sausages and to replace emulsified meats (10%) for the manufacture of restructured meat products (RMP). Pork hams and loins were collected from a local retail market in Gwangju, Korea and used for the manufacture of sausages and RMPs, respectively. TGase at the level of 0.1% can permit the reduction of the salt level from 1.5% to 1.0% in low-fat comminuted sausages without any quality defects, however a crumbly texture was found if the salt level was reduced below 1.0% even though it combined with certain amounts of TGase. No differences in chemical composition and physical properties were observed (p>0.05) among treatments. Approximately 0.3% of TGase can replace 10% emulsified meats, which are normally used for improvement of binding capacity to manufacture RMPs, without quality defects. This study suggests that TGase could be used for the manufacture of low-fat, low-salt functional meat products for the improvement of textural characteristics and binding capacity without adverse effects.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.218-222
• /
• 2004

Low-fat (< 3%)/salt(< 1%) sausages were manufactured with two levels (1, 2%) of milk proteins(whey protein and sodium caseinate) to compensate for the textural problems due to reduced fat and salt(%). The addition of two levels of milk proteins into these meat products did not affect the most physicochemical and textural properties. As compared to regular-fat counterpart, higher expressible moisture of low-fat/salt sausages were observed. In addition, low-fat/salt sausages containing more than 2% of milk proteins reduced the textural hardness and gumminess, resulting in significantly lower these values, as compared to regular-fat counterparts. These results indicated that the low-fat/salt sausages were successfully manufactured with the addition of these milk proteins at the lower than 1% to improve the textural difference, however further research will be performed to improve the water holding capacity in these products.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.2
• /
• pp.254-260
• /
• 2007

This study was examined closely physiological activation and intended to present the possibility of developing food low-fat food. Developing carbohydrate fat replacer as materials for low-fat food made of Korean potato starch, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. The calorie of starch of GPS was measured to be 3.0 kcal/g, those of chemically modified starch, HPR showed 2.5 kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with gel of starch and modified starch in constant rate through utilization of modified starch. When producing mayonnaise by substituting edible oil with gel of modified starch in 10-50%, calorie was reduced by 44${\sim}$45% when substituted by 50%, suggesting the potential of low-fat food. Measuring viscosity of mayonnaise by Brookfield viscometer, the mayonnaise with HPR showed high viscosity and the chemical modified starch group of EZ also showed high viscosity. Generally, the material property of mayonnaise tended to reduce in all measured items when oil and fat are substituted by starch substituting materials and the substituting materials increase. When it comes to the emulsification stability of mayonnaise with starch substituting materials, emulsification stability of all mayonnaise with starch substituting materials is lower than that of compared group. While the group with NL as commercial fat replacer showed emulsification stability which was slightly higher than group with modified starch and the substitution group of HPR showed higher emulsification stability. Sensory evaluation for low-fat mayonnaise by substituting oil the products substituted by modified starch was more preferred than general starch substituting products such as GPS. While NL as commercially fat replacer showed the hight preference, products with H40, EZ were also highly preferred.