• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.323-326
• /
• 1997

In this study, we investigated the circardian rhythm of complexity of cardiac dynamics in humans. Dynamic 24-hour electrocardiographic recordings were obtained from 30 healthy ambulant subjects aged 41 to 50 years. or each recordings, normalized low frequency (0.04-0.1 hertz) and high frequency (>0.15 hertz) component are calculated. our different indexes obtained from separate algorithms of nonlinear dynamics - approximate entropy, correlation dimension, Lyapunov exponent and fractal dimension - were calculated. During early morning, low frequency component rose rapidly with concomitant withdrawl of high frequency component. All the our indexes of nonlinear dynamics showed remarkably same circardian rhythm: an early morning dip preceded by a steep decline during late night, a gradual recovery during evening and a peak around midnight. These data indicate that the simultansous losses of all of the our different mechanisms of nonlinear control of heart rate during early morning, concomitent with the surge of symapathetic activity and reduction of vagal activity, may contribute to the increased incidence of cardiovascular events during morning hours.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.342-345
• /
• 2002

As the size of chip components and module decreases, new patteming method for fine line and geometry is needed. So far, in LTCC(Low Temperature Cofired Ceramic) process, screen printing method has been used generally. But screen printing method has some disadvantages as follows. First, the geometry including line, vias, etc. smaller than $100{\mu}m$ can't be evaluated easily. Second, the patterned dimension is different from designed value, which makes distortion in charactersitics of not only chip components but also modules. Thick film lithography has advantages of thick film screen printing process, low cost and thin film process, fine line feasibility. Using this method, the line with $30{\mu}m$ width and the geometry with expected dimension can be evaluated. In this study, the fine line with $35{\mu}m$ line/space is formed and the embedded capacitor with very small tolerance is developed using thick film lithography.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.531-537
• /
• 2014

Through-silicon vias (TSVs) are fine, deep holes fabricated for connecting vertically stacked wafers during three-dimensional packaging of semiconductors. Measurement of the TSV geometry is very important because TSVs that are not manufactured as designed can cause many problems, and measuring the critical dimension (CD) of TSVs becomes more and more important, along with depth measurement. Applying white-light scanning interferometry to TSV measurement, especially the bottom CD measurement, is difficult due to the attenuation of light around the edge of the bottom of the hole when using a low numerical aperture. In this paper we propose and demonstrate four bottom CD measurement methods for TSVs: the cross section method, profile analysis method, tomographic image analysis method, and the two-dimensional Gaussian fitting method. To verify and demonstrate these methods, a practical TSV sample with a high aspect ratio of 11.2 is prepared and tested. The results from the proposed measurement methods using white-light scanning interferometry are compared to results from scanning electron microscope (SEM) measurements. The accuracy is highest for the cross section method, with an error of 3.5%, while a relative repeatability of 3.2% is achieved by the two-dimensional Gaussian fitting method.

• 말소리와 음성과학
• /
• 제7권3호
• /
• pp.99-105
• /
• 2015

The current study investigates whether Korean-speaking adults show differential sensitivities to the sources of auditory stimuli (L1 Korean and L2 English) in utilizing VOT and f0 in the perceptual mode of L2 stops, and how the L2 proficiency interacts with the learners' low-level phonetic sensitivities in L2 perceptual mode. 48 Korean learners of English participated in the perception experiments where they rated the goodness of English /t/ and /d/ using an analogue scale. Two sets of stimuli (English and Korean sources) were prepared by manipulating VOT (6-steps) and f0 (5-steps) values of productions by an English male (L2 source condition) and a Korean male (L1 source condition). Findings showed that, in judging /t/-likeness, the listeners responded differently to the two auditory stimulus conditions by relying on VOT significantly more in English source condition than in Korean source condition. The listeners' English proficiency did not interact with these differential sensitivities to the auditory stimulus source either along the VOT dimension or the f0 dimension. The results of the current study suggest that low-level contextual information of the auditory source can affect the learners in faithfully being in the L2 perceptual mode.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.153-164
• /
• 2018

In semiconductor manufacturing, critical dimensions indicate the features of patterns formed by the semiconductor process. The purpose of measuring critical dimensions is to confirm whether patterns are made as intended. The deposition process for an organic light emitting diode (OLED) forms a luminous organic layer on the thin-film transistor electrode. The position of this organic layer greatly affects the luminescent performance of an OLED. Thus, a system for measuring the position of the organic layer from outside of the vacuum chamber in real-time is desired for monitoring the deposition process. Typically, imaging from large stand-off distances results in low spatial resolution because of diffraction blur, and it is difficult to attain an adequate industrial-level measurement. The proposed method offers a new superresolution single-image using a conversion formula between two different optical systems obtained by a deep learning technique. This formula converts an image measured at long distance and with low-resolution optics into one image as if it were measured with high-resolution optics. The performance of this method is evaluated with various samples in terms of spatial resolution and measurement performance.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.675-685
• /
• 2020

As the classical response surface method (RSM), the polynomial RSM is so easy-to-apply that it is widely used in reliability analysis. However, the trade-off of accuracy and efficiency is still a challenge and the "curse of dimension" usually confines RSM to low dimension systems. In this paper, based on the univariate decomposition, the polynomial RSM is executed in a new mode, called as DPRSM. The general form of DPRSM is given and its implementation is designed referring to the classical RSM firstly. Then, in order to balance the accuracy and efficiency of DPRSM, its adaptive order revision around the most probable point (MPP) is proposed by introducing the univariate polynomial order analysis, noted as RDPRSM, which can analyze the exact nonlinearity of the limit state surface in the region around MPP. For testing the proposed techniques, several numerical examples are studied in detail, and the results indicate that DPRSM with low order can obtain similar results to the classical RSM, DPRSM with high order can obtain more precision with a large efficiency loss; RDPRSM can perform a good balance between accuracy and efficiency and preserve the good robustness property meanwhile, especially for those problems with high nonlinearity and complex problems; the proposed methods can also give a good performance in the high-dimensional cases.

• 복식문화연구
• /
• 제29권6호
• /
• pp.881-903
• /
• 2021

This study aimed to analyze adult men's body sizes and shapes and suggest size specifications to provide preliminary data to academia and industries. A total of 814 adult men aged 30-44 were selected from the 7th Size Korea data, and 55 direct upper body measurement and calculation items were analyzed using SPSS 25.0. In individual Individual differences, thickness, circumference, and width were high, and height and length were low. Height above the waist base line and shoulder dimension decreased in early 40s age group, while height below the waist base line declined as age increased. In addition, buttocks shape changes were found in early 40s age group. According to factor analysis, 'upper body and upper-extremity horizontal size', 'torso height and upper extremity length', 'shoulder dimension', 'upper body length' and 'shoulder angle' were derived. Using clustering analysis, four different body types were classified: i) big abdomen with flat chest, ii) slender with big, raised shoulders, iii) dwarfish with small, droopy shoulders, and iv) obese with large shoulders. 'Slender with big, raised shoulders' was a typical body shape among men aged 30-44. In older participants, the 'big abdomen with flat chest' ratio was low, while 'obese with large shoulders' was more common. This study proposed size specifications by body type considering the above characteristics.

• 한국과학교육학회지
• /
• 제19권2호
• /
• pp.239-247
• /
• 1999

본 연구는 제 6차 중학교 과학과 교육과정 목표를 달성하기 위한 교수매체인 과학 교과서 생물영역의 내용과 구성을 분석함으로써 체계적인 교과서 개발에 관한 제안을 하고자 하였다. 제 6차 과학과 교육과정의 하위목표와 Klopfer 및 교육부의 분류틀에 근거하여 교육목표의 포괄성을 분석하였다. 또한 Tyler의 교육과정 모형에서 제시된 목표 설정 준거인 학습자 차원, 교과차원, 사회 차원에 따라 생물영역의 내용과 구성을 분석하였다. 분석 결과는 다음과 같다. 1. 제시된 목표의 포괄성은 매우 낮았다. 2. 학습자 차원에 있어서 주요 개념의 인지적 수준은 학년이 올라감에 따라 형시적 조작수준의 것이 급격히 증가하였다. 또한 학습 주제와 영역에 있어 학습자의 흥미 반영도가 낮았다. 3. 교과 차원에서는 학년이 올라감에 따라 탐구 학습활동에 비해 개념 중심의 학습활동의 비중이 증가 하였으며, 탐구과정의 하위요소 분석결과, 1학년에서는 관찰, 분류, 기록정리, 기능 중심으로 구성되었고, 2학년에서는 관찰과 기구조작 중심으로, 3 학년에서는 자료해석이 증가하였다. 문제와 과정이 주어져 탐구 자유도가 낮았다. 학습상황은 실생활적 상황에 비해 학문적 상황 중심으로 구성되었다. 4. 사회 차원에서는 환경과 건강에 관한 학습 주제들은 많이 다루어져 있었으나, 생명공학, 진로에 관한 주제는 매우 적었으며, 2학년과 3학년에 편중되어 있다. 본 연구의 분석 결과, 교육과정 목표의 효과적인 달성을 위해서는 목표의 포괄성을 높이고 교과서의 내용과 구성이 학습자, 교과, 사회 차원에서 균형 있게 조직되어야 함을 시사한다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.9-14
• /
• 2003

A Bayesian model-based clustering method is proposed for clustering objects on the basis of dissimilarites. This combines two basic ideas. The first is that tile objects have latent positions in a Euclidean space, and that the observed dissimilarities are measurements of the Euclidean distances with error. The second idea is that the latent positions are generated from a mixture of multivariate normal distributions, each one corresponding to a cluster. We estimate the resulting model in a Bayesian way using Markov chain Monte Carlo. The method carries out multidimensional scaling and model-based clustering simultaneously, and yields good object configurations and good clustering results with reasonable measures of clustering uncertainties. In the examples we studied, the clustering results based on low-dimensional configurations were almost as good as those based on high-dimensional ones. Thus tile method can be used as a tool for dimension reduction when clustering high-dimensional objects, which may be useful especially for visual inspection of clusters. We also propose a Bayesian criterion for choosing the dimension of the object configuration and the number of clusters simultaneously. This is easy to compute and works reasonably well in simulations and real examples.

• 한국주거학회논문집
• /
• 제3권2호
• /
• pp.13-19
• /
• 1992

The purpose of this study is to grasp spatial effects of colours in interior design. The visual feeling in the 1/10 living room scale models that are different in the colour combination of ceilings, walls and floors is judged using a semantic scale of the fifteen adjectives. The major findings are as follows; 1) As a result of factor analysis, three dimensions, "evaluation", "activity" and "warmness" are extracted. Dimension 1, "evaluation", is most greatly affected by the chroma and hue of the room colour, dimension 2, "activity", by the hue and value, by the difference in hue and value of ceilings, walls and floors, dimensions 3, "warmness", by mainly the hue of the rooms. 2) Concerning the spatial effects of colour, the subjects felt higher vlaue with relevance to the hue of GY, Y, low chroma and high value. The room colours other than walls is felt more comfortable in similar colour, especially hue and value.re comfortable in similar colour, especially hue and value.