• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.217-230
• /
• 2020

Global warming has increased interest in reducing greenhouse gas emissions. And a policy has effort to reduce energy consumption as a greenhouse gas reduction plan. In Korea, 25% of total energy is consumed in the building sector. In order to reduce energy consumption of buildings, it is possible to expand the utilization of wood as a structural material or thermal insulation materials with low thermal conductivity. It is also reported that when used as an interior finishing material, the energy consumption of the building is reduced by up to 7% by insulation performance. In this study, the heat transfer characteristics and the heat capacity were compared according to the three type of finishing materials(cement, paulownia coreana, medium density fiberboard) normally used as indoor finish materials. Through this study, most of the heat transfer volumes are transferred in the form of radiant heat, and the result was derived from the highest amount of energy and heat transfer in the use of paulownia coreana. When indoor finishing materials are used as wood, it is deemed that energy efficiency inside the building will be improved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.202-225
• /
• 2017

Non Timber Forest Products (NTFPs) has gained a lot of significance over the years as a means of income generation. Forests are playing a vital role in the supply of these products, however, due to their continuous extraction, the population of many species might have depleted. Very little information is known about community structure and population status of NTFPs. No specific studies have been made to find out the occurrence, availability of species and population status in the forests, supplying the resources. The present study has been carried out in community forests of the naturally occurring NTFPs in the temperate forest of the Ziro valley of Arunachal Pradesh. The main aim is to determine community structure, species composition and population status of NTFPs. Three forest stands viz., Nyilii, Dura and Gyachi were selected which are used by the Apatani tribe for extraction of the NTFPs. For evaluation of species composition and community characteristics, the sampling of the vegetation was done using the quadrat method. A total 137 species representing 68 families and 116 genera were recorded. Herbs represent the maximum diversity with 71 species followed by 35 shrub species and 31 tree species. The families Asteraceae and Rosaceaeae exhibited maximum representation followed by Urticaceae. The species under Fagaceae, Lauraceae, Rosaceae and Rutaceae were found to be important NTFP yielding species. Highest species richness was recorded in Nyilii having 124 species, while lowest in Dura with 102 species. Density of tree, shrub and herb ranged between 376 to $456\;individuals\;ha^{-1}$, 2848 to $3696\;individuals\;ha^{-1}$ and 31.44 to $36.64\;individuals\;m^{-2}$, respectively. The total basal area was found to be highest ($51.64m^2\;ha^{-1}$) in Dura followed by Nyilii ($25.32m^2\;ha^{-1}$) and lowest in Gyachi ($22.82m^2\;ha^{-1}$). In all the three study stands the species diversity indices showed the trend, herbs > shrubs > trees while the evenness index showed the trend as shrubs > herbs > trees. The overall species similarity index was highest (82.35%) between Dura and Gyachi. About 80% of the total recorded species showed clumped distribution while, no regular distribution was shown by any species. The three selected stands harbor about 50 important NTFP yielding species which are being used commonly by the Apatani people in their day to day life. Among the three study sites, overall diversity of NTFP was found highest in the Nyilii stand while the density of population was found better in Dura and Gyachi stands. The population of many species was found to be low due to continue harvesting without any sustainable management by the communities. All the selected forest stands have the potentiality to grow the high value NTFP yielding species and if managed properly, they can support the livelihood and economy of the local communities.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2001

Forming a part of "Cooperative Practical Study for the Modernization of the Management of National Forest", this study was conducted to provide overall ecological information for the natural regeneration of major tree species on the basis of community structural attributes in the deciduous forest ecosystem. Followings are summarized characteristics of the natural regeneration for the selected tree species. Betula costata : Although large number of seeds are dispersed by wind, they require mineral soils to germinate. Thick litter layer could be an obstacle to germinate. After germination, the seedling requires large amount of light for successful establishment. Acer mono : Characterized by high shade tolerance and weak drought resistance, the seedling should be overcasted with more than 50% of canopy coverage. High stand density should be maintained to produce good quality of timber. The potential of coppice may be high. Ulmus laciniata : Since this species needs high rate of troll moisture and light, around 60% of canopy coverage should be maintained to retain moisture and incoming light. The competition with other vegetation should be removed for the favor of successful seedling establishment. Fraxinus mandshurica : This species requires moist mineral soils to germinate. After germination, the seedling needs large amount of light and moisture for successful establishment. Site preparation should be applied to reduce competition with weedy vegetation. Fraxinus rhynchophylla : Interval of large seed crops may be highly varied. Thick litter layer could be an obstacle to germinate. Site preparation should be applied to reduce competition with weedy vegetation so as to achieve successful seedling establishment. Quercus mongolica : Including the difficulty of seed supply by the consumption, thick litter layer and mountain bamboo cover could be the obstacle to germinate. More than 50% of relative light intensity is necessary to achieve successful seedling establishment. Kalopanax pictus : Thick litter layer could be an obstacle to germinate. The seedling needs large amount of light and moisture for successful establishment. Abies holophylla : In spite of high shade tolerance, the growth rate in sapling stage may be extremely slow. Cornus controversa : Seeds (drups) are consumed and dispersed by animals, tending to be not sufficient in seed supply. This species requires large amount of light for successful germination and seedling establishment. Tilia amurensis : The difficulty of seed supply might be expected with low seed purity and double dormancy. Since thick litter layer could be an obstacle to germinate, the species requires moist mineral soils for successful germination. The potential of coppice may be extremely high.