• Journal of Digital Convergence
• /
• 제16권5호
• /
• pp.137-143
• /
• 2018

Korea's air passenger traffic has been growing steadily. In this paper, we propose a forecasting model of air passenger demand to ascertain the growth trend of air passenger transportation performance in Korea. We conducted a simulation based on System Dynamics with the demand as a dependent variable, and international oil prices, GDP and exchange rates as exogenous variables. The accuracy of the model was verified using MAPE and $R^2$, and the proposed prediction model was verified as an accurate prediction model. As a result of the demand forecast, it is predicted that the air passenger demand in Korea will continue to grow, and the share of low cost carriers will increase sharply. The addition of the Korean transportation performance of foreign carriers in Korea and the transportation performance of Korean passengers due to the alliance of airlines will provide a more accurate forecast of passenger demand.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제20권1호
• /
• pp.26-33
• /
• 2012

Competition between air transportation and railways has grown fiercer in major countries around the world with the rise of high-speed railways. In South Korea, air passenger travel has been rapidly decreasing since the initial launch of the Seoul-Pusan KTX line in 2004 and second opening that followed in 2010. Further expansion of the high-speed railway is expected. At present, research efforts to verify the validity of constructing an underwater express railway tunnel between Ho-nam and Jeju Island are taking place. Considering the possible high speed railway connection between Seoul and Jeju Island, this thesis has analyzed the choice behavior of existing passengers of the major and low-cost carriers. For this, Stated Preference (SP) research has been performed for three variables, including fare, travel time and the number of runs, to estimate the substitution rate of each of the three variables. Binomial Logit Model has been estimated with the obtained data. The estimation of the model has found that airline passengers of major and low-cost carriers are willing to pay approximately 7,200 KRW and 5,000 KRW, respectively, to reduce travel time by one hour. If the number of runs in one day increases, it has been estimated that the passengers are willing to pay additional fares of about 390 KRW and 30 KRW, respectively. On the other hand, the substitution rate between the number of runs and the travel time was found to be somewhat insignificant. If the construction of the Seoul-Jeju line progresses in the future, this study could be used as preliminary data for determining fares, travel time and the number of runs.

• The Magazine of the IEIE
• /
• 제29권3호
• /
• pp.41-48
• /
• 2002

This paper presents a basic concept of lab-on-a-chip systems and their advantages in chemical and biological analyses. In addition, magnetic bead-based immunoassay on a microfluidic system is also presented as a typical example of lab-on-chip systems. Rapid and low volume immunoassays have been successfully achieved on the demonstrated lab-on-a-chip using magnetic beads, which are used as both immobilization surfaces and bio-molecule carriers. Total time required for an immunoassay was less than 20 minutes including sample incubation time, and sample volume wasted was less than $50{\mu}l$ during five repeated assays. Lab-on-a-chip is becoming a revolutionary tool for many different applications in chemical and biological analysis due to its fascinating advantages (fast and low cost) over conventional chemical or biological laboratories. Furthermore, simplicity of lab-on-a-chip systems will enable self-testing capability for patients or health consumers overcoming space limitation.

• Advances in nano research
• /
• 제2권1호
• /
• pp.23-56
• /
• 2014

The significant growth of the Si photovoltaic industry has been so far limited due to the high cost of the Si photovoltaic system. In this regard, the most expensive factors are the intrinsic cost of silicon material and the Si solar cell fabrication processes. Conventional Si solar cells have p-n junctions inside for an efficient extraction of light-generated charge carriers. However, the p-n junction is normally formed through very expensive processes requiring very high temperature (${\sim}1000^{\circ}C$). Therefore, several systems are currently under study to form heterojunctions at low temperatures. Among them, carbon nanotube (CNT)/Si hybrid solar cells are very promising, with power conversion efficiency up to 15%. In these cells, the p-type Si layer is replaced by a semitransparent CNT film deposited at room temperature on the n-doped Si wafer, thus giving rise to an overall reduction of the total Si thickness and to the fabrication of a device with cheaper methods at low temperatures. In particular, the CNT film coating the Si wafer acts as a conductive electrode for charge carrier collection and establishes a built-in voltage for separating photocarriers. Moreover, due to the CNT film optical semitransparency, most of the incoming light is absorbed in Si; thus the efficiency of the CNT/Si device is in principle comparable to that of a conventional Si one. In this paper an overview of several factors at the basis of this device operation and of the suggested improvements to its architecture is given. In addition, still open physical/technological issues are also addressed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.76-76
• /
• 2011

Polymer-fullerene based bulk heterojunction (BHJ) solar cells can be fabricated in large area using low-cost roll-to-roll manufacturing methods. However, because of the low mobility of the BHJ materials, there is competition between the sweep-out of the photogenerated carriers by the built-in potential and recombination within the thin BHJ film [12-15]. Useful film thicknesses are limited by recombination. Thus, there is a need to increase the absorption by the BHJ film without increasing film thickness. Metal nanoparticles exhibit localized surface plasmon resonances (LSPR) which couple strongly to the incident light. In addition, relatively large metallic nanoparticles can reflect and scatter the light and thereby increase the optical path length within the BHJ film. Thus, the addition of metal nanoparticles into BHJ films offers the possibility of enhanced absorption and correspondingly enhanced photo-generation of mobile carriers. In this work, we have demonstrated several positive effects of shape controlled Au and Ag nanoparticles in organic P3HT/PC70BM, PCDTBT/PC70BM, Si-PCPDTBT/PC70BM BHJ-based PV devices. The use of an optimized concentration of Au and Ag nanomaterials in the BHJ film increases Jsc, FF, and the IPCE. These improvements result from a combination of enhanced light absorption caused by the light scattering of the nanomaterials in an active layer. Some of the metals induce the plasmon light concentration at specific wavelength. Moreover, improved charge transport results in low series resistance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제16권3호
• /
• pp.21-30
• /
• 2008

As the low-cost carriers of the region enters the air transportation market, the domestic air transport circumstance is to be changed and each local autonomous entity conducts the feasibility study to develop the regional airport. But the airport is developed almost all by the goal of the policy and actually the valid basis of the airport development is often weak. To present the validity of the regional airport development Using the pre-feasibility study method the government performs I apply it to the airport development project of the Seo-san region. To present the validity of the regional airport development this study carries out the pre-feasibility study by the AHP analysis.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제22권1호
• /
• pp.32-43
• /
• 2014

Worldwide, air transport demand of this century is expanding rapidly, and each countries' demand is also increasing. Thus a number of low-cost carriers emerged in existing air transportation business sector and airman qualification check work regarding aviation safety management is increasing too. As the remedy for the result of aviation safety audit by ICAO and FAA in 2001 that governmental activity for aviation safety had been performed by a small number of aviation safety inspectors, airman qualification inspection system implemented by airlines was improved and the government has established the system that authorized airman qualification inspectors check airmen qualification with airlines according to the international trend. This study suggests the need of improvement of airman qualification inspection system that existing inspection system as the means of safety management can be transferred to Operations Safety Inspection(OSI) activity which is compliant with international standards.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.536-539
• /
• 2000

A simple and effective method has been developed for the immobilization of the cell on polyurethane foam. Two types of commercially available polyurethane foam and Hydro-filt were tested. The ultimate purpose of the process is to produce low-cost materials for hydrogen sulfide removal which are being increasingly used for industrial application. Effect of several parameters were studied on the cell loading. These parameters were type, size, and amount of polyurethane foam. MC-70 was the best immobilization material of three type of carriers, and optical particle size was $5{\sim}8mm$ and amount of polyurethane foam was 8g/L.

• Proceedings of the Korea Contents Association Conference
• /
• 한국콘텐츠학회 2012년도 춘계 종합학술대회 논문집
• /
• pp.213-214
• /
• 2012

항공규제완화법과 더불어 항공 협정에 의한 자유경쟁 체제의 돌입과 함께 급성장한 항공운송시장에서 항공사간의 경쟁이 불가피해졌고 이에 각 항공사들은 경쟁력을 갖추기 위해 고객의 유치뿐만 아니라 경쟁사와의 차별화를 둔 새로운 경영 전략을 수립 및 추구해 나가고 있는 실정이다. 본 연구에서는 충성 고객 증진 및 그 보유 방안을 모색하기 위하여 국내 저비용항공사 이용 고객을 대상으로 항공사 선택 속성에 영향을 미칠 수 있는 요인들 중 가격, 서비스, 금전 가치, 감정가치, 만족, 신뢰 및 충성도라는 변수들에 대하여 실증 연구를 통한 분석으로 그 유의성을 알아보고자 한다. 가설 및 연구 모형 검증을 위해 SPSS와 AMOS 프로그램의 활용 및 빈도 분석, 요인 분석, 신뢰도 검정 그리고 공분산 구조 방정식 분석 등의 통계기법을 이용하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.202-205
• /
• 1997

We investigated grain boundary effect for terrestrial applications of solar cell\ulcorner with low cost, large area, and high efficiency. Grain boundaries are known as potential barriers and recombination centers for the photo-generated charge carriers, which make it difficult to achieve a high efficiency cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatments, various grid patterns, selective wet etchings for grain boundaries, buried contact metallizations along grain boundaries, and use of metallic thin films. From the various grid patterns we learned that the series resistance of solar cell reduced open circuit voltage and consequently decreased the cell efficiency. This paper describes the effect of various grid patterns and the employment of metallic thin films for a top electrode.