• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.393-398
• /
• 1994

Roller compacted concrete(RCC) has been attracted due to its growing application to pavement concrete construction. In this study optimum mixing formation of RCC was explored and characterized its properties forcusing on reducing try and error for actual application to construction of pavement. The concrete used for roller compacted concrete pavement (RCCP) has very low water content per unit volume, so that it develops early high strength. This high early strength development makes pavement constructed open early. This concrete also showed very reduced crack formed on the surface because of expensive cement.

• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.287-293
• /
• 2013

Strength and some durability properties of concrete containing rice husk ash (RHA) predominantly composed of amorphous silica at a specific surface of 235 $m^2/kg$ produced using a charcoal incinerator were determined. The maximum ordinary Portland cement (OPC) replacement with the RHA increased with increase in water/binder (w/b) ratio of the concrete mixes. The results show that 15 % OPC could be substituted by the RHAwithout strength loss at w/b ratio of 0.50. The split tensile strength generally increased with increase in RHA content for the mixes.

• 한국농공학회지
• /
• 제27권1호
• /
• pp.46-61
• /
• 1985

This study was performed to obtain the basic data which can be applied to the use of foaming mortars. The data was based on the properties of foaming mortars depending upon various mixing ratios and addings to compare those of cement mortar. The foaming agents which was used at this experiment were pre-foamed type and mix-foaming type which is being used as mortar structures. The foaming mortar, mixing ratios of cement to fine aggregate were 1:1, 1: 2, 1 : 3 and 1 : 4. The addings of foaming agents were 0.0%, 0.5%, 1.0%, 1.5%, 2.0%, 2.5% and 3.0% of cement weight. The results obtained were summarized as follows; 1. At the mixing ratio of 1 : 1, the lowest water-cement ratios were showed by foaming mortars, respectively. But it gradually was increased in poorer mixing ratio and decreased in more addition of foaming agent. The water-cement ratios were decreased up to 1. 8~22. 0% by G, 2. 2~24. 1 % by U and 0. 7~53. 1% by J foaming mortar than cement mortar. 2, At the mixing ratio of 1 : 1, the highest bulk densities were showed by foaming mortars, respectively. But, it gradually was decreased in poorer mixing ratio and more addition of foaming agent. The bulk densities were decreased up to 1. 4~20. 7% by G, 2. 3~23. 7% by U and 26. 5~56. 5% by J foaming mortar than cement mortar. Therefore, foaming mortar could be utilized to the constructions which need low strengths. 3. At the mixing ratio of 1:1, the lowest absorption rates were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Specially, according to the absorption rate when immersed in 72 hours, the absorption rates were showed up to 1. 01~1. 24 times by G, 1. 03~1. 58 times by U and 1. 10~5. 91 times by J foaming mortar than cement mortar. It was significantly higher at the early stage of immersed time than cement mortar. 4. At the mixing ratio of 1:1, the lowest air contents were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Air contents were contented up to 4. 0~17. 2 times by G, 5. 2~23. 2 times by U and 23. 8~74. 5 times by J foaming mortar than cement mortar. 5. At the mixing ratio of 1 : 1, the lowest decreasing rates of strengths were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Specially, the strengths of 28 days were decreased 0. 4~2. 2% than those of 7 days by foaming mortar, respectively. Also, the correlations between compressive and tensile strength, compressive and ending strength, tensile and bending strength were highly significant as a straight line shaped, respectively. 6. The correlations between absorption rate, air content, compressive strength and bulk density, absorption rate, compressive strength and air content were highly significant, respectively. The multiple regression equations of water-cement ratio, bulk density, absorption ate, air content, compressive strength, tensile strength and bending strength were computed depending on a function of mixing ratio and addition of foaming agent. It was highly significant, respectively. 7. At the mixing ratio of 1 : 1, the highest strengths were showed by cement mortar and foaming mortars, by chemical reagents. But, it gradually was decreased in poorer mixing ratio. The decreasing rates of strengths were in order of H $_2$S0 $_4$, HNO$_3$ and HCI, J,U,G foaming mortar and cement mortar. Specially, at the each mixing ratio, each chemical reagent and 3.0% of foaming agent, J foaming mortar was collapsed obviously. Therefore, for the structures requiring acid resistence, adding of foaming agent should be lower than 3.0%.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.60-66
• /
• 1985

The formation mechanism of unstable alkali and its existing states in the clinker were studied. The relation of unstable alkali content vs. other water-soluble components porosity and the distributionof potassium were investigated. The results are as follows :1) Two states of unstable alkali seem to exist in clinker ie compounds of $K_2O-Al_2O_3$ system and free $K_2O$ 2) The content of water-soluble $Al_2O_3$ tends to increase with increase of unstable alkali content, 3) Most of alkalies in clinker are concentrated in liquid phase at high temperature. Therefore it is possible to make various $K_2O-Al_2O_3$ system compounds according to the content of $K_2O$ in the liquid phase of clinker. In this experiment we found out a $K_2O-Al_2O_3$ compound of high $Al_2O_3$ content (34%) and high $K_2O$ content (33%) in clinker with 1.09% unstable alkali. 4) The porosity of clinker tends to increase with increase of unstable alkali content. 5) The amount of trapped alkali vapor may increase in closed pore in the clinker with high alkali and low $SO_3$ condecent. Therefore free $K_2O$ is the condensed alkali on the wall of closed pore in the clinker.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.155-156
• /
• 2019

Recently, the use of selective crushed aggregates is increasing due to the supply and demand shortage of aggregates. In the case of selective crushed aggregates, aggregates are produced using soil, rocks, etc., mainly generated at construction sites as raw materials. As a result, the quality of the raw material may not be uniform and may contain a large amount of soil. In the case of using such a bad aggregate shortens the life of the structure, there is a fear that adversely affect the overall performance, such as the strength and durability of the concrete. Therefore, this study analyzes the effect of aggregate soil on mortar in the low-strength mortar and ultimately proposes the regulation value of clay content in the soil content of crushed aggregates such as crushed aggregates.

• 대한건축학회논문집:구조계
• /
• 제34권7호
• /
• pp.19-26
• /
• 2018

This study tested 25 lightweight aggregate concrete (LWAC) mixtures using the expanded bottom ash and dredged soil granules to examine the compressive strength gain of such concrete with different ages. The test parameters investigated were water-to-cement ratios and the natural sand content for the replacement of lightweight fine aggregate. The compressive strength gain rate in the basic equation specified in fib model code was experimentally determined in each mixture and then empirically formulated as a function of the water-to-cement ratio and oven-dried density of concrete. When compared with 28-day compressive strength, the tested LWAC mixtures exhibited relatively low gain ratios (0.49~0.82) at an age of 3 days whereas the gain ratios (1.16~1.41) at 91 days were higher than that (1.05~1.15) of the conventional normal-weight concrete. Thus, the fib model equations tend to overestimate the early strength gain of LWAC but underestimate the long-term strength gain. The proposed equations are in good agreement with the measured compressive strength development of LWAC at different ages, indicating that the mean and standard deviation of the normalized root mean square errors determined in each mixture are 0.101 and 0.053, respectively.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3235-3241
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) is planning the construction of the KIJANG Research Reactor (KJRR) for stable supply of ⁹⁹Mo. The Fission ⁹⁹Mo Production Process (FMPP) of KJRR produces solid waste such as spent uranium cake and alumina cake, and liquid waste in the form of intermediate level liquid waste (ILLW) and low level liquid waste (LLLW). This study thus established the operating range and optimum operating conditions for the cementation of ILLW from FMPP. It also evaluated whether cement waste form samples produced under optimum operational conditions satisfy the waste acceptance criteria (WAC) of a disposal facility in Korea (Korea radioactive waste agency, KORAD). Considering economic feasibility and safety, optimum operational conditions were achieved at a w/c ratio of 0.55, and the corresponding salt content was 5.71 wt%. The cement waste form samples prepared under optimum operational conditions were found to satisfy KORAD's WAC when tested for structural stability and leachability. The results indicate that the proposed cementation conditions for the disposal of ILLW from FMMP can be effectively applied to KJRR's disposal facility.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.395-404
• /
• 2005

This study is to evaluate the physical and mechanical characteristics of flowable backfill and search for the optimal mixture contents of it used for constructing underground power utilities. flowable backfill is known as soil-cement slurry, void fill, and controlled low-strength material(CLSM). The benefits of CLSM include reduced equipment costs, faster construction, re-excavation in the future, and the ability to place material in confined spaces such as narrow parts nearly impossible for compaction or perimeter of underground power cables. The flowable slurry mixture made with 9 types of soil and 6 types of accelerated mixtures in the laboratory were evaluated for bleeding, flowability, heat resistance, and unconfined compressive strength to meet the aim values of this study.

• Advances in concrete construction
• /
• 제3권1호
• /
• pp.1-14
• /
• 2015

China accounts for nearly half of the global steel production. As a waste material or a by-product in the manufacture process, a large amount of blast furnace slag is generated every year. The majority of recycled blast furnace slag is used as an additive in low-grade blended cement in China (equivalent to the UK CEM II or CEM III depending on the slag content). The cost of using ground granulated blast furnace slag (GGBS) in such low-grade applications may not be entirely reimbursed based on market research. This paper reports an on-going project at Xi'an Jiaotong-Liverpool University (XJTLU) which investigates the feasibility of using GGBS in long-span concrete structures by avoiding/reducing the use of crack control reinforcement. Based on a case study investigation, with up to 50% of CEM I cement replaced with GGBS, a beneficiary effect of reduced thermal contraction is achieved in long-span concrete slabs with no significant detrimental effect on early-age strengths. It is believed that this finding may be transferable from China to other Asian countries with similar climates and economic/environmental concerns.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.143-148
• /
• 2016

본 연구는 3성분계 시멘트에서 FA와 BS의 최적혼합비율을 도출하기 위한 것이다. 즉, 혼화재 치환율 별 FA 및 BS의 다양한 혼합비율에 따른 모르타르의 기초적 특성을 파악하고자 하였다. 실험결과, 본 연구의 범위 내에서 다음과 같은 결론을 얻었다. 플로의 경우는 혼화재 치환율 및 FA의 혼합비율이 증가함에 따라 증가하는 것으로 나타났다. 공기량은 혼화재 치환율이 증가하고 FA의 혼합비율이 증가할수록 감소하였다. 단위용적질량은 혼화재 치환율 25% 및 45%에서는 공기량이 감소할수록 증가하는 것으로 나타났지만, 65% 및 100%에서는 FA 치환율 20%까지는 증가하였지만 그 이상에서는 FA의 저밀도 영향으로 감소하였다. 응결시간은 혼화재 치환율 및 FA의 혼합비율이 증가함에 따라 지연되는 것으로 나타났다. 압축강도의 경우는 재령 91일에 혼화재치환율 25% 및 45%에서 FA : BS의 비율이 40 :t 60인 배합에서 가장 우수한 강도 값을 나타내었다. 따라서 압축강도적인 측면을 종합적으로 고려할 때 혼화재 치환율 25% 및 45%인 경우에서 FA : BS의 비율 2 : 3인 경우가 본 연구의 범위 내에서는 최적의 혼합비율인 것으로 판명되었다.