• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.137-145
• /
• 1981

Using the milled, blast infected leaves (BIL) as an inoculum source on the screening for the resistance to blast of rice plant was a simple and useful technique. The temperature with high (25^\circ C\sim 35^\circ C) and low (15^\circ C\sim 28^\circ C) and the water stressed or not, was conditioned of to the inoculation with the BIL to the test varieties in seedling stage. In low temperature, most of the varieties were more infected with blast, however the Indica-Japonica hybrids were more infected in high temperature conditions. The water stressed was more infected with blast than the not stressed. The interaction of variety with water stress was not so much as that of variety with temperature. Resistant reaction to blast (BIL) was not affected by the temperature and water stress, but the moderately resistant or susceptible one was much affected by them. Inoculum of BIL was virulent to the newly bred Indica-Japonica hybrid cultivars such as Tongil, Nopung, etc, but not virulent to the Japonica cultivars such as Nongbaek, Jinheung, etc. The discrete, mixed or variable lesions were observed mainly in the moderately resistant or susceptible cultivars such as Kanto 51, Yashiromochi, Ishikari-shiroke, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6114-6125
• /
• 2014

This paper analyzed the issues related to focus on farmers behaviors of energy saving facilities. This study conducted questionnaire and field surveys of controlled horticulture farmers and economic analysis using an IPA(Importance-Performance Analysis) matrix. According to the research results, the performance level was low on average ranging from 2.33 to 2.56 in a five point Likert-scale on greenhouse mandarin and grape-related facilities. On the other hand, the importance levels were high in the mean rating from 2.69 to 4.8. The results show that energy loss reduction of complementary facility and alternative energy supply support for low cost implementation are more important in terms of the respondents concerns than performance quadrant III. Therefore, it is important to provide financial support to energy-saving facilities to promote the use of energy efficiency improvement. In addition, the government should invest continuously in research and development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.77-77
• /
• 2000

Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.439-444
• /
• 1993

The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1801-1808
• /
• 2019

Objective: As an iconic symbol of Qinghai-Tibetan Plateau and of high altitude, yak are subjected to hypoxic conditions that challenge aerobic metabolism. Matrix metalloproteinases-3 (MMP3) is assumed to be a key target gene of hypoxia-inducible factor-$1{\alpha}$ that function as a master regulator of the cellular response to hypoxia. Therefore, the aim of this investigation was to identify the DNA polymorphism of MMP3 gene in domestic yak and to explore its possible association with high-altitude adaptation. Methods: The single-nucleotide polymorphisms (SNPs) genotyping and mutations scanning at the MMP3 locus were conducted in total of 344 individuals from four domestic Chinese yak breeds resident at different altitudes on the Qinghai-Tibetan Plateau, using high-resolution melting analysis and DNA sequencing techniques. Results: The novel of SNPs rs2381 $A{\rightarrow}G$ and rs4331 $C{\rightarrow}G$ were identified in intron V and intron VII of MMP3, respectively. Frequencies of the GG genotype and the G allele of SNP rs2381 $A{\rightarrow}G$ observed in high-altitude Pali yak were significantly higher than that of the other yak breeds resident at middle or low altitude (p<0.01). No significant difference was mapped for SNP rs4331 $C{\rightarrow}G$ in the yak population (p>0.05). Haplotype GC was the dominant among the 4 yak breeds, and Pearson correlation analysis showed that the frequencies of GC was significantly lower in Ganan (GN), Datong (DT), and Tianzhu white yaks (TZ) compared with Pali (PL) yak. The two SNPs were in moderate linkage disequilibrium in high-altitude yaks (PL) but not in middle-altitude (GN, DT) and low-altitude (TZ) yaks. Conclusion: These results indicate that MMP3 may have been subjected to positive selection in yak, especially that the SNP rs2381 $A{\rightarrow}G$ mutation and GC haplotypes might contribute to adaptation for yak in high-altitude environments.

• Journal of Periodontal and Implant Science
• /
• v.51 no.5
• /
• pp.342-351
• /
• 2021

Purpose: The aim of this study was to compare the inflammatory and lipid profile of patients with and without peri-implantitis. Methods: A cross-sectional biochemical study was carried out in which blood samples were collected from 16 patients with peri-implantitis and from 31 subjects with healthy implants. Clinical peri-implant parameters were obtained from all subjects. Levels of tumor necrosis factor-alpha and interleukin-10 (IL-10) were measured in serum. Lipid fractions, glucose and creatinine levels, and complete blood count were also assessed. Results: After controlling for a history of periodontitis, statistically significant differences between peri-implantitis patients and controls were found for total cholesterol (estimated adjusted mean difference, 76.4 mg/dL; 95% confidence interval [CI], 39.6, 113.2 mg/dL; P<0.001), low-density lipoprotein (LDL) cholesterol (estimated adjusted mean difference, 57.7 mg/dL; 95% CI, 23.8, 91.6 mg/dL; P<0.001), white blood cells (WBC) (estimated adjusted mean difference, 2.8×10³/µL; 95% CI, 1.6, 4.0×10³/µL; P<0.001) and IL-10 (estimated adjusted mean difference, -10.4 pg/mL; 95% CI, -15.8, -5.0 pg/mL; P<0.001). The peri-implant probing pocket depth (PPD) was modestly positively correlated with total cholesterol (r=0.512; P<0.001), LDL cholesterol (r=0.463; P=0.001), and WBC (r=0.519; P<0.001). A moderate negative correlation was observed between IL-10 and PPD (r=0.609; P<0.001). Conclusions: Otherwise healthy individuals with peri-implantitis showed increased low-grade systemic inflammation and dyslipidemia.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.267-297
• /
• 2003

The plain coarse pottery from the Unjeonri Bronze Age relic sites in the Cheonan, Korea were studied on the basis of clay mineralogy, geochemistry and archaegeological interpretations. For the research, the potteries are utilized at the analysis for 6 pieces of plain coarse potteries. Color of the these potteries are mainly light brown, partly shows the yellowish brown to reddish brown. The interior, surface and inside of the pottery appear as different colors in any cases. Original source materials making the Unjeonri potteries are used of mainly sandy clay soil with extreme coarse grained irregularly quartz and feldspar. The magnetic susceptibility of the Unjeonri pottery range from 0.20 to 1.20. And the Unjeonri soil's magnetic susceptibility agree almost with 0.20 to 1.30. In the same magnetization of soil and pottery, the results revealed that the Unjeonri soil and low material of pottery are same produced by identical source materials. The Unjeonri potteries and soil are very similar patterns with all characteristics of soil mineralogy, geochemical evolution trend. The result seems to be same relationships between the behavior and enrichment patterns on the basis of a compatible and a incompatible elements. Consequently, the Unjeonri potteries suggest that made the soil to be distributed in the circumstance of the relic sites as the raw material are high in a greater part. In the Unjeonri soil, the kaolinite is common occurred minerals. However, in the Unjeonri pottery, the kaolinite was not detected in all broken pieces. The kaolinite was presumed to destroy crystal structure during the firing processes of over $550^{\circ}C$. The quartz is phase transition from ${\alpha}$-quartz to ${\beta}$-quartz at $573^{\circ}C$, but the Unjeonri pottery did not investigated any phase transition evidences of quartz. The chorite was detected within the mostly potteries and soils. As the results, the Unjeonri potteries can be interpreted by not experiencing a firing temperature over $800^{\circ}C$. The colloidal and cementing materials between the quartz and low materials during the heating did not exist in the internal part of the potteries. An any secondary compounds by heating does not appear within the crack to happen during the dry of the pottery. The hyphae group are kept as it is with the root tissue of an organic matters to live in the swampy land. In the syntheses of all results, the general firing condition to bake and make the Unjeonri pottery is presumed from $550^{\circ}C$ to $800^{\circ}C$. However, the firing condition making the Unjeonri pottery can be different firing temperature partially in one pottery. Even, the some part of the pottery does not take a direct influence on the fire.

• Korean Journal of Ecology and Environment
• /
• v.51 no.4
• /
• pp.322-330
• /
• 2018

Herbivory is a major functional component of forest ecosystems, and herbivorous insects comprise about 25% of all insect species. Increasing plant diversity is related to herbivore abundance and diversity, which affects the level of leaf damage caused by insects. This study was conducted to identify plant-related variables such as plant diversity and number of leaves and density-related variables, basal area, and diameter at breast height (DBH) in a temperate forest of southern South Korea. To assess the level of leaf damage caused by leaf chewing insects, we set up two 0.1 ha plots in a temperate deciduous forest on Mt. Jirisan National Park. Plant richness differed between two sites: 16 species in 14 families(site 1) and 19 species in 15 families (site 2). Fisher's alpha index based on plant species richness and abundance resulted in 4.41 (site 1) and 6.57 (site 2). However, the sum of basal area of each site was higher in site 1 ($6.6m^2$) than site 2 ($3.7m^2$). The total surveyed leaves at two sites were 3,832 and 4,691, respectively and the damage leaves were 1,544 and 2,136, respectively. The mean leaf damage level was 11.2% (${\pm}1.76%$) in two study sites: the leaf damage level of the site 1 (11.99%) was significantly higher than site 2 (10.59%). Stepwise regression analysis showed that species diversity and evenness were the significant variables for leaf damages by chewing herbivores. NMDS ordination also identified that high tree density and low species diversity were the significant variables. This suggested that the level of damage was significantly higher in plots with low plant diversity and high tree density. In the future, we will investigate other guilds of herbivores such as sap-suckers, miners and gallers in temperate deciduous forests.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.720-726
• /
• 2019

Recently, research on cost reduction and efficiency improvement of crystalline silicon(c-Si) photovoltaic(PV) module has been conducted. In order to reduce costs, the thickness of solar cell wafers is becoming thinner. If the thickness of the wafer is reduced, cracking of wafer may occur in high temperature processes during the c-Si PV module manufacturing process. To solve this problem, a low temperature process has been proposed. Conductive paste(CP) is used for low temperature processing; it contains Sn57.6Bi0.4Ag component and can be electrically combined with solar cells and ribbons at a melting point of $150^{\circ}C$. Use of CP in the PV module manufacturing process can minimize cracks of solar cells. When CP is applied to solar cells, the output varies with the amount of CP, and so the optimum amount of CP must be found. In this paper, in order to find the optimal CP application amount, we manufactured several c-Si PV modules with different CP amounts. The amount control of CP is fixed at air pressure (500 kPa) and nozzle diameter 22G(outer diameter 0.72Ø, inner 0.42Ø) of dispenser; only speed is controlled. The c-Si PV module output is measured to analyze the difference according to the amount of CP and analyzed by optical microscope and Alpha-step. As the result, the optimum amount of CP is 0.452 ~ 0.544 g on solar cells.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.28-34
• /
• 2004

This study was performed to evaluate the characteristics of the carboxymethylated substrate from high reactive autohydrolyzed cellulose (HRC) and those of commercial α-cellulose (CAC) and refiner mechanical pulp (RMP). Saccharification rates of HRC substrate were achieved over 70% with 12 hr hydrolysis, about 90% with 24 hr, and 99.5% with 72 hr. CMCase and avicelase activities of cellulase onozuka were 4.09 ㎛ G/mg·min and 14.0 ㎛ G/mg·min, respectively. There were no any significant changes in cellulase activities with this substrate. The saccharification rates of CAC and RMP were very low, 57% and 38% with 72 hr, respectively. Those lignin-zero autohydrolyzed substrates, HRC and CAC, were highly carboxymethylated at the high alkali concentration, near 30%, for 3 hr. reaction, and resulted in 1.13-1.15 of D.S., besides 0.85 of D.S. from RMP. Water solubilities of carboxymethylated substrates were increased with an increase of D.S., 98-98.5% from HRC and CAC and 31.5% from RMP. RMP which has low specific surface area showed lower water retention values, compared to high values of 435 and 321% from CAC and HRC, respectively. There were no direct relationship between surface area and swelling ratio of the substrates.