• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.84-90
• /
• 2019

Tremendous computation of full search or lossless motion estimation algorithms for video coding has led development of many fast motion estimation algorithms. We still need proper control of computation and prediction quality. In the paper, we suggest an algorithm that reduces computation effectively and controls computational amount and prediction quality, while keeping prediction quality as almost the same as that of the full search. The proposed algorithm uses multiple thresholds for partial block sum and times of counting unchanged minimum position for each step. It also calculates the partial block matching error, removes impossible candidates early, implements fast motion estimation by comparing times of keeping the position of minimum error for each step, and controls prediction quality and computation easily by adjusting the thresholds. The proposed algorithm can be combined with conventional fast motion estimation algorithms as well as by itself, further reduce computation while keeping the prediction quality as almost same as the algorithms, and prove it in the experimental results.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.181-188
• /
• 2016

Video streaming traffics which are arrived in receiver have irregular traffic patterns by many problems over the network path. Particularly, if these received traffics enter into replay buffer without any operation, the overflow and underflow effects are made according to the buffer status. There was an existing scheme which automatically set up token bucket parameters using the video information file under the assumption of the lossless packet on network. The existing scheme has a problem which can set up the wrong token bucket parameters by the lost packets on the practical networks with video packet loss. Therefore, this paper proposes a new scheme which reset up video file information to correct the wrong token bucket parameters in case of packet loss in practical networks with packet loss. Through the simulation, it was found that the proposed scheme would have better performance than the existing scheme in terms of overflow generation and packet loss.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.64-72
• /
• 1998

In this paper, the design of a current integrator for low-voltage, low-power, and high frequency applications using complementary high swing cascode current-mirror is presented. The proposed integrator decreases output current errors due to non-zero input resistance and non-infinite output resistance of the simple current integrator. As a design example, the 3rd order Butterworth lowpass filter is designed by a leapfrog method. Also, we apply the predistortion design method to reduce the magnitude distortion which occurs at a cutoff frequency by the undesirable phase shift of a lossless current integrator. The designed current-mode filter is simulated and examined by SPICE using 0.8$\mu\textrm{m}$ CMOS n-well process parameters. The simulation results show 20MHz cutoff frequency and 615㎼ power dissipation with a 2V power supply. And the cutoff frequency of the filters can be easily changed by the DC bias current.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.774-777
• /
• 2005

In this paper, a constant frequency phase shifting PWM controlled voltage source full bridge-type series load resonant high-frequency inverter using the IGBT power modules is presented for innovative consumer electromagnetic induction heating applications such as a hot water producer, steamer and super heated steamer. The full bridge arm side link passive quasi-resonant capacitor snubbers in parallel with the each power semiconductor device and high frequency AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is discussed and evaluated on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency soft switching PWM inverter topology, what is called class DE type. including the variable-power variable-frequency(VPVF) regulation function can expand zero voltage soft switching commutation range even under low output power setting ranges, which is more suitable and acceptable for induction heated dual packs fluid heater developed newly for consumer power utilizations. Furthermore, even in the lower output power regulation mode of this high-frequency load resonant tank high frequency inverter circuit it is verified that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1624-1635
• /
• 1996

Palletized color images are the dominant type of the image used on Internet and World-Wide Web. In spite of this, most image compression and progressive transmission algorithm have been designed for continuous-tone images. Pallettize images. Palletized images differ from continuous-tone images in such a aspect that values are lookup table indices a new pyramid structure for compression and progressive transmission of a palletized image. In the proposed pyramid structure, the color of a node at higher level is the one that occupies the most part in 4 sons and each node is represented by a type code and several color codes. Since the proposed method do not exploit spatial correlation in an image, it is ideally applied to lossless compression and progressive transmission of palletized images. We have confirmed this through the experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.714-725
• /
• 1997

This paper proposes an image compression method using the wavelet transform and bit-plane coding of wavelet coefficients. The hierarchical application of wavelet transform to an image produces one low resoluation(the subband with lowest frequency) image and several high frequency subbands. In the proposed method, the low resolution image is compressed by a lossless method at 8 bits per each coefficient. However, the high frequency subbands are decomposed into 8 bit planes. With an adptive block coding method, the decomposed bit planes are effectively compressed using localized edge information in each bit plane. In addition, the propsoed method can control bit rates by selectively eliminating lessimportant subbands of low significant bit planes. Experimental results show that the proposed scheme has better performance in the peak signal to noise ratio (PSNR) and compression rate than conventional image coding methods using the wavelet transform and vector quantization.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.89-97
• /
• 2007

This paper presents a new circuit topology of active edge resonant snubbers assisted half-bridge soft switching PWM inverter type DC-DC high power converter for DC bus feeding power plants. The proposed DC-DC power converter is composed of a typical voltage source-fed half-bridge high frequency PWM inverter with a high frequency planar transformer link in addition to input DC busline side power semiconductor switching devices for PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC-DC converter treated here is described by using switching mode equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC buslines can achieve ZCS turn-on and ZVS turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, a high switching frequency IGBTs can be actually selected in the frequency range of 60 kHz under the principle of soft switching. The performance evaluations of the experimental setup are illustrated practically. The effectiveness of this new converter topology is proved for such low voltage and large current DC-DC power supplies as DC bus feeding from a practical point of view.

• Journal of Power Electronics
• /
• v.4 no.4
• /
• pp.237-245
• /
• 2004

In this paper, a two-switch high frequency flyback transformer linked zero voltage soft switching PWM DC-DC power converter implemented for distributed DC- feeding power conditioning supplies is proposed and discussed. This switch mode power converter circuit is mainly based on two main active power semiconductor switches and a main flyback high frequency transformer linked DC-DC converter in which, two passive lossless quasi-resonant snubbers with pulse current regeneration loops for energy recovery to the DC supply voltages composed of a three winding auxiliary high frequency pulse transformer, auxiliary capacitors and auxiliary diodes for inductive energy recovery discharge blocking due to snubber capacitors are introduced to achieve zero voltage soft switching from light to full load conditions. It is clarified that the passive resonant snubber-assisted soft switching PWM DC-DC power converter has some advantages such as simple circuit configuration, low cost, simple control scheme, high efficiency and lowered noises due to the soft switching commutation. Its operating principle is also described using each mode equivalent circuit. To determine the optimum resonant snubber circuit parameters, some practical design considerations are discussed and evaluated in this paper. Moreover, through experimentation the practical effectiveness of the proposed soft switching PWM DC-DC power converter using IGBTs is evaluated and compared with a hard switching PWM DC-DC power converter.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.586-594
• /
• 2003

X-Match algorithm is a lossless compression algorithm suitable for hardware implementation owing to its simplicity. It can compress 32 bits per clock cycle and is suitable for real time compression. However, as the bus width increases 64-bit, the compression unit also need to increase. This paper proposes the cooperative parallel X-Match (X-MatchCP) algorithm, which improves the compression speed by performing the two X-Match algorithms in parallel. It searches the all dictionary for two words, combines the compression codes of two words generated by parallel X-Match compression and outputs the combined code while the previous parallel X-Match algorithm searches an individual dictionary. The compression ratio in X-MatchCP is almost the same as in X-Match. X-MatchCP algorithm is described and simulated by Verilog hardware description language.