• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.513-524
• /
• 2005

This study was conducted to introduce recycling procedures of food waste(FW) as feed according to the dehydration, semi-dehydration fermentation and liquid fermentation methods through the on-site survey of companies related, to trace physico-chemical components and nutritional losses depending upon the processing stage for each method and finally to suggest more desirable methodology for the efficient utilization of FW as animal feed. For the dehydration method, dewatering of FW alone reduced(P<0.05) moisture(approximately 10%) and ether extract contents and increased(P<0.05) fiber contents. Dewatering and subsequent dehydration of FW decreased(P<0.05) contents of ether extract, limiting amino acids such as lysine, methionine and histidine, pepsin digestibility of protein by half, and NaCl content by 40%, increased(P<0.05) contents of fiber, crude ash, Ca and P, and did not alter(P>0.05) pH. The semi-dehydration fermentation method of FW did not affect(P>0.05) the chemical components, pepsin digestibility of protein, pH and NaCl content. For the liquid fermentation method, pasteurization and fermentation of FW decreased(P<0.05) contents of dry matter, ether extract, crude fiber, lysine and NaCl; however, it did not affect(P>0.05) other chemical components, pepsin digestibility of protein and pH. Among the processing methods, nutrient losses were highest for the dehydration method(25% of metabolizable energy loss, 12% of organic matter loss) and little for the semi-dehydration and liquid fermentation methods. The on-site survey of companies related revealed that the existence of foreign materials in FW products were problematic for all the three companies surveyed, thus it was necessary to develop a more efficient screener. Before feeding FW-containing diets to pigs, high quality of protein and energy feedstuffs needed to be fortified for the dehydration method. For the semi-dehydration fermentation method, the scientific diet formulation technology was required at the initial mixing stage. For the liquid fermentation method, possibly most energetic and proteinaceous feeds needed to be supplemented for the normal animal growth.

• the MEAT Journal
• /
• s.36 summer
• /
• pp.61-71
• /
• 2009

The aim of this work was to analyze the effects of salt and NaNO2 on weight loss, proximate compositions, chemical parameters and texture characteristics of dry-cured ham processed using Korean methods. Four different treatments were considered: The H8 group of 3 hams (11.30 kg) was salted with 9.2 g/kg salt (w/w) (high salt batch), the HS+NaNO2 group of 3 hams (10.65 kg) was salted same as HS group and added 100 ppm NaNO2. The LS group of 3 hams (11.42 kg) was salted with 6.2 g/kg salt (w/w) (Low salt batch), the LS+NaNO2 group of 3 hams (10.62 kg) was salted same as L8 group and added 100 ppm NaNO2. The highest weight losses took place at the drying stage (27.46, 28.25, 26.99, and 28.42%). However, there were no significant differences in the weight losses between treatments (p>0.05). The moisture content was significantly affected with addition of NaNO2 (p<0.05), the L8 hams had significantly higher moisture content than HS + NaNO2 and L8 + NaNO2 (p<0.05). The level of salt and NaNO2 did not affect the fat, protein and ash contents. The hardness and chewiness in biceps femoris muscle from L8 hams were significantly lower than in the muscles from HS + NaNO2 hams (p<0.05). The NaNO2 did not affect the texture characteristics of dry-cured hams. The processing conditions significantly affected the chemical parameters of biceps femoris muscle (p<0.05). The water activity in biceps femoris muscle from L8 hams was significantly higher than in muscles from HS and H8+NaNO2 hams (p<0.04). The salt content in biceps femoris muscles from LS + NaNO2 hams was significantly lower than in the muscles from HS and HS + NaNO2 hams (p<0.05). The NaNO2 treatment did not affect the NaNO2 content in biceps femoris muscles (p>0.05). The processing conditions did not significantly affect the lightness (L), redness (a), and $h^{\circ}$ of biceps femoris muscles (p>0.05). The yellowness (b) and chroma in biceps femoris muscle from HS + NaNO2 hams were significantly higher than in the muscles from HS and LS hams.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.493-498
• /
• 2008

The aim of this work was to analyze the effects of salt and $NaNO_2$ on weight loss, proximate compositions. chemical parameters and texture characteristics of dry-cured ham processed using Korean methods. Four different treatments were considered: The HS group of 3 hams (11.30 kg) was salted with 9.2 g/kg salt (w/w) (high salt batch), the HS+$NaNO_2$ group of 3 hams (10.65 kg) was salted same as HS group and added 100 ppm $NaNO_2$. The LS group of 3 hams (11.42 kg) was salted with 6.2 g/kg salt (w/w) (Low salt batch), the LS+$NaNO_2$ group of 3 hams (10.62 kg) was salted same as LS group and added 100 ppm $NaNO_2$. The highest weight losses took place at the drying stage (27.46, 28.25, 26.99, and 28.42%). However, there were no significant differences in the weight losses between treatments (p>0.05). The moisture content was significantly affected with addition of $NaNO_2$ (p<0.05), the LS hams had significantly higher moisture content than HS+$NaNO_2$ and LS+$NaNO_2$ (p<0.05). The level of salt and $NaNO_2$ did not affect the fat, protein and ash contents. The hardness and chewiness in biceps femoris muscle from LS hams were significantly lower than in the muscles from HS+$NaNO_2$ hams (p<0.05). The $NaNO_2$ did not affect the texture characteristics of dry-cured hams. The processing conditions significantly affected the chemical parameters of biceps femoris muscle (p<0.05). The water activity in biceps femoris muscle from LS hams was significantly higher than in muscles from HS and HS+$NaNO_2$ hams (p<0.05). The salt content in biceps femoris muscles from LS+$NaNO_2$ hams was significantly lower than in the muscles from HS and HS+$NaNO_2$ hams (p<0.05). The $NaNO_2$ treatment did not affect the $NaNO_2$ content in biceps femoris muscles (p>0.05). The processing conditions did not significantly affect the lightness (L), redness (a), and $h^{\circ}$ of biceps femoris muscles (p>0.05). The yellowness (b) and chroma in biceps femoris muscle from HS+$NaNO_2$ hams were significantly higher than in the muscles from HS and LS hams.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.191-199
• /
• 2000

This study was initiated to investigate the influence of biophysical condition on the composting characteristics, and conducted to develop technology for using recycled compost as a bulking agent cost to reduce operating cost. To methods of aeration, continuous aeration (CA: run No. I) and intermittent aeration (IA: run No. 2) were performed with three 12.3 liter laboratory scale vessels for ten days. Manure and rice hulls were mixed for thirst trial (I), rice hulls and recycled compost after first trial were mixed for second trial (II), dairy manure and only recycled compost after second trial were mixed for third trial (III). During the composting process, temperatures of the compost mass and ammonia emissions were measured. The quality and maturity of compost were ascertained by examining the characteristics and composition of the compost. Also, loss of mass was determined by measuring the mass of materials in the vessels before and after composting. The results in this study are as follows: 1. The periods of optimum temperature ($>55^{\circ}C$) to kill pathogens were maintained from 38 to 78 hours for CA and from 60 to 98 hours for IA. 2. The more recycled compost mixed, the more ammonia emitted. The maximum ammonia emissions were 287 ppm at CA and 420 ppm at IA. 3. Biofiltration system was required for the compo sting system using only recycled compost as an amendment, because the ammonia emissions was produced above 100 ppm at the end of composting process. 4. The quality and maturity of compost: - Fresh compost, were required drying, because moisture contents of the compost were approximately 70% in all tests. - The pH values were observed to rise smoothly, from 7.9 to 8.3 at CA and from 8.4 to 8.6 at IA. The CfN ratios of the fresh compost were ranged form 21.05 to 16.42 for CA and from 22.81 to 14.75 for IA. The final C/N ratios for test II and III were below 20.were below 20.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.260-266
• /
• 2008

Small lysimeter experiment under rain shelter plastic film house was conducted to investigate the effect of soil characteristics on the leaching and soil solution concentration of nitrate and phosphate. Three soils were obtained from different agricultural sites of Korea: Soil A (mesic family of Typic Dystrudepts), Soil B (mixed, mesic family of Typic Udifluvents), and Soil C (artificially disturbed soils under greenhouse). Organic-C contents were in the order of Soil C ($32.4g\;kg^{-1}$) > Soil B ($15.0g\;kg^{-1}$) > Soil A ($8.1g\;kg^{-1}$). Inorganic-N concentration also differed significantly among soils, decreasing in the order of Soil B > Soil C > Soil A. Degree of P saturation (DPS) of Soil C was 178%, about three and fifteen times of Soil B (38%) and Soil A (6%). Prior to treatment, soils in lysimeters (dia. 300 mm, soil length 450 mm) were tabilized by repeated drying and wetting procedures for two weeks. After urea at $150kg\;N\;ha^{-1}$ and $KH_2PO_4$ at $100kg\;P_2O_5\;ha^{-1}$ were applied on the surface of each soil, total volume of irrigation was 213 mm at seven occasions for 65 days. At 13, 25, 35, 37, and 65 days after treatment, soil solution was sampled using rhizosampler at 10, 20, and 30 cm depth and leachate was sampled by free drain out of lysimeter. The volume of leachate was the highest in Soil C, and followed by the order of Soils A and B, whereas the amount of leached nitrate had a reverse trend, i.e. Soil B > Soil A > Soil C. Soil A and B had a significant increase of the nitrate concentration of soil solution at depth of 10 cm after urea-N treatment, but Soil C did not. High nitrate mobility of Soil B, compared to other soils, is presumably due to relatively high clay content, which could induce high extraction of nitrate of soil matrix by anion exclusion effect and slow rate of water flow. Contrary to Soil B, high organic matter content of Soil C could be responsible for its low mobility of nitrate, inducing preferential flow by water-repellency and rapid immobilization of nitrate by a microbial community. Leached phosphate was detected in Soil C only, and continuously increased with increasing amount of leachate. The phosphate concentration of soil solution in Soil B was much lower than in Soil C, and Soil A was below detection limit ($0.01mg\;L^{-1}$), overall similar to the order of degree of P saturation of soils. Phosphate mobility, therefore, could be largely influenced by degree of P saturation of soils but connect with apparent leaching loss only more than any threshold of P accumulation.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2010

We investigated the effect of freezing on changes in the chemical components of semi-dried red pepper (SDRP). We used storage temperatures of $0^{\circ}C,\;-10^{\circ}C,\;-20^{\circ}C,\;and\;-70^{\circ}C$. After 30 days of storage, capsaicin content had decreased by 40% at $0^{\circ}C$ and by 21% at $-20^{\circ}C$. Initial vitamin C content was 1,358.02 mg%. Compared with control, the $0^{\circ}C$ storage group showed a significant decrease in vitamin C content but no such decrease was noted in the $-20^{\circ}C$ and $-70^{\circ}C$ storage groups after 30 days. ASTA values were not influenced by storage temperature or period, in agreement with previous results. We concluded that storage was effective at temperatures of less than $-20^{\circ}C$. Next, both dried red pepper (DRP) and SDRP were stored at $-20^{\circ}C$ for 12 months. DRP had the lower level of capsaicinoids (55.01 mg%) owing to the long drying time. After 12 months, SDRP capsaicinoid had decreased by 30-33%, compared with a decrease of 54% in DRP. Initial vitamin C contents were 721.48 and 955.25 mg% in DRP and SDRP, respectively, and, after 12 months, vitamin C loss in the SDRP group (37%) was less than that in fresh red pepper (FRP) samples (45%). Initial $\beta$-carotene content was greatest in the FRP group (259.82 mg%), and that of DRP decreased by 20% after 12 months. The color a/b value of SDRP (1.40) was greater than that of DRP (1.00).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.248-256
• /
• 2018

Reduction in the occurrence of weed and erosion of slope soil by living mulch barley simultaneously sown with soybean were investigated at the Upland Experimental Field in Suwon City in 2013 and 2014. The aboveground dry matter of 200-300, 100-200 kg/10a of living mulch barley was obtained at 40 and 60 after sowing, respectively. The occurrence of weeds was significantly reduced by barley living mulch. The early growth of soybean was reduced significantly because of the competition with barley living mulch, but the late growth of soybean after natural drying of barley living mulch was recovered considerably. The soybean grain yield with barley living mulch was similar to that of the normal soybean cultivation, showing no significant difference between no mulch and living mulch treatments. With respect to soil erosion on the slope soil, the amount of run-off water decreased by 20-50% and the amount of soil loss decreased by 70-90% by barley living mulch. The reduction in soil erosion by the use of plastic film + barley living mulch was similar to that of only barley living mulch. The barley living mulch in soybean production can be a promising cultivation technique as it reduces weed occurrence and soil erosion without grain yield reduction.