• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.255-260
• /
• 2013

In this paper, we propose the effective bit expansion of FFT module for improving the accuracy of correlation result of the Daejeon correlator. The Daejeon correlator based on FPGA was implemented in order to fast data processing with the fixed-point of FFT operation. In correlation result, however, the phenomenon of phase concentration to 0 degree was appeared in lower frequency area of bandwidth due to lack of operational bit. This phenomenon has an affect on the accuracy of correlation result by introducing the effect of data loss because of excluding phase concentration during analysis of observed radio source. In order to improving the accuracy of correlation result we carried out the simulation by expanding bit-number than 16-bit operation of previous FFT module within given resource limits of FPGA. Through the simulation results, the effective bit number for FFT module within used FPGA resource limits is able to expand, and we confirmed that the operational 20-bit of FFT module is effective for improving accuracy of correlation result by comparing with experimental result.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.799-806
• /
• 1995

The steady shear and small amplitude oscillatory dynamic rheological properties of citrus pectin $([\eta]=3.75\;dL/g)$ were characterized for a wide range of pectin concentrations $({\sim}6%)$. The typical power-law flow was observed above 2.0% concentration, and the shear rate dependence of viscosity increased with pectin concentration. The transition from dilute to concentrated regime, determined from the double logarithmic plot of ${\eta_{sp.o}}\;vs\;C[\eta]$, occurred at a critical coil overlap parameter $C^{*}[\eta]\approx4.0$, at which ${\eta_{sp.o}}$ corresponded to approximately 10.0. The slopes of ${\eta_{sp.o}}\;vs\;C[\eta]$, at $C[\eta]\;at\;C[\eta]C^{*}[\eta]$were 1.1 and 4.5, respectively. The steady viscosity $(\eta)$ displayed a good superposition at ${\eta}/{\eta}_o\;vs\;{\gamma}/{\gamma}_{0.8}$ relation with an exception of high concentration (6%), which arised from the significant deviation of flow behavior index (n values of $\eta_{a}=K\gamma^{n-1}$) at high concentration. Dynamic measurements showed that the loss modulus $(G^{\prime\prime})$ was much higher than the storage modulus $(G^\prime)$for all concentrations studied, indicating predominant viscoelastic liquid-like behavior of pectin solutions. The frequency dependence of $G^\prime$ was higher than that of $G^\prime\prime$ at the same concentration, whose trend was more pronounced with decreasing pectin concentration. The shear viscosity $(\eta)$ was almost identical to the complex viscosity $(\eta^{*})$ at low concentration, following the Cox-Merz rule, but they became increasingly different at high concentration.

• Herbal Formula Science
• /
• v.9 no.1
• /
• pp.35-82
• /
• 2001

In the Encyclopedia Medica Koreana(Dongeuibogam), I have researched 245 prescriptions in which Panax Ginseng plays an important role. And I have got the following results. The healing scope and frequency of ginseng-mainly-included prescriptions are Child Part 29(11.83%), Violent Cough Part 23(9.38%), Sick-by-Cold Part 21(8.57%), Oncosis Part 16(6.53%), Overwork Part 14(5.71%), Gynecologic Part 14(5.71%), Internal Part 13(5.3%), Apoplexy Part 11(4.48%), Mind Part 10(4.08%) and Fecal Part 10(4.08%) prescriptions. And also each of Nausea Part, Anger Part, and Spirit parts has the same 5 (2.04%) prescriptions. And each of Qi Part, Diabetes Meatus Part, Malaria Part, and Humoral Part has 4(1.63%) prescriptions. And each of Foot Part, Choleraic Part, Genital Part, Blood Part, and Voice Part has 3 (1.2%). All of these prescriptions cover 88.88%. And besides listed parts above, Panax Ginseng is all used in 48 Parts: Body-Mind Part. Mouth-Tongue Part, Breast Part, Muscle Part, Swelling Part, Urine Part, Epidermis Part, Heat Part, Anus Part, Stomach Part, Eye Part, Laryngopharynx Part. Uterus Part" Heavy Stomach Part, Head Part, Pulse Part, Hair Part, Navel Part, Emetic Part, Costal Part, Edema Part, Vomiting Part, Superstitious Part, and Cardiac Part, etc. Of the prescriptions in which Panax Ginseng plays an important role, the most representative diseases, which more than 86.8% prescriptions cure, are shock, numbness from cold, Taeeum disease, oncosis, overwork, sick from eating, numbness of extremities, diarrhea, tachycardia, forgetfulness, nausea, heat from kidney, nocturnal emission, short breath, diabetes meatus, malaria, sweating, sweating overnight, beriberi, cholera, insomnia from enervation, sialitis, navel pain, hemorrhage, and loss of voice. The pathology of the prescriptions in which Panax Ginseng plays an important role is divided into the organ problems, six natural factors, seven extreme feelings, unbalanced humoral status, overwork, and, unbalance of qi and blood. Spleen, heart, and uterus is the main cause of organ problems; wind and cold are the main cause of six natural factors; heavy humors are the main cause of unbalanced humoral status; the stasis of seven feelings are the main cause of seven extreme feelings; the lack of stamina and overwork are the main cause of the overwork; the lack of qi, the lack of blood, and, the lack of qi and blood are the main cause of the unbalance of qi and blood. After I have researched the contents of the prescriptions in which Panax Ginseng plays an important role, I could understand the addition of the different prescriptions, combination of medicines, and the role of medicine groups associated with Panax Ginseng. So from now on, the results I have got could be used as the data which show the theoretical basis on the prescriptions.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.227-236
• /
• 2020

Purpose: Image artifacts caused by patient motion cause problems in cone-beam computed tomography (CBCT) because they lead to distortion of the 3-dimensional reconstruction. This prospective study was performed to quantify patient movement during CBCT acquisition and its influence on image quality. Materials and Methods: In total, 412 patients receiving CBCT imaging were equipped with a wireless head sensor system that detected inertial, gyroscopic, and magnetometric movements with 6 dimensions of freedom. The type and amplitude of movements during CBCT acquisition were evaluated and image quality was rated in 7 different anatomical regions of interest. For continuous variables, significance was calculated using the Student t-test. A linear regression model was applied to identify associations of the type and extent of motion with image quality scores. Kappa statistics were used to assess intra- and inter-rater agreement. Chi-square testing was used to analyze the impact of age and sex on head movement. Results: All CBCT images were acquired in a 10-month period. In 24% of the investigations, movement was recorded (acceleration: >0.10 [m/s²]; angular velocity: >0.018 [°/s]). In all examined regions of interest, head motion during CBCT acquisition resulted in significant impairment of image quality (P<0.001). Movement in the horizontal and vertical axes was most relevant for image quality (R²>0.7). Conclusion: Relevant head motions during CBCT imaging were frequently detected, leading to image quality loss and potentially impairing diagnosis and therapy planning. The presented data illustrate the need for digital correction algorithms and hardware to minimize motion artefacts in CBCT imaging.

• Journal of Periodontal and Implant Science
• /
• v.42 no.5
• /
• pp.173-178
• /
• 2012

Purpose: The main purpose of this study was to investigate bone thickness on the buccal and palatal aspects of the maxillary canine and premolars using cone-beam computed tomography (CBCT). The differences between left- and right-side measurements and between males and females were also analyzed. Methods: The sample consisted of 20 subjects (9 males and 11 females; mean age, $21.9{\pm}3.0$) selected from the normal occlusion sample data in the Department of Orthodontics, The Catholic University of Korea. The thickness of the buccal and palatal bone walls, perpendicular to the long axis of the root were evaluated at 3 mm and 5 mm apical to cemento-enamel junction (CEJ) and at root apex. Results: At the canines and first premolars regions, mean buccal bone thickness of at 3 mm and 5 mm apical to CEJ were less than 2 mm. In contrast, at the second premolar region, mean buccal bone thickness at 3 mm and 5 mm apical from CEJ were greater than 2 mm. Frequency of thick bone wall (${\geq}2mm$) increased from the canine to the second premolar. Conclusions: This result should be considered before tooth extraction and planning of rehabilitation in the canine and premolar area of maxilla. Careful preoperative analysis with CBCT may be beneficial to assess local risk factors and to achieve high predictability of success in implant therapy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1797-1806
• /
• 1998

Future satellite communication systems will be developed at Ka-band (20/30 GHz) owing to the relatively wide frequency allocation and current freedom from terrestrial interference for multimedia services. A serious disadvantage of the Ka-band, however, is the very high atmospheric attenuation in rainy weather. Synchronous CDMA drastically redces the effect of self-noise with several interesting features of CDMA for mobile communications such as fixible freuqncy rese, the capability of performin soft-handover and a lower sensitivity to interference. This paper evaluates the performance of a synchronous CDMA reture link for a Ka-band geostationary satellite communication system. For a fixed satellite channel whose characteristics depend on weather conditions, the signal envelope and phase for this channel is modelled as Gaussian. The bit error and outage probability, and the detection loss due to imperfect chip timing synchronization is analytically evaluated and the system capacity degaradation due to the weather condition is estimated. The two cases consist of the general case in which all users are affected by rain condition, and the worst case in which the reference user is only affected by rain attenuation. the results for two cases of rain condition clearly show that synchronous CDMA eases the power control requirements and has less sensitivity to imperfect power control.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2005

For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.8-14
• /
• 1995

The magnetic properties of an $Fe_{87}Zr_{7}B_{5}Ag_{1}$(at.%) amorphous alloy have been investigated as a function of annealing temperatures to clarify its application potential as a core material for high-frequency use by adding a small amount of insoluble element of Ag. A new excellent soft magnetic material was developed. The amorphous alloy produced by relatively low temperature annealing at $T_{a}=400^{\circ}C$ exhibited very high initial permeability$(\mu_{i})$ of 288,000 at 1kHz and 2mOe, very low coercivity$(H_{c})$ of 15mOe and low core loss$(W_{c})$ of 50W/kg at 100kHz and 1,000G which is comparable with Co-based amorphous alloys, respectively. It is notable that the values obtained in the present study are the best magnetic properties among various kinds of Fe-based soft amorphous materials reported up to date. The reasons for the achievement of good soft magnetic properties are presumably due to the homogeneous formation of very fine $\alpha$-Fe clusters with the size of 2~3nm in an amorphous matrix, which can be deduced from the increase of resistivity and the TEM observation. The very fine $\alpha$-Fe clusters embedded in an amorphous matrix had a great influence on reduction of magnetostriction and refinement of magnetic domain.

• Journal of Korean Medicine for Obesity Research
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2004

Objectives: The effects of peroxisome proliferator-activated receptor ${\gamma}2\;(PPAR{\gamma}2)$ Pro12Ala (P12A) polymorphism on body mass index (BMI) and type 2 diabetes are well documented; however, until now, only a few studies have evaluated the effects of this polymorphism on body fat distribution. This study was conducted to elucidate the effects of this polymorphism on computed tomography (CT)-measured body fat distribution and other obesity-related parameters in Korean female subjects. Methods & Results: The frequencies of $PPAR{\gamma}2$ genotypes were: PP type, 93.0%; PA type, 6.8%; and AA type, 0.2%. The frequency of the A allele was 0.035. Body weight (P .012), BMI (P .012), and waist-to-hip ratio (WHR) (P .001) were significantly higher in subjects with PA/AA compared with subjects with PP. When body composition was analyzed by bioimpedance analysis, lean body mass and body water content were similar between the 2 groups. However, body fat mass (P .003) and body fat percent (P .025) were significantly higher in subjects with PA/AA compared with subjects with PP. Among overweight subjects with BMI of greater than 25, PA/AA was associated with significantly higher abdominal subcutaneous fat (P .000), abdominal visceral fat (P .031), and subcutaneous upper and lower thigh adipose tissue (P .010 and .013). However, among lean subjects with BMI of less than 25, no significant differences associated with $PPAR{\gamma}2$ genotype were found, suggesting that the fat-accumulating effects of the PA/AA genotype were evident only among overweight subjects, but not among lean subjects. When serum lipid profiles, glucose, and liver function indicators were compared among overweight subjects, no significant difference associated with $PPAR{\gamma}2$ genotype was found. Changes in body weight, BMI, WHR, and body fat mass were measured among overweight subjects who finished a 1-month weight lose program of a hypocaloric diet and exercise; no significant differences associated with $PPAR{\gamma}2$ genotype were found. Conclusions: The results of this study suggest that the $PPAR{\gamma}2$ PA/AA genotype is associated with increased subcutaneous and visceral fat areas in overweight Korean female subjects, but does not significantly affect serum biochemical parameters and outcomes of weight loss programs.

• Food Science of Animal Resources
• /
• v.23 no.3
• /
• pp.221-226
• /
• 2003

This study investigated the effect of different electrical stunning methods on pH, water holding capacity(WHC), cooking loss(CL), meat color and blood spot rate in broilers. One-hundred and forty broiler chickens were slaughtered by 50, 65 and 90 voltage with the same electrical frequency(255 Hz) and stunning time(5 sec) in commercial abattoir. The ultimate pH of leg muscle and WHC of breast muscle decreased with increasing the stunning voltage. However, there were no significant differences in ultimate pH, WHC and CL of breast muscle, and ultimate pH of leg muscle. Lightness(L*) and yellowness(b*) values of leg muscle stunned with 90V, 255 Hz, 5 sec were higher than those stunned with 50V, 255 Hz for 5 sec(p<0.05). But there were no significant differences in color value on skin, breast and wing muscle. Our experiments showed that change of stunning voltage affected some broiler meat quality parameters. However, further research is necessary to examine the effects of stunning condition on broiler meat quality.