• 제목/요약/키워드: loss curves

검색결과 270건 처리시간 0.026초

질량비가 작은 접촉쌍성 HN UMa와 II UMa - III (LOW MASS RATIO CONTACT BINARY SYSTEMS HN UMa AND II UMa - III)

  • 이우백;김호일;강영운;오규동
    • Journal of Astronomy and Space Sciences
    • /
    • 제23권3호
    • /
    • pp.189-198
    • /
    • 2006
  • BVRI CCD 측광 관측에 의하여 질량비가 작은 접촉쌍성 HN UMa와 II UMa의 새로운 광도곡선을 얻었다. 새로운 광도곡선과 이미 발표된 분광관측으로부터 Wilson-Devinney 프로그램을 이용하여 이 두 별의 궤도요소와 절대 물리량을 얻었다. HN UMa와 II UMa를 포함한 절대물리량이 잘 알려진 21개의 질량비가 작은 접촉쌍성들의 진화 상태를 조사하였다. 그 결과 질랑비가 작은 접촉쌍성의 반성은 영년주계열 아래 놓이며, 이러한 현상은 질량이 작은 접촉쌍성의 반성에서의 질량손실을 가정할 경우, 비록 작의 양의 질량이지만 반성에서의 질량 감소는 상대적으로 광도의 감소가 현저히 작아지기 때문일 것으로 예상된다.

ABAQUS를 이용한 강섬유보강 콘크리트 패널의 고속 충돌 거동 해석 (Analysis of High Velocity Impact on SFRC Panels Using ABAQUS)

  • 손석권;장석준;윤현도;김용환
    • 콘크리트학회논문집
    • /
    • 제28권2호
    • /
    • pp.141-148
    • /
    • 2016
  • 본 논문은 구형 비상체에 의한 충격하중을 받는 강섬유보강 콘크리트 패널의 거동에 대해 유한요소법을 사용하여 연구를 수행하였다. 강섬유보강 콘크리트의 재료 물성치와 비선형구간에 대한 응력-변형 관계는 압축시험과 휨시험을 통해 구하였다. 여러가지 변수 중, 강섬유 체적비와 패널의 두께에 따른 해석을 수행하였고 실험결과와 비교하였다. 강섬유를 혼입함으로써 콘크리트 패널의 방호성능이 향상됨을 확인하였다. 강섬유를 혼입하면 중량 및 면적손실률이 감소하는 효과가 있다. 또한, 유한요소법을 이용하여 파단모드에 대해 예상하였으며 그 결과는 실험과 유사한 경향을 보였다. 이 결과들은 방호 목적의 군용 건물과 기타 건축물의 고속 비상체에 대한 보호를 위한 설계에 대해 적용될 수 있음을 제시하였다.

한국 지형에서의 무선호출 주파수 대역의 전계강도 예측모델 (The Path Loss Prediction in Korean Terrain Environment)

  • 이형수;조삼모
    • 한국전자파학회논문지
    • /
    • 제7권3호
    • /
    • pp.219-229
    • /
    • 1996
  • 육상 이동통신의 서비스 범위 예측에 가장 기본이 되는 전송 손실 계산 방식은 그 적용범위 및 모델도출 방법에 따라 많은 발전을 거듭하여 왔다. 그러나, 전파는 이것이 지나가는 환경, 즉 빌딩의 특성이나, 나무, 그리고 지형형태 등에 의해 너무나 많은 영향을 받으므로 미국,일본 동 외국의 환경에서 만들어져 국내에 도입된 전파 예측모델들은 우리나라의 실정에 적합하지 않는 점이 많다. 본 논문에서는 국내 지형을 분석하여 그 특성에 따라 여섯가지의 종류로 분류하고 각각에 해당하는 국내 지역을 선정하여 무선호출 주파수 대역에서 전계강도 측정을 수행하였다. 또한, 이 측정 데이타를 이용한 실험식과 함께 산악지역에서의 회절 계산식을 포함하여 가시거리 및 비가시거리를 구분하여 전계강도를 계산하는 예측모델을 만들었다. 제안된 모델을 국내 지형 데이타 베이스와 연결하여 전계강도 예측을 수행한 값과 실측된 데이타와 비교한 결과, 최소 3dB에서 최고 9dB 정도로 오차가 나타났으므로 실용성이 있을 것으로 판단된다.

  • PDF

CFD를 이용한 해수냉각펌프의 내부유동 분석 (Internal Flow Analysis of Seawater Cooling Pump using CFD)

  • ;양창조;김부기;김준호
    • 해양환경안전학회지
    • /
    • 제23권1호
    • /
    • pp.104-111
    • /
    • 2017
  • 본 연구는 원심펌프 내부 유동장 특성에 대한 시뮬레이션 및 시각화에 중점을 둔다. 3D 수치해석은 Reynolds Average Navier-stock 코드를 k-${\varepsilon}$ 표준 2차방정식 난류 모델로 처리하여 수행하였다. 시뮬레이션은 흡입측, 임펠러, 토출측 영역에서 조도로 인한 마찰 손실과 임펠러 웨어링에서 체적 손실을 포함한다. 해석과 실험사이의 성능곡선 비교결과 최대 5 %의 작은 차이를 보이며 동일한 추세를 나타냈다. 최고 효율점에서 속도 벡터는 고르게 나타났지만 비 설계점에서는 현저한 변화가 나타났고, 텅 부근의 임펠러 유로토출부에서 강력한 재순환 영역이 나타났다. 비교적 일정한 압력분포가 텅 부근임에도 불구하고 임펠러 주위에 관찰되었다. 볼류트 내에서 기하학적으로 인해 형성된 나선형 와류가 이 영역에서 유동장이 상대적으로 난류이고 불안정하다는 것을 증명하였다.

두 종류의 부하곡선에 관한 공급지장시간기대치(LOLE)의 상호 변환관계성 (Conversion Function and Relationship of Loss of Load Expectation Indices on Two Kinds of Load Duration Curve)

  • 이연찬;오웅진;최재석;차준민;최홍석;전동훈
    • 전기학회논문지
    • /
    • 제66권3호
    • /
    • pp.475-485
    • /
    • 2017
  • This paper develops a conversion function and method transforming from daily peak load curve used $LOLE_D$ [days/year] to hourly load curve used $LOLE_H$[hours/year]and describes relationship between $LOLE_D$ [days/year] and $LOLE_H$ [hours/year]. The indices can not only be transformed just arithmetically but also have different characteristics physically because of using their different load curves. The conversion function is formulated as variables of capacity and forced outage rate of generator, hourly load daily load factor and daily peak load yearly load factor, etc. Therefore, the conversion function (${\gamma}={\varphi}$(.)) can not be simple. In this study, therefore, the function is formulated as linear times of separated two functions. One is an exponential formed conversion function of daily load factor. Another is formulated with an exponential typed conversion function of daily peak load yearly load factor. Futhermore, this paper presents algorithm and flow chart for transforming from $LOLE_D$[days/year] to $LOLE_H$[hours/year]. The proposed conversion function is applied to sample system and actual KPS(Korea Power System) in 2015. The exponent coefficients of the conversion functions are assessed using proposed method. Finally, assessment errors using conversion function for case studies of sample system and actual system are evaluated to certify the firstly proposed method.

Association between cadmium exposure and hearing impairment: a population-based study in Korean adults

  • Jung, Da Jung
    • Journal of Yeungnam Medical Science
    • /
    • 제36권2호
    • /
    • pp.141-147
    • /
    • 2019
  • Background: The present study aimed to evaluate the clinical association between cadmium exposure and hearing impairment among the Korean population. Methods: This retrospective cross-sectional study used the data obtained from the Korean National Health and Nutrition Examination Survey were used for our study. Finally, 3,228 participants were included in our study, which were then divided into quartiles based on their blood cadmium levels: first quartile (1Q), second quartile (2Q), third quartile (3Q), and fourth quartile (4Q) groups. The hearing thresholds were measured using an automatic audiometer at 0.5, 1, 2, 3, 4, and 6 kHz. Hearing loss (HL) was defined as >25 dB average hearing threshold (AHT). Results: All the groups had 807 participants each. The area under the receiver operating characteristic curves of cadmium level for HL were 0.634 (95% confidence interval [CI], 0.621-0.646). The participants in the 4Q group had higher Low/Mid-Freq, High-Freq, and AHT values than those in the other groups in the multivariate analysis after adjusting for confounding factors. The logistic regression showed that the OR for HL per $1{\mu}g/L$ increase in cadmium was 1.25 (95% CI, 1.09-1.44; p=0.002) on the multivariate analysis. Moreover, the multivariate logistic regression analyses revealed that the participants in the 4Q group exhibited a 1.59-, 1.38-, and 1.41-fold higher odds for HL than those in the 1Q, 2Q, and 3Q groups, respectively. Conclusion: High cadmium level quartile was associated with increased hearing thresholds and HL among the Korean adult population.

열중량분석법에 의한 Boron-Potassium Nitrate(BKNO3)의 열분해 특성 연구 (Thermal Decomposition Behavior of Boron-Potassium Nitrate (BKNO3) by TGA)

  • 고청아;김준형;박영철;문영택;서태석;류병태
    • 한국추진공학회지
    • /
    • 제23권2호
    • /
    • pp.104-110
    • /
    • 2019
  • 붕소-질산칼륨($BKNO_3$)의 열분해특성을 비등온방식의 TGA(열중량분석법)를 사용하여 평가하였다. 상온과 $600^{\circ}C$의 온도범위에서 2단계에 걸쳐 질량감소가 발생하는 것이 관찰되었다. 열분해특성에 대한 속도론적 파라메타값들은 TGA로부터의 데이터를 AKTS Thermokinetics 소프트웨어를 사용하여 분석되었다. $200^{\circ}C$에서 $360^{\circ}C$의 온도범위에서 발생하는 1차 무게감소는 바인더 (Laminac/Lupersol)의 열분해에 해당하며, Friedman의 등전환법으로 분석되는 경우 활성화에너지는 120에서 270 kJ/mol 사이의 값을 가진 반면에 2차감소 영역($360-550^{\circ}C$)에서의 활성화에너지 값은 150에서 400 kJ/mol의 범위 내에 있었다.

Simple assessment of wind erosion depending on the soil texture and threshold wind velocity in reclaimed tidal flat land

  • Kyo-Suk, Lee;IL-Hwan, Seo;Jae-Eui, Yang;Sang-Phil, Lee;Hyun-Gyu, Jung;Doug Young, Chung
    • 농업과학연구
    • /
    • 제48권4호
    • /
    • pp.843-853
    • /
    • 2021
  • The objectives of this paper were to simply estimate soil loss levels as caused by wind in reclaimed tidal flat land (RTFL) and the threshold wind velocity in the RTFL. For this experiment, RTFL located at Haenam Bay was selected and a total of 150 soil samples were collected at the Ap horizon from the five soil series. The particle distribution curves, including the limit of the non-erodible particle size (D > 0.84 mm) for each Ap horizon soil, show that the proportions of non-erodible particle sizes that exceeded 0.84 mm were 4.3% (Taehan, TH), 8.9% (Geangpo, GP), 0.5% (Bokchun, BC), 1.6% (Poseung, PS) and 1.4% (Junbook, JB), indicating that the amount of non-erodible soil particles increased with an increase in the sand content. The average monthly, daily and instantaneous wind velocities were higher than the threshold friction velocity (TFV) calculated according to the dynamic velocity (Vd) by Bagnold, while the average monthly wind velocity was lower than those of the TFV suggested by the revised wind erosion equation (RWEQ) and wind erosion prediction system (WEPS). The susceptible proportions of erodible soil particles from the Ap horizon soil samples from each soil series could be significantly influenced by the proportion of sand particles between 0.025 and 0.5 mm (or 0.84 mm) in diameter regardless of the threshold wind velocity. Thus, further investigations are needed to estimate more precisely soil erosion in RTFL, which shows various soil characteristics, as these estimations of soil loss in the five soil series were obtained only when considering wind velocities and soil textures.

Clinical evaluation of 3.0-mm narrow-diameter implants: a retrospective study with up to 5 years of observation

  • InKyung Hwang;Tae-Il Kim;Young-Dan Cho
    • Journal of Periodontal and Implant Science
    • /
    • 제54권1호
    • /
    • pp.44-52
    • /
    • 2024
  • Purpose: This study aimed to evaluate the clinical outcomes of a single type of narrow-diameter implant (NDI) by investigating its survival rate and peri-implant marginal bone loss (MBL). In addition, variables possibly related to implant survival and MBL were investigated to identify potential risk factors. Methods: The study was conducted as a retrospective study involving 49 patients who had received 3.0-mm diameter TSIII implants (Osstem Implant Co.) at Seoul National University Dental Hospital. In total, 64 implants were included, and dental records and radiographic data were collected from 2017 to 2022. Kaplan-Meier survival curves and a Cox proportional hazard model were used to estimate the implant survival rate and to investigate the effects of age, sex, jaw, implant location, implant length, the stage of surgery, guided bone regeneration, type of implant placement, and the surgeon's proficiency (resident or professor) on implant survival. The MBL of the NDIs was measured, and the factors influencing MBL were evaluated. Results: The mean observation period was 30.5 months (interquartile range, 26.75-45 months), and 6 out of 64 implants failed. The survival rate of the NDIs was 90.6%, and the multivariate Cox regression analysis showed that age was associated with implant failure (hazard ratio, 1.17; 95% confidence interval, 1.04-1.31, P=0.01). The mean MBL was 0.44±0.75 mm, and no factors showed statistically significant associations with greater MBL. Conclusions: NDIs can be considered a primary alternative when standard-diameter implants are unsuitable. However, further studies are required to confirm their long-term stability.

방향족 유기화합물의 가스상 시료를 이용한 피복류의 흡착특성 비교에 대한 예비연구 (A preliminary study of sorptive characteristics of aromatic volatile organic compounds (VOC) on clothing materials)

  • 김기현;임문순;박신영;홍윤정;최여진;이유선;김성덕;남상호;옥준석
    • 분석과학
    • /
    • 제19권3호
    • /
    • pp.255-262
    • /
    • 2006
  • 본 연구에서는 VOC가 옷감이나 물질소재와 접촉하여 흡착손실하는 경향을 평가하고자 하였다. 이를 위하여 필터홀더에 필터의 형식으로 비교대상 소재를 장착하고 이들에 VOC 가스를 흘려주는 방식으로 화합물의 흡착손실반응을 평가할 수 있는 기법의 적용 가능성을 다각도로 평가하였다. 테플론 소재의 필터는 양호한 안정성이나 재현성을 보여 주었다. 이러한 시스템에 각각의 소재(글래스 파이버, 면, 나일론)를 장착한 상태로 벤젠, 톨루엔, 자일렌이 혼합된 가스를 흘려 주면서 각각의 검량선을 작성하였다. 본 연구의 결과에 의하면, 각각의 소재 및 VOC 성분별로 뚜렷한 흡착특성을 확인할 수 있었다. 소재들 중에서는 글래스 파이버 < 면 < 나일론의 순서로 그리고 성분별로는 벤젠 < 톨루엔 <자일렌의 순서로 흡착손실이 증가하는 양상이 뚜렷하게 나타났다. 그 결과, 재질이나 화학물질의 특성과 같은 변수가 동시에 흡착손실의 경향성을 결정짓는다는 결론에 도달하였다.