• Korean Management Science Review
• /
• v.17 no.1
• /
• pp.117-134
• /
• 2000

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2004

This paper suggested the vibration characteristic improvement by variation mode of ring type ultrasonic motor. Design for the piezoelectric ceramic and elastic body of stator were calculated by the finite element method(FEM) that consider the resonance frequency, vibration mode and coupling efficiency etc. Through the result of vibration analysis from 6 order mode to 8 mode, the 7 order mode was gained very an excellent results that it was the coupling efficient, minimum power loss and bending vibration value. Here over 7 order mode, was acquired that an output current for input voltage was very a large increased results. The result of vibration calculation, from thickness 0.5[mm] to 2[mm], know the fact that the vibration displacement at 0.5[mm] is an high value too. From such analysis result, this paper was manufactured the ultrasonic motor of outer diameter 50[mm], inter 22[mm] having the about 43.86[KHz] resonance frequency. We have gated that a simulation result is 42.2[KHz] and an experiment result is 43.86[KHz]. Then, a propriety of this paper was established the result almost similar to though comparison, investigation of simulation and experiment result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.9-14
• /
• 2018

The function of gas springs is based on the compression of a gas. They are used in a wide variety of industries, and demand for them is increasing. Gas springs can be divided into compression and extension springs. Extension springs have not been studied much in relation to control of the piston speed, unlike compression springs. In this study, the magnitude of the piston rebound pressure was theoretically predicted by calculating the pressure loss in a double-cylinder extension gas spring. Numerical simulations of the piston behavior were carried out for small and large amounts of friction between the piston and the cylinder. FLUENT was used for the simulation with a 6-DOF model and UDF to simulate the behavior of the piston. The calculation regions of the front and rear of the piston were separated, and different types of grids were generated in the regions to implement a dynamic mesh using only a layering method. The results show that the piston returns with the target speed in both cases. However, the patterns of the piston behavior reaching the final speed are different.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.61-64
• /
• 2007

MPLS networks architectures have been prevailed as scalable approach to provide quality of service in the Internet. Many researches have been mainly focused on scalability and multi-path calculation scheme for failure restoration. However, the MPLS network have an scalability problem about traffic, and the existing failure restoration methods are wasted resources, and it has the problem that loss of a packet by a lot of delay occurs in too. Therefore in this paper, we propose a H-MPLS (Hierachical-Multiprotocol Label Switching)network for rapidly failure restorations and effective management of network extended. The proposed H-MPLS Network apply LSP multi-path routing algorithm and consists of several MPLS. After comparing the performance among the existing failure restoration methods with various network models, we use NS simulator in order to analyze the performance. Finally, we present an improvement scheme of the efficiency and scalability.

• Cartoon and Animation Studies
• /
• s.6
• /
• pp.91-115
• /
• 2002

Character industry in Korea has a history of less than 20 years by now, as it began in earnest at the end of the 1980s. Domestic character market is estimated to be around 1.2 trillion won occupying mere 0.01% of the world character market of 1,200 trillion won and less than 4% of the Japanese market, according to the according to the calculation made by Korea Animation Producers Association. Local character takes up only 5% of the domestic character market, necessitating the development of the local character and an increase in market share. It is painful to look at the current status of the local character market especially when compared with the huge world market. However, it might be and opportune moment for us to reverse the situation in our favor by a mental switchover. And we need to face up to the reality that the local character industry has many problems, and it is our duty to settle them. What then are the problems caused by the foreign character taking up 90% of the domestic market? Foreign character overwhelming the local market will bring about cultural dependency, emotional confusion, and financial loss caused by the payment of the royalties stemming from the intellectual property rights. The following is suggested as methods of settlement for such problems: 1. Development of character emotionally appealing to the Koreans 2. Development of long-lived character 3. Development of character firmly based on a good scenario 4. Thorough planning & marketing 5. Establishing an institution exclusively governing character business This study discussed the importance of developing long-lived character appealing not only to the Koreans but also to the whole world, that will meet the requirements as stated in 1 & 2 of above. For this purpose Chungmugong General Lee Soon-shin was chosen out of the Korean historical personages for further analysis, trying to rediscover the significance of the character development based on originality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.826-831
• /
• 2016

he land use, land-use change, and forestry (LULUCF) is one of the greenhouse gas inventory sectors that cover emission and removals of greenhouse gases resulting from land use such as agricultural activities and land use change. Particularly, LULUCF-Cropland sector consists of carbon stock changes in soil, $N_2O$ emissions from disturbance associated with land use conversion to cropland, and $CO_2$ emission from agricultural lime application. In this paper, we conducted the study to calculate the greenhouse gases emission of LULUCF-Cropland sector in South Korea from 1990 to 2014. The emission by carbon stock changes, conversion to cropland and lime application in 2014 was 4424, 32, and 125 Gg $CO_2$-eq, respectively. Total emission from the LULUCF-Cropland sector in 2014 was 4,582 Gg $CO_2$-eq, increased by 508% since 1990 and decreased by 0.7% compared to the previous year. Total emission from this sector showed that the largest sink was the soil carbon and its increase trend in total emission in recent years was largely due to loss of cropland area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.89-97
• /
• 2011

We analyze the performance of various techniques to overcome degradation of performance of STAP caused by nonhomogeneous clutter. The performance of NHD that used to eliminate outliers from nonhomogeneous clutter is improved by using the projection statistics(PS) that is robust to multiple outliers. The method of clutter covariance matrix estimation using a median value and the conventional method are also investigated and then compared. From the simulation results of STAP, the method of clutter covariance matrix estimation using a median value shows better performance than the conventional method for the calculation of the SINR loss, and MSMI for the single target and the multiple targets regardless of the NHD methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1147-1154
• /
• 2005

In this paper, we propose some PAPR(Peak to Average Power Ratio) reduction methods using WHT(Walsh Hadamard Transform) to reduce high PAPR generated in OFDM system because of multi carrier modulation. These proposed methods are the methods which has additional PAPR reduction performance without a loss of bandwidth efficiency and a large increment of calculation complexity than common PAPR reduction methods by combining the WHT with some common methods. In this paper, we propose two PAPR reduction methods made by combining a SLM(Selective Mapping) and DSI(Dummy Sequence Insertion) with a WHT. From simulation result, we can find that the PAPR reduction methods using a WHT can get about 1 dB additional PAPR reduction performance than common PAPR reduction methods; they are SLM and DSI. And, because our proposed methods have not only PAPR reduction effect, but also frequency diversity effect, more stabile data transmission is possible in nonlinear HPA and multipath fading channel.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.155-164
• /
• 2002

The journal bearings use in machine parts which move relative to each other and those reduce friction and wear of journals. The journal bearings are designed to operate in the hydyodynamic lubrication regime, but elastohydrodynamic lubrication nay occur if the pressures are too high or the running speeds are too low at machine elements. It is the phenomenon that the lubricant film is broken and some parts of surfaces are in rolling contact, so that wear will increase in mixed lubrication regime. The purpose of this study is to minimize the wear rate of journal bearings for extending machine life. The wear mate in mixed lubricated regime is selected as objective function because most of wear of the journal bearings develops in elastohydrodynamic lubrication. The journal bearings we represented by a bearing radius, shaft radius, and bearing width, but the bearing radius only is selected as design variables due to a bearing radius has an influence on friction loss, stability limit velocity, and film parameter, which are used as constraints. For numerical calculation, PLBA, that is a class of the RQP algorithm, is used.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.3
• /
• pp.158-165
• /
• 2018

Generally, container ships contain cargo holds with cell guides that serve to increase the container loading and unloading efficiency, minimize the space loss, and fix containers during the voyage. This paper describes a new quality management system for the cell guides of container ships (the so-called Trim Cell Guide system). The main functions of this system are the trimming of the point cloud obtained using a 3D scanner and an inspection simulation for cell guide quality. In other words, the raw point cloud of cell guides after construction is measured using a 3D scanner. Here, the raw point cloud contains a lot of noise and unnecessary information. Using the GUI interface supported by the system, the raw point cloud can be trimmed. The trimmed point cloud is used in a simulation for cell guide quality inspection. The RANSAC (Random Sample Consensus) algorithm is used for the transverse section representation of a cell guide at a certain height and applied for the calculation of the intervals between the cell guides and container. When the container hits the cell guides during the inspection simulation, the container is rotated horizontally and checked again for a possible collision. It focuses on a system that can be simulated with the same inspection process as in a shipyard. For a practicality review, we compared the precision data gained from an inspection simulation with the measured data. As a result, it was confirmed that these values were within approximately ${\pm}2mm$.