• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.125-129
• /
• 1992

When relaxation time will be distributed, TSC observed in the experimental procedure was analysed by using a potential model having two equilibrium positions and equations of dielectric properties was derived. Calculation of distribution was made by matrix method and compared/confirmed values obtained by TSC and alternating current which have a correspondence with each other. In this measurement, distribution of activation energy and relaxation time was determined by TSC peak at around 147k/364 of which center is 10$\^$-4/ sec/10$\^$5/ sec respectively at room temperature and also obtained dielctric loss factor at the range of 10$\^$-7/-10$\^$5/Hz. It seems that low temperature peak is local dispersion and high temperature peak have a relation to dielectric transition of the material.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.131-139
• /
• 2001

As increasing the accident of Distribution Transformer (DT), we need to manage them efficiently. In this paper, we discusses with the possibility of the diagnostic technique for distribution transformer using relative ageing rate calculation in this paper. The relative ageing rate of the DT could be calculated from the measured top oil temperature, ambient temperature and load current. In order on apply the proposed diagnostic technique we developed an on line Monitoring and Diagnostic System (MDS) which has hardware and software part. Diagnostic device is developed to measure the state information of DT and to send them with R/F(radio frequency) communication. Host computer monitors and saves the receive data. The database is constructed from the data of distributed DT and it is used for estimating loss-of-life in the MDS.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.123-130
• /
• 2015

This paper investigates the high efficiency operation of a switched reluctance generator over a wide speed range. The system efficiency is improved by optimizing the current shape. A modified angle position control (MAPC) method that can be used to optimize the current shape over a wide speed range is proposed. Simulation and experimental results are presented to validate the effectiveness of the proposed control scheme.

• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1342-1350
• /
• 1999

A new design procedure for micro cellular coverage prediction is presented here on this paper, which contains a new propagation analysis algorithm based on processing of vector data representing roads and buildings which mainly affect the propagation phenomena in micro-cell environments. The propagation analysis algorithm presented here has been developed to aim at the practical application for micro-cellular systems such as PCS or CE-2. As all the vectors used here are of closed poly lines, i.e., polygons, a simplified ray path search technique can be developed not only to determine if the calculation points are on the road polygons and but also to calculate the amount of blockage by buildings. The result shows a capability of predicting path loss with an RMS error of 5dB or lower.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.136-137
• /
• 2007

This paper discusses the methods for power loss calculation of designed high-speed PM synchronous motor in previous study: Part I. Moreover, the inverter, control strategy and test system set-up are also clarified. The detailed analysis and experimental results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.89-90
• /
• 2007

각 계약종별 부하곡선 통계로부터 과부하율에 따른 수명손실을 계산하였다. 75 [kVA] 변압기를 대상으로 하였으며, 변압기 온도 특성은 온도계가 설치된 변압기를 과부하 운전하여 취득된 과부하율에 따른 온도상승 경향을 적용하였으며, 대기온도는 지난 3년 간의 서울 경기지역의 최고온도를 적용하였다. 계산결과에 의하면 현재 적용중인 과부하율 130%로 운전하면 각 계약종별 년간 수명손실값은 산업, 일반, 교육, 주택용 순으로 각각 0.8, 0.89, 0.61, 0.36년 정도의 값을 가지는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.925-926
• /
• 2007

전자계 및 열/유동 해석 프로그램을 활용한 수치해석적 방법으로 변압기 외함의 자계손실과 온도상승을 계산하는 경우, 많은 시간이 소요되기 때문에, 설계 또는 고객 요구시 신속한 대응이 어렵다. 따라서 3차원 간이 계산법을 정립하여 신속 정확한 해석적 방법으로 접근할 필요가 있었다, 본 연구에서는 권선의 누설자속에 의해 발생하는 변압기 외함의 자계손실을 계산하고 이에 따른 온도상승을 추정하고자 하였다. 또한, 실제 변압기의 온도상승 시험을 통해 온도상승 계산 결과의 정확성을 검증하고자 하였다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.7-13
• /
• 2008

It is important to prevent roll failure in hot rolling process for reducing maintenance cost and production loss. The relationship between rolling pass schedule and the work roll wear profile will be presented. The roll wear pattern is related with roll catastrophic failure. The irregular and deep roll wear pattern should be removed by On-line Roll Grinder(ORG) for roll failure prevention. In this study, a computer roll wear prediction model under real process working condition is developed and evaluated with hot rolling pass schedule. The method of building wear calculation functions for center portion abrasion and marginal abrasion respectively was used to develop a work roll wear prediction mathematical model. The three type rolling schedule are evaluated by wear prediction model. The optimum roll grinding methods is suggested for schedule tree rolling technique.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.123-126
• /
• 2004

최근 석유공급의 불안정과 에너지 소비의 급격한 증가로 인하여, 국가적인 차원에서의 에너지 절약 사업이 주요 시책으로 추진 중에 있으며, 전력사업에서도 에너지 절감이라는 차원뿐만 아니라 경영에 직결되는 중요한 과제로 전력손실에 대한 관심이 높아져가고 있다. 특히, 전력시장 자유화라는 흐름 속에서 전력손실 문제는 전기요금의 산정에 있어서 합리적인 근거를 제시한다는 점에서 중요한 관심사항이 되고 있다. 본 논문에서는 배전손실을 정확하게 산정하는 방안을 마련하여, 배전사업자가 배전망을 효과적으로 운용하여 손실을 최소화할 수 있도록 유도하며, 전력공급 전반의 효율성을 향상시킬 수 있도록 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.223-225
• /
• 1998

This paper presents a new approach for power flow calculation, which minimizes the transmission losses in power systems with the control of voltage magnitudes on P-V nodes. In this approach, the transmission losses are re-distributed to each P-V node, at each iteration, to reduce the effect of slack. The steepest descent method is adopted, in this study, to minimize the transmission losses augmented with penalty functions to account for voltage constraints. IEEE 14 and 30 buses test systems were used for the performance demonstration of the proposed method in this paper. The simulation results showed that the proposed method can reduce transmission losses and improve voltage profiles of power systems.