• 한국안전학회지
• /
• 제9권4호
• /
• pp.119-124
• /
• 1994

The considerations in the noise control by enclosure are the rise of temperature and sound pressure, transmission loss, absorption coefficient of the materials, the structure of the soundproof panels, an opening and coincidence frequency. But it is very difficult that we obtain the accurate data about those in design, so, the noise reduction after enclosing does not correspond with the calculation. The difference of the noise reduction between the calculation and the measurement was 8.2dBA, and we can obtain the approximate result as the following formula which correct 10dBA, safely.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1053-1054
• /
• 2007

This paper represents technique of optimum efficiency calculation for condenser run type single phase induction motor considering utilization rate. The material cost and loss expense are major factor of proposed algorithm. The simulation results are compared with experimental ones. And they are agreement with each other.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.53-55
• /
• 1995

This paper presents the characteristics of linear induction motors fed by a voltage source PWM inverter. In the calculation, 2D finite element method is used considering the movement by moving mesh. Integro-differential approach is adopted for the copper loss calculation considering the skin effect.

• Journal of Electrochemical Science and Technology
• /
• 제2권1호
• /
• pp.20-25
• /
• 2011

This work focuses on the behavior of the overpotential increase due to a utilization rise in a molten carbonate fuel cell. The behavior is generally explained by Nernst loss, which is a kind of voltage loss due to the thermodynamic potential gradients in a polarization state due to the concentration distribution of reactant species through the gas flow direction. The evaluation of Nernst loss is carried out with a traditional experimental method of constant gas utilization (CU). On the other hand, overpotential due to the gas-phase mass-transport resistance at the anode and cathode shows dependence on the utilization, which can be measured using the inert gas step addition (ISA) method. Since the Nernst loss is assumed to be due to the thermodynamic reasons, the voltage loss can be calculated by the Nernst equation, referred to as a simple calculation (SC) in this work. The three values of voltage loss due to CU, ISA, and SC are compared, showing that these values rise with increases in the utilization within acceptable deviations. When we consider that the anode and cathode reactions are significantly affected by the gas-phase mass transfer, the behavior strongly implies that the voltage loss is attributable not to thermodynamic reasons, namely Nernst loss, but to the kinetic reason of mass-transfer resistance in the gas phase.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.162-177
• /
• 1998

Conentionally, LS factor for the USLE suggested by Wischmeier has been computed manually on topographic maps based on one dimensional approach. But outcomes of the equation could be severely affected by the convergence and divergence of surface runoff at complex terrains. Thus the objective of this research are to develop a method to automatically compute LS factor based on the multiple flow algorithm, and to test the accuracy of this method by comparing outcomes of this method to previous measurements or estimations of soil erosion. The program for the automatic calculation of LS factor was developed by utilizing Fox Pro 4.5, and outcomes of the program is designed to input to IDRISI. The accuracy test of LS factor was carried out by comparing the actual measurements of soil loss at two test sites in and around of Suwon. The calculated volume of soil erosion at Buju mountain, Mokpo, was also compared to the outcome of a previous research based on the LS factor calculated by the conventional onedimensional approach. The outcomes of this research are as follows. First, the computed L based on the multiple flow algorithm for concae slopes are greater than those of convex slopes,. Second, the estimated soil loss based on this method at the test site in Mokpo is much greater than the outcomes based on the conventional one-dimensional approach. It can e concluded that the application of this automatic calculation method of LS factor can improve the accuracy of USLE and facilitate soil erosion prevention methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.128-130
• /
• 2003

For electrical machine designers, core loss data are usually provided in the form of tables or curves of total loss versus flux density or frequency. The aim of this work is to propose a mathematical model for the iron losses prediction in soft magnetic material$ with any frequency and flux density. In this paper, three formulas for calculating the iron loss coefficients are discussed. And the coefficients are applied to calculate the iron loss of the 25kW high speed motor.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.93-98
• /
• 2012

Economics of available alternatives in the transmission planning are evaluated by the investment cost, loss cost and congestion cost. Congestion/loss cost is calculated in many years and many load levels by unit commitment of generators, optimal dispatch, load flow, judgement about transmission congestion and re-dispatch to reduce the congestion. The greatest difficulties to introduce variable optimization techniques on the transmission planning is the convergence of load flow. In this paper, economics in the transmission planning are evaluated using DC load flow, and case study is conducted on the Korea power system by proposed congestion/loss calculation methods.

• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1306-1313
• /
• 1999

본 논문은 CDMA PCS 이동통신 시스템의 망 설계를 위하여 거리에 따른 신호 감쇄 현상 분석 모델(변형된 Hata path loss model) 및 통계적 신호 강도 분포 모델(Log-Normal 분포)을 제시한다. 제시된 모델에 대구 산적동 및 수성동 지역의 측정 데이터를 적용하여 이들 지역에서 신호 강도의 세기가 임계치를 초과하는 지역의 백분율을 산출하여 망 설계의 기본 자료로 활용할 수 있도록 하였다.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.333-340
• /
• 1990

분산 송전송실정보에 의한 전력시스템의 경제운용=The transmission loss information produced in a line may be shared by both end buses connected to the line. Then, the loss may be seen as if it is discretely produced at both buses. Likewise, all transmission losses can be considered as if they are discretely produced at every bus distributed. The bus transmission loss equation can be defined, in which the loss information about connected lines are contained. This formulation can greatly enhance the computational efficiency for the economic control of both real powers and voltages. It requires solutions of two linear matrix equations, one for the calculation of incremental transmission losses and the other for the determination of voltage levels to be controlled. The Proposed approach is demonstrated through three sample systems and it is found that the solutions can be obtained after three iterations regardless of system sizes. This implies that only one-step search would be required for the solution if real informations would be available. Results are compared with those of optimal power flows.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.20-22
• /
• 2000

The transmission networks are not perfect conductors and a percentage of the power generated is therefore lost before it reaches the loads. This network loss contributes to the cost of suppling power to consumers, and must be considered if the most efficient dispatch and location of generators and loads is to be achieved. In this paper, we propose an approximate calculation of marginal loss factors to analyze characteristics of regional transmission loss. These static marginal loss factors are approximately calculated based on the KEPCO's expected summer peak load data of year 2000.