• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.1
• /
• pp.23-30
• /
• 2005

The air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The air-jet weaving involves inserting a pre-measured length of yarn through the wraps, which is shed by means of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for improving the loom performance. In this paper, we examined the effects of the main nozzle with different acceleration tubes as well as diameters. Also, we compared the performance of a straight-type tube with a Laval-type tube and the effect of installing a suction hole on the acceleration tube.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.16-23
• /
• 2003

The Air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The Air-jet weaving involvers, inserting a pre-measured length of yam through the wrap, is sheds by meads of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for the loom performance. h this paper We examined the effect of the main nozzle with different acceleration tubes as well as diameters. And also, we compared the performance of straight type tube with laval type tube and of according to be suction hole on the acceleration tube, respectively.

• 연구논문집
• /
• s.30
• /
• pp.101-110
• /
• 2000

Weft insertion mechanism is for completing the structure of yarn and weft yarn and its driving method is screw type. In the high speed rapier loom, weft yarn is thrown by insert rapier and carrier rapier into the shed which make divide two parts of upper part ant lower part for warp yarn. It is possible for this mechannism to reduce the size of rapier and wheel, and directly connected to the main shaft without gear belt. Therefore, exact rapier motion through realization of arbitrary acceleration diagram requested rapier and optimal design for high speedization and operating rate increasing are necessary. In this study, with a view to exact system analysis for understanding of overall trace and high speedization of rapier loom through computer simulation. we report not only deduction of displacement, velocity, and acceleration components of rapier for analysis theory establishment, of weft insertion mechanism and exact motion induction according to screw rotation, but also development of simulation program for realization these on the monitor.

• 연구논문집
• /
• s.28
• /
• pp.89-100
• /
• 1998

This paper deals with the design and analysis of a beating cam. The beating device of a high speed rapier loom, weaving fabric by completion of warp-weft patterns, is driven by double cam type on the same axis. As the double cam, coupled with two cams, performs the mutual conjugate motion, the double cam must be very preciously designed for smooth. For the shape design of a double cam, an instant velocity center method is proposed. This method can determine the cam profile from the contact conditions of the cam and roller follower and the velocity relationships at the instant velocity center. And the practical applicability was verified by developing “DISKCAM of a CAD program. As the results in this paper, the shapes of two cams, which are in the conjugate motion, are designed by instant velocity center method. We applied 8-order polynominals for the beating as displace¬ment curves for shape determination of double cams. The data of displacement, velocity, and acceleration of beating cam can be used adjust in accurate operation and to develope an advanced beating device.

• The Research Journal of the Costume Culture
• /
• v.22 no.1
• /
• pp.16-27
• /
• 2014

This study investigated the characteristics of and changes in hemp textile production practices at Gurye in Jeollanam-do in modern times. To do this, in this study, both a literature review and fieldwork research were utilized as research methods. The literature review focused on Gurye's hemp data, and the fieldwork research involved two separate trials. Male and Female residents of Gurye who had experience in the area of hemp production from the 1920s to the 1980s participated in this study. The results were as follows. First, regarding hemp fiber cultivation in Gurye, hemp cultivation continued to the 1970s and there were no changes in hemp cultivation practices during the Japanese colonial-era. Second, there have been very important changes in hemp kilns over time. In the 1950s, there were both single-body kilns and separate-body kilns in Gurye. Later, specifically in the 1950s, a new type of kiln using an iron pot appeared, and the most modern kilns were concrete structures. Third, in Gurye, women cooperatively removed hemp husks immediately after stemming, subsequently bleaching the hemp by soaking it in lye or caustic soda. Over time, there have been changes in ash types and in soaking periods. Fourth, loom types changed from the traditional Korean back-strap loom to the treadle loom in the 1930s- to 1940s. Fifth, since the 1970s, the hemp textile output levels of Gurye have been reduced due to the westernization of clothing styles, the inflow of Chinese hemp fiber and government regulations pertaining to hemp cultivation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.2
• /
• pp.102-112
• /
• 2003

This study was carried out to research and develop a shallow green rooftop system which would require low maintenance and therefore could be used for existing rooftops. To achieve these goals, the conceptual model was induced by past studies and the experimental systems were deduced from the conceptual model. On the growth of Sedum sarmentosum grown in these rooftop systems, the effects of artificial substrate type, soil depth, and drainage type were investigated from 3 April to 11 October 2002. Artificial substrates were an alone type and a blending type. The alone type was an artificial substrate formulated by blending crushed porous glass with bark(v/v, 6:4). The blending type was formulated by blending the alone type with loam(v/v, 1:1). Soil depths were 5cm, loom, and 15cm. Drainage types were a reservoir-drainage type and a drainage type. The reservoir-drainage type could keep water and drain excessive water at the same time. The drainage type could drain excessive water but could not keep water. Covering area, total fresh and dry weight, visual quality, and water content per 1g dry matter were measured. All the variables were analyzed by correlation analysis and factor analysis. The results of the study are summarized as follows. The growth increment was higher in the blending type than in the alone type, the highest in loom soil depth and higher in the reservoir-drainage type than in the drainage type. The growth quality was higher in the blending type than in the alone type, the highest in l0cm soil depth, and higher in the drainage type than in the reservoir-drainage type. In consideration of the permissible load on the existing rooftops and the effects of the treatments on the growth increment and quality, the system should adopt the blending type in artificial substrate types, 5~10cm in soil depths, and the drainage type in drainage types. This system will be well-suited to the growth of Sedum sarmentosum, and when the artificial substrate was in field capacity, the weight will be 75~115kg/$m^2$.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.167-172
• /
• 2004

A method for the design of a disk cam with a remote follower is presented. ADAMS software is utilized for the design process. The whole process is applied for the design of a cam profile to be used in a tappet shedding device of a shuttle loom. First the desired motion of the remote follower, the hearld frame in this case, is determined to improve the characteristic of a certain weaving process. Next, the desired displacement data is input to the ADAMS software and the cam profile is obtained as an output. To test the validity of the proposed method, designed cams were actually manufactured and implemented on a experimental loom. And with the help of potentiometer type displacement transducers, the motion of the remote followers were actually recorded. And the result was sufficient to prove the validity of the presented method.

• 연구논문집
• /
• s.22
• /
• pp.75-83
• /
• 1992

The beating motion of a high speed shuttleless loom is driven by cams. Two cams become one system and their shaft laid across each other. Moreover, the shape of the cams is very complex and requires high precision for successful weft insertion and good interlacing with warp yarn. The iterative contact method is developed for use in design and analysis of the driving mechanism of a disk type cam with oscillating roller follower. The optimum design is performed by utilizing a CAD program, DISKCAM. The 8th order polynomial is selected to interpolate the desired shape trajectory of the cam, the optimal shape of the cams is defined based on the demension of the follower. The kinematic motion of the beating cam mechanism is investigated. The phase angle is determined to achive harmonious cam motions

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.844-859
• /
• 2013

This study investigated the characteristics and changes of cotton and silk textile production in Honam district, especially in Gurye, Jella Province from the 1930s to the 1980s. To do this, research method in this study was both literature and fieldwork research and results were as follows. First, in terms of cotton fiber cultivation of Gurye, Chinese Cotton(在來綿) has been substituted for America Cotton(陸地綿) and additionally, Yellow Cotton (黃綿) has been cultivated in the 1930s. Also, in terms of silk fiber cultivation of Gurye, Joseon Silkworm has been substituted for Japanese Silkworm by inflowing the Japanese mulberry tree. Second, in terms of spinning method, cotton spinning has been conducted at every house by an individual tool from the 1930s to the 1950s and has been gradually changed to mechanization by market shop equipped with mechanized cotton gin and cotton whipping tool. However, there have been no changes in silk spinning method from the 1930s to the 1980s. Third, loom type has been changed from the traditional Korean back-strap loom to the treadle loom between the 1930s and the 1940s. Fourth, dyeing was conducted by chemical dyestuff after weaving. The circulation of textile was done through the joint market by Japan in the 1930s~1950s and has changed to the market sales by producers since the 1950s. Fifth, since the 1970s, the outputs of cotton and silk textile of Gurye have been reduced. This was connected with the westernization and the inflow of the synthetic fiber and cloth in cotton and was related to the changes of the nation policy and silk fiber inflow from the china to the Korean farm villages.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.120-125
• /
• 2000

A heddle frame is the major part of a loom that produces woven cloth by insertion of weft yarns between warp yams. Warp yarns are manipulated by many heddles fixed in a heddle frame. Recently, the up and down speed of heddle frames has been increased much for the increase of productivity, which induces higher inertial stresses and vibrations in the heddle frame. The heddle frame has the rectangular cross-section. For the design of box type beams of rectangular cross-section, extensional stiffness EA, flexural stiffness El, and torsional stiffness GJ as well as the vibration characteristics are important and should be simultaneously considered. Tn this paper, the vibration characteristics of the composite and the composite sandwich beams for high-speed heddle frame were tested by impulse frequency response.